SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE: 

National Certificate: Welding Application and Practice 
SAQA QUAL ID QUALIFICATION TITLE
24213  National Certificate: Welding Application and Practice 
ORIGINATOR
SGB Welding 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
MERSETA - Manufacturing, Engineering and Related Services Education and Training Authority  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National Certificate  Field 06 - Manufacturing, Engineering and Technology  Manufacturing and Assembly 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  174  Level 3  NQF Level 03  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Passed the End Date -
Status was "Registered" 
SAQA 0151/03  2003-12-03  2006-12-03 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2007-12-03   2010-12-03  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification is replaced by: 
Qual ID Qualification Title Pre-2009 NQF Level NQF Level Min Credits Replacement Status
57886  National Certificate: Welding Application and Practice  Level 3  NQF Level 03  151  Complete 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
The purpose of this Qualification is to provide learners, education and training providers and employers with the standards and the range of learning required to work effectively in the welding industry and to meet the challenges of such an environment.

This Qualification recognises the skills, knowledge and values acquired by learners involved in welding. The chief skill that is recognised in this Qualification is the ability to weld and cut materials to create a product, using a range of welding methods. This capability requires an understanding of complex welding tools and equipment, combination processes and concepts of measurement. Hand skills play a role in this Qualification.

This Qualification requires that learners qualify in complex integrated welding practice and theoretical knowledge during the manufacturing and assembling process as specified by Industry.

Qualified learners will also understand:
  • The basics of how a business functions
  • Their role in the business
  • How they are affected by legislation, regulations, agreements and policies related to their particular work environment
    With this understanding, learners will be able to participate in workplace activities.

    What learners achieve in this Qualification will also serve as a basis for further learning where they will further develop their skills and knowledge to include more complex welding processes, equipment and techniques, and the interpretation of engineering drawings for welding purposes.

    Rationale for the Qualification:

    This is the second Qualification in a series for learners who want to follow a career in welding. This Qualification focuses on developing skills and knowledge necessary to begin such a career.

    The welding industry operates in a competitive and challenging environment. The finished processes have to respond to a wide variety of exacting customer and consumer requirements. In addition, the industry has to respond to international competition and environmental issues.

    Welding application and practice require joining and cutting of materials that meet national and international requirements. Welding generally requires the joining of material that is subjected to considerable stress when in operation and the welding process needs to be consistent and accurate.

    There were previously no formal recognised Qualifications for this industry. This Qualification forms part of a series at different levels to create opportunities for development, a career path and greater security of employment within the welding industry.

    This Qualification enables learners who have gained relevant experience in the workplace to obtain credits through the RPL process. This Qualification also forms the basis for further development in polymeric composites fabrication in particular and the plastics manufacturing industry in general. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    This Qualification assumes learners have a National Certificate in Welding Application and Practice, NQF Level 2.

    Recognition of prior learning:
    This Qualification may be obtained through RPL. The learner should be thoroughly briefed on the mechanism to be used and support and guidance should be provided. Care should be taken that the mechanism used provides the learner with an opportunity to demonstrate competence and is not so onerous as to prevent learners from taking up the RPL option towards gaining a Qualification. 

    RECOGNISE PREVIOUS LEARNING? 

    QUALIFICATION RULES 
    N/A. 

    EXIT LEVEL OUTCOMES 
    1. Demonstrate an ability to produce components of some complexity using a variety of welding processes and operations, meeting output requirements and working safely with due care for fellow workers and the environment.
    2. Demonstrate an ability to select and apply appropriate inspection methods to determine component compliance with specifications.
    3. Select appropriate procedures to solve familiar problems within a fabrication environment and operate within clearly defined contexts, with some scope for personal decision-making and responsibility.
    4. Contribute to workgroup efforts and support the maintenance of a safe, effective and efficient workplace.
    5. Demonstrate the ability to communicate with peers and members of supervisory / management levels and to use information gathered and summarised from a range of sources to produce simple written reports.
    6. Demonstrate an understanding of options for further learning in this or a related field of learning and preparation requirements for such learning. 

