SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE: 

National Certificate: Food and Beverage Processing: Oil Milling 
SAQA QUAL ID QUALIFICATION TITLE
20200  National Certificate: Food and Beverage Processing: Oil Milling 
ORIGINATOR ORIGINATING PROVIDER
SGB Food   
QUALITY ASSURING BODY NQF SUB-FRAMEWORK
FOODBEV - Food and Beverages Manufacturing Industry Sector Education and Training Authority  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National Certificate  Field 06 - Manufacturing, Engineering and Technology  Manufacturing and Assembly 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  140  Level 3  NQF Level 03  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Passed the End Date -
Status was "Reregistered" 
SAQA 0480/09  2009-07-01  2012-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2013-06-30   2016-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
A person acquiring this qualification will be able to manufacture a safe, quality extracted and filtered oil by operating, controlling and maintaining an oil mill, from the handling and preparation of raw materials until the oil is milled and ready for further processing.

This qualification will contribute to the full development of the learner with in the food and beverages processing environment by providing recognition, further mobility and transportability within the field of manufacturing and assembly. The skills, knowledge and understanding demonstrated within this qualification are essential for social and economic transformation and contribute to the upliftment and economic growth within the food and beverage manufacturing and processing environment.


Rationale of the qualification

This qualification reflects the workplace-based needs of the edible oil milling industry that are expressed by employers and employees, both now and for the future. This qualification provides the learner with accessibility to be employed within the food-oil and -fat manufacturing industry. The qualification further provides the flexibility to articulate in the oil refinery and the manufacturing of fat and oil based products and packaging environment.

The qualification and the level of flexibility within the range of electives will allow the individual to pursue a specialised career in a oil milling related environment, food and beverage packaging, food and beverage quality control and assurance, food and beverage manufacturing management, food and beverage manufacturing supervision and food and beverage process artisan. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
A knowledge, comprehension and application of language, mathematics, natural science and technology principles at NQF level 1 and 2.

Recognition of prior learning:

This qualification may be achieved in part or completely through the recognition of prior learning, which includes formal, informal and non-formal learning and work experience. 

RECOGNISE PREVIOUS LEARNING? 

QUALIFICATION RULES 
  • Fundamental: 39 credits
  • Core: 60 credits
  • Elective: a minimum of 41 credits
    Total: 140 credits 

  • EXIT LEVEL OUTCOMES 
    Qualifying learners can:

    1. Prepare and grade food raw materials for conditioning of oil plant seeds.
    2. Manufacture filtered oil from an edible food grade oil plant seed
    3. Bulk packaging of filtered oil.
    4. Maintain food safety, good manufacturing principles and quality assurance practices in oil milling manufacturing environment. 

    ASSOCIATED ASSESSMENT CRITERIA 
    1.1 Apply knowledge and comprehension regarding the nature of oils and fats and its transformation into oil and fat based products.
    1.2 Oil plant seeds and other process related food raw materials are received, graded and stored according to standard operating procedures.
    1.3 Oil plant seeds and other process related food raw materials are prepared for the conditioning according to standard operating procedures.

    2.1 Oil from oil plant seeds are conditioned and extracted using a continuous production operation according to standard operating procedures.
    2.2 Conditioned oil are extracted, degummed and filtered using a solvent extracting method.
    2.3 The compositional quality of the filtered oil is verified according to standard operating procedures.

    3.1 Bulk containers for filtered oil products are filled and sealed according to standard operating procedures. Perform 1 product and 1 packaging material changeovers.
    3.2 Quality control checks are done on closed products according to standard operating procedures.
    3.3 Where filling and closing takes place simultaneously with other production processes, it is synchronized according to standard operating procedures.

    4.1 Apply knowledge and comprehension of occupational health, safety and environmental legislation relevant to the oil milling industry according to standard operating procedures.
    4.2 Apply knowledge and comprehension of food safety practices and procedures in oil milling according to standard operating procedures.
    4.3 Apply knowledge and comprehension of heating and cooling procedures used in an oil milling environment.
    4.4 The temperature of raw materials, final products and their environment is monitored and controlled for quality control purposes.
    4.5 Oil milling quality assurance practices are monitored and controlled according to standard operating procedures.
    4.6 Food manufacturing equipment and surfaces are cleaned and sanitised according to standard operating procedures.


    Integrated Assessment

    The applied competence (practical, foundational and reflexive competencies) of this qualification will be achieved if a candidate is able to manufacture a safe, quality extracted and filtered oil by operating, controlling and maintaining an oil mill, from the handling and preparation of raw materials until the oil is milled and ready for further processing.

    The identifying and solving of problems, team work, organising one-self, the using of applied science, the implication of actions and reactions in the world as a set of related systems must be assessed during any combination of practical, foundational and reflexive competencies assessment methods and tools to determine the whole person development and integration of applied knowledge and skills.

    The preparation to processing, cleaning and sanitising, first line maintenance and quality assurance related to processing in the workplace can be assessed in one application.

    Applicable assessment tool(s) to establish the foundational, reflective and embedded knowledge to problem solving and application of the world as a set of related systems within the processing environment.

    A detailed portfolio of evidence is required to proof the practical, applied and foundational competencies of the learner.
    Assessors and moderators should develop and conduct their own integrated assessment by making use of a range of formative and summative assessment methods. Assessors should assess and give credit for the evidence of learning that has already been acquired through formal, informal and non-formal learning and work experience.

