SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Implement techniques to finish and dress footwear 
SAQA US ID UNIT STANDARD TITLE
11371  Implement techniques to finish and dress footwear 
ORIGINATOR
SGB Footwear Manufacturing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  42 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This standard is in the elective category of the NQF Level 4 National Certificate in Footwear technology. Learners assessed competent against this standard will be able to finish footwear using a range of advanced machines and equipment through finishing and dressing footwear, setting and adjusting a range of machines, coaching fellow employees as well as organising the workflow of processes. Learners involved in finishing and dressing will use this standard. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
Learners will have attained the NQF Level 2 National Certificate in Footwear processes. 

UNIT STANDARD RANGE 
Applicable to welted and other constructions:
Machines used for finishing will include:
  • Loose nailer.
  • Rough rounder.
  • Stitching.
  • Heel scourer.
  • Heel attacher.
  • Heel pairer.
  • Edge trimmer.
  • Ploughing.
  • Channel opener.
  • Channel closer.
  • Leveller.
  • Edge setter.
  • Seat wheeler.
  • Heel padder.
  • Bottom scourer.
  • Bunker.
  • Nibbler.
    Setting and adjusting will apply to all machines used to finish footwear. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Finishing and dressing footwear using machinery and equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Advanced machinery and equipment specifications are identified and understood applying manufacturers specifications. 

    ASSESSMENT CRITERION 2 
    2. Appropriate selection of machine operations is demonstrated in finishing a shoe in compliance with standard operating procedures. 

    SPECIFIC OUTCOME 2 
    Setting and adjusting a range of finishing machines. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Machines and equipment specifications relevant to finishing processes are correctly identified and understood. 

    ASSESSMENT CRITERION 2 
    2. Different equipment for specific product types is identified in accordance with enterprise standard operating procedures. 

    SPECIFIC OUTCOME 3 
    Coaching others to perform tasks relating to finishing and dressing of footwear uppers and bottoms. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. The principles of effective coaching are understood and effectively implemented applying specified coaching techniques. 

    ASSESSMENT CRITERION 2 
    2. The ability to coach a fellow employee to perform a new skill is demonstrated on any one selected machine according to standard operating procedures. 

    SPECIFIC OUTCOME 4 
    Organising the workflow of a process to finish footwear. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. A workflow of processes is organised where relevant processes pertaining to finishing processes is considered applying industry norms. 

    ASSESSMENT CRITERION 2 
    2. Different consumables are identified according to specific product types in accordance with enterprise standard operating procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The relevant Sector Education and Training Authority or Education and Training Quality Assurance Body will carry our accreditation of learning against this standard. Assessment will be conducted by registered assessors. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The demonstrated understanding of:
  • Coaching techniques, providing feedback and measuring a persons application of a new skill.
  • Operating procedures of a range of machines used to finish footwear.
  • The finishing process as it relates to the complete process of manufacturing a range of footwear products. 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems for machines, making settings and adjustments. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and ones activities ensuring the optimisation of workflow throughout a process. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology, using a range of machines and equipment. 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  22211   National Certificate: Footwear Technology  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.