    ASSOCIATED ASSESSMENT CRITERIA 
    1. > Output and quality requirements are met
  • Welding time limits are adhered to.
  • Safe working practices are adhered to.
  • Can respond to questions and discuss issues related to the theoretical principles of various welding processes and methods and their respective operations at this level.

    2. > Appropriate inspection methods are chosen and applied.
  • Can respond to questions and discuss issues related to various inspection methods and procedures and the principles underpinning such methods.

    3. > Appropriate procedures are selected to solve problems in an efficient and effective manner.
  • Unfamiliar problems are accurately reported to appropriate personnel.
  • Can respond to questions and discuss issues related to familiar problems in the welding of work pieces.

    4. > Production schedules and assignments are met.
  • Production workflow is managed efficiently.
  • Safe working practices are adhered to.
  • Workgroup goals are met.
  • Assistance and support is provided where required.
  • Active participation in workgroup discussions, in workgroup problem solving activities and in the implementation of solutions.
  • Relevant information is received and passed on.

    5. >Information is gathered from a range of sources and accurately summarised.
  • Information is clearly presented in a timely manner in the required format to appropriate parties.
  • Relationships with peers and supervisory / management levels are established and functioning.

    6. > Options are explained.
  • Preparation requirements are explained.

    Integrated Assessment:

    Integrated assessment at the level of the Qualification provides an opportunity for learners to show they are able to integrate concept, actions and values achieved across a range of Unit Standards and contexts. Integrated assessment must evaluate the quality of observable performance as well as the thinking behind the performance.

    Some assessment aspects will demand practical demonstration while others may not. In some cases inference will be necessary to determine competence depending on the nature and context within which performance takes place.
    Assessors will collect evidence of the learner's competence by:
  • Observing the learner at work (both in primary activities as well as other interactions) or by relevant simulations.
  • Asking questions and initiating short discussions to test understanding.
  • Looking at records and reports.

    The learner may choose in which language s/he wants to be assessed. This should be established as part of a process of preparing the learner for assessment and familiarising the learner on the approach being taken.

    Since this is a foundational Qualification, it is necessary to ensure that the fundamental part of the Qualification is also targeted to ensure that while the competence may have been achieved in a particular context, learners are able to apply it in a range of other contexts and for further learning. The assessment should also ensure that the critical cross-field outcomes have been achieved. 

  • INTERNATIONAL COMPARABILITY 
    This Qualification was compared with the National Certificate in Engineering - Fabrication (level 4) with specialist strands in Heavy Fabrication, Light Fabrication and Welding from the Engineering Training Organisation. There are 320 different Unit Standards registered from level 1 to level 4 on the New Zealand National Qualifications Framework (NZNQF). These Unit Standards were packaged to form three different Qualifications. The Welding Qualification is pitched on level 4 with a total credit value of 275. The Unit Standards are fairly small and consist of 2 to 3 elements (specific outcomes). It is also very task based. 

    ARTICULATION OPTIONS 
    The Qualification has been designed and structured so that qualifying learners can move from one context to another. Employers or institutions should be able to evaluate the outcomes of this Qualification against the needs of their context and structure top-up learning appropriately. Equally, holders of other Qualifications may be evaluated against this Qualification for the purpose of RPL. 

    MODERATION OPTIONS 
  • Anyone assessing a learner against this Qualification must be registered as an assessor with the relevant ETQA.
  • Any institution or learning provider offering learning towards the achievement of this Qualification should be accredited as a provider with the relevant ETQA.
  • Moderation of assessment should be overseen by the relevant ETQA according to the moderation guidelines provided for in this Qualification as well as the agreed ETQA guidelines. 

  • CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    The following criteria should be applied by the relevant ETQA:

    1. Appropriate Qualification in the field of welding application and practice at NQF level 4 and a minimum of 2 years' experience in the welding industry. The subject matter experience of the assessor can be established by recognition of prior learning.
    2. Appropriate experience and understanding of assessment theory, processes and practices.
    3. Good inter-personal skills and the ability to balance the conflicting requirements of:
  • Maintaining national standards
  • The interests of the learner
  • The need for transformation and redressing the legacies of the past
  • The cultural background and language of the learner
    4. Registration as an assessor with the relevant ETQA. 

  • NOTES 
    This qualification has been replaced by qualification 57886, which is "National Certificate: Welding Application and Practice", Level 3, 151 credits. 

    UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  14705  Cut material using the oxy-fuel pipe cutting device  Level 3  NQF Level 03  10 
    Core  14703  Cut material using the oxy-fuel profile cutting machine  Level 3  NQF Level 03  10 
    Core  14711  Cut material using the oxy-fuel straight-line cutting machine  Level 3  NQF Level 03  10 
    Core  12457  Develop learning strategies and techniques  Level 3  NQF Level 03 
    Core  9526  Manage basic business finance  Level 3  NQF Level 03 
    Core  9530  Manage work time effectively  Level 3  NQF Level 03 
    Core  14718  Perform destructive testing on welded specimens  Level 3  NQF Level 03  10 
    Core  116720  Show understanding of diversity in the workplace  Level 3  NQF Level 03 
    Core  9533  Use communication skills to handle and resolve conflict in the workplace  Level 3  NQF Level 03 
    Core  12255  Weld workpieces with the gas metal arc welding process in all positions  Level 3  NQF Level 03  15 
    Core  12247  Weld workpieces with the oxy-acetylene welding process in all positions  Level 3  NQF Level 03 
    Core  14692  Weld pipes with combination weld processes using gas tungsten arc welding and gas metal arc welding  Level 4  NQF Level 04 
    Core  12256  Weld pipes with the gas tungsten arc welding process in all positions  Level 4  NQF Level 04  20 
    Core  14680  Weld work piece with combination weld processes using shielded metal arc welding and gas tungsten arc welding  Level 4  NQF Level 04 
    Core  12254  Weld workpieces with the shielded metal arc welding process in all positions  Level 4  NQF Level 04  25 
    Fundamental  8968  Accommodate audience and context needs in oral communication  Level 3  NQF Level 03 
    Fundamental  9528  Communicate with clients  Level 3  NQF Level 03 
    Fundamental  9529  Compile feasibility and commissioning reports  Level 3  NQF Level 03 
    Fundamental  9010  Demonstrate an understanding of the use of different number bases and measurement units and an awareness of error in the context of relevant calculations  Level 3  NQF Level 03 
    Fundamental  9013  Describe, apply, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts  Level 3  NQF Level 03 
    Fundamental  8969  Interpret and use information from texts  Level 3  NQF Level 03 
    Fundamental  9012  Investigate life and work related problems using data and probabilities  Level 3  NQF Level 03 
    Fundamental  7456  Use mathematics to investigate and monitor the financial aspects of personal, business and national issues  Level 3  NQF Level 03 
    Fundamental  8970  Write texts for a range of communicative contexts  Level 3  NQF Level 03 
    Elective  12484  Perform basic fire fighting  Level 2  NQF Level 02 
    Elective  12483  Perform basic first aid  Level 2  NQF Level 02 
    Elective  14707  Gouge material with air-carbon-arc gouging process  Level 3  NQF Level 03  10 
    Elective  8039  Operating cranes  Level 3  NQF Level 03  10 
    Elective  8038  Operating lift trucks  Level 3  NQF Level 03 
    Elective  14695  Remove material with the shields metal arc gouging process  Level 3  NQF Level 03 
    Elective  14719  Weld with flux-core welding process in all positions  Level 3  NQF Level 03 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
    When qualifications are replaced, some of their learning programmes are moved to being recorded against the replacement qualifications. If a learning programme appears to be missing from here, please check the replacement.
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Black Eagle Training (PIETERMARITZBURG) (TP) 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.