    Unit standards in the qualification must be used to assess specific and critical cross-field outcomes. During integrated assessments the assessor should make use of formative and summative assessment methods and should assess combinations of practical, applied, foundational and reflective competencies. 

    INTERNATIONAL COMPARABILITY 
    Benchmarking was done against the NVQ from Britain, SVQ from Scotland as well as Australian and New Zealand qualifications. International comparability could be found for a qualification on this level. On the New Zealand Qualifications Authority Framework a National Certificate in Food and related processing level 3 could be found to support this qualification. 

    ARTICULATION OPTIONS 
    This qualification will enable the qualifying candidate to progress to learning for other national certificates in food and beverages processing on NQF 3 since the exit level outcome maintain food safety, good manufacturing principles and quality control practices in a food manufacturing environment and unit standard on first line maintenance are core to all the national certificates in food and beverages processing on NQF 3.

    This qualification provides entry to qualifications in food and beverage manufacturing supervision, food and beverage quality control and assurance, food and beverage manufacturing management, food and beverage manufacturing supervision and food and beverage process artisan. 

    MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Qualification must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed immediately below.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards, exit level outcomes as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    For an applicant to register as an assessor, the applicant needs:
  • Well developed interpersonal skills, subject matter and assessment experience.
  • The assessor needs to be competent in the planning and conducting assessment of learning outcomes as described in the unit standards Plan and conduct assessment of learning outcomes NQF level 5. The subject matter experience must be well developed with in the field of oil milling.
  • A similar qualification with a minimum of 6 -12 months field experience after he/she has completed the qualification, or
  • A food science or technology qualification on level 6 or higher.
  • The subject matter experience of the assessor can be established by recognition of prior learning.
  • Assessors need to be registered with the Food and Beverage Education and Training Quality Assurance Body.
  • Detailed documentary proof of educational qualification, practical training undergone, and experience gained by the applicant must be provided (Portfolio of evidence) 

  • NOTES 
    N/A 

    UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  114366  Demonstrate an understanding of occupational health, safety and environmental legislation relevant to the food or beverage environment  Level 2  NQF Level 02 
    Core  8826  Condition and express oil from oil plant seeds  Level 3  NQF Level 03  15 
    Core  9042  Demonstrate an understanding of food or beverage safety practices and procedures in the food or beverage manufacturing environment  Level 3  NQF Level 03 
    Core  8803  Demonstrate an understanding of heating and cooling procedures  Level 3  NQF Level 03 
    Core  9586  Extract a metal from a solution by means of solvent extraction  Level 3  NQF Level 03 
    Core  9044  Monitor and control quality assurance practices in a food or beverage manufacturing environment  Level 3  NQF Level 03 
    Core  12316  Perform first line maintenance on manufacturing or packing equipment  Level 3  NQF Level 03 
    Core  8804  Store and route food raw materials and products  Level 3  NQF Level 03 
    Core  9069  Demonstrate understanding of the nature of edible oils and fats and its transformation into commercial oil and fat based products  Level 4  NQF Level 04 
    Fundamental  9122  Demonstrate knowledge of introductory principles of chemistry and physics  Level 2  NQF Level 02 
    Fundamental  8968  Accommodate audience and context needs in oral communication  Level 3  NQF Level 03 
    Fundamental  8969  Interpret and use information from texts  Level 3  NQF Level 03 
    Fundamental  9012  Investigate life and work related problems using data and probabilities  Level 3  NQF Level 03 
    Fundamental  7567  Produce and use spreadsheets for business  Level 3  NQF Level 03 
    Fundamental  8973  Use language and communication in occupational learning programmes  Level 3  NQF Level 03 
    Fundamental  7456  Use mathematics to investigate and monitor the financial aspects of personal, business and national issues  Level 3  NQF Level 03 
    Fundamental  8970  Write texts for a range of communicative contexts  Level 3  NQF Level 03 
    Elective  9071  Bulk fill and close food or beverage products in containers  Level 1  NQF Level 01 
    Elective  8822  Clean and sanitise a food processing system using an automated cleaning in-place-system  Level 2  NQF Level 02 
    Elective  12258  Identify computerised systems in a manufacturing or processing system  Level 2  NQF Level 02 
    Elective  8766  Mix or blend food raw materials for processing using automated equipment  Level 2  NQF Level 02 
    Elective  12315  Demonstrate an understanding of basic machine operations in a manufacturing and or packaging environment  Level 3  NQF Level 03 
    Elective  9013  Describe, apply, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts  Level 3  NQF Level 03 
    Elective  8863  Dry mill a food product  Level 3  NQF Level 03 
    Elective  8764  Fumigate food raw materials before further processing  Level 3  NQF Level 03 
    Elective  8782  Grade and sort food raw materials  Level 3  NQF Level 03 
    Elective  9062  Monitor the temperature of food products and their environment for quality control purposes  Level 3  NQF Level 03 
    Elective  9047  Receive food raw materials  Level 3  NQF Level 03 
    Elective  9070  Toast a food product in an oven toaster  Level 3  NQF Level 03 
    Elective  9046  Determine the quality of food products using sensory evaluation  Level 4  NQF Level 04  10 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Quality Assuring Bodies have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Quality Assuring Body should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.