SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Install explosion barriers to control the propagation of coal dust explosions 
SAQA US ID UNIT STANDARD TITLE
115090  Install explosion barriers to control the propagation of coal dust explosions 
ORIGINATOR
SGB Occupational Health and Safety 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 09 - Health Sciences and Social Services Preventive Health 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular-Fundamental  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard requires learners to be able to install explosion barriers to control the propagation of coal dust explosions. Learners credited with this unit standard are capable of:
  • Explaining the specified requirements pertaining to the installation of explosion barriers.
  • Preparing to install explosion barriersInstalling explosion barriers.
  • Performing post-installation activities. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The ability to read and write at ABET level 3 or equivalent will facilitate better understanding and proficiency in this unit standard. 

    UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria. The scope includes underground roadways in a coalmine. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the specified requirements pertaining to the installation of explosion barriers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Explanation of explosion barriers is consistent with specified requirements. 

    ASSESSMENT CRITERION 2 
    The description and explanation of the principle of explosion barriers is consistent with scientific data contained in specified requirements. 

    ASSESSMENT CRITERION 3 
    Explanation of the different types of explosion barriers is consistent with specified requirements. 

    ASSESSMENT CRITERION 4 
    The importance of installing explosion barriers is explained in terms of consequences to safety. 

    SPECIFIC OUTCOME 2 
    Prepare to install explosion barriers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The examination and use of personal protective equipment is consistent with specified requirements. 

    ASSESSMENT CRITERION 2 
    The importance of examining and correctly using the above is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 3 
    The examination of the tools, equipment and materials is consistent with specified requirements. 

    ASSESSMENT CRITERION 4 
    The importance of examining the above is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 5 
    Permission, where applicable, is obtained to enter the workplace and is consistent with specified requirements. 

    ASSESSMENT CRITERION 6 
    The dangers of entering a workplace without obtaining permission are explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 7 
    The designated workplace is examined and hazards and risks, pertaining to health and safety, are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 8 
    The importance of dealing with hazards and risks is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 9 
    The preparation work is performed in a manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 3 
    Install explosion barriers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The location where explosion barriers are to be installed is identified in a manner consistent with specified requirements. 

    ASSESSMENT CRITERION 2 
    The installation of the explosion barriers is consistent with specified requirements. 

    ASSESSMENT CRITERION 3 
    The immediate vicinity is continuously assessed and hazards and risks pertaining to health and safety are dealt with according to specified requirements. 

    ASSESSMENT CRITERION 4 
    The importance of dealing with hazards and risks is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 5 
    Tools and equipment are used according to design, without injury to self and others. 

    ASSESSMENT CRITERION 6 
    The explosion barriers are installed in a manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 4 
    Perform post-installation activities. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools and equipment are cleaned in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    The workplace is cleaned to comply with specified good-housekeeping requirements. 

    ASSESSMENT CRITERION 3 
    Defective tools and equipment are dealt with in a manner consistent with specified requirements. 

    ASSESSMENT CRITERION 4 
    The importance of dealing with the above is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 5 
    The feedback report complies with specified requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Assessment of learner achievements takes place at providers accredited by a relevant ETQA (RSA, 1998b) for the provision of programs that result in the outcomes specified for this unit standard. Anyone assessing a learner against this unit standard must be registered as an assessor with a relevant ETQA. Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider with a relevant ETQA. The relevant ETQA according to the moderation guidelines and the agreed ETQA procedures will oversee moderation of assessment and is responsible for moderation of learner achievements of learners who meet the requirements of this unit standard. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Learners are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the learner's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard.

    Credited learners understand and can explain:
  • Legal and site-specific requirements
  • What explosion barriers are
  • The principle and different types of explosion barriers
  • The importance of installing explosion barriers
  • The examination and use of personal protective in this regard
  • The examination of the tools, equipment and materials and the importance of examining the above
  • Why permission, where applicable, is obtained to enter the workplace
  • The dangers of entering a workplace without obtaining permission
  • How the designated workplace is examined and hazards and risks, pertaining to health and safety, are dealt with
  • The importance of dealing with hazards and risks
  • How the location where explosion barriers are to be installed is identified
  • The installation of the explosion barriers
  • Why the immediate vicinity is continuously assessed and hazards and risks pertaining to health and safety are dealt with
  • Why tools and equipment are cleaned in accordance with specified requirements
  • Why the workplace is cleaned to comply with specified good-housekeeping requirements.
  • That defective tools and equipment are dealt with in a manner consistent with specified requirements.
  • The feedback report 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. Note: The ability of the learner to identify problems in terms of installing explosion barriers and making recommendations in this regard indicates that he/she can solve problems. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team/group/organisation/community. Note: The ability and willingness of the learner to accept, interpret and delegate work instructions correctly, if and when required, in an appropriate manner indicates that he/she can work effectively as a team member in the bigger organisational structure. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively. Note: The identification of the correct instruments and procedure will indicate that the learner can organise and manage activities in his/her working environment. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, organise and evaluate information. Note: The ability of the learner to collect information on explosion barriers will indicate proficiency in collecting, organising and evaluating information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematics and language skills in the modes of oral and written presentations. Note: The ability of the learner to communicate problems concerning explosion barriers will indicate his/her effectiveness to communicate information. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically (showing responsibility towards the environment and health of others). Note: The ability of the learner to select the appropriate equipment and procedure indicates that he/she is able to use science and technology. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems. Note: The ability of the learner to see the importance of his or her role in installing explosion barriers and their role in making the workplace safer for everybody indicates understanding in this regard. 

    UNIT STANDARD ASSESSOR CRITERIA 
    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the learner competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the learner is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the learner can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal requirements:
  • OHS Act and Regulations 85 / 1993
  • Mine Health and Safety Act and Regulations 29/1996
  • Guideline for mandatory Codes of Practice

    Site-specific requirements:
  • Managerial instructions
  • Codes of Practice
  • Company Standards
  • Standard Task Procedures
  • Health Management Programme
  • Risk Assessment Documentation
  • Working Guides
  • Manufacturers' specifications 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48804   National Certificate: Occupational Safety, Hygiene and Environment  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-11-26  Was HW SETA until Last Date for Achievement 
    Elective  64909   National Certificate: Small Scale Mining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 
    Elective  79806   National Certificate: Occupational Hygiene and Safety  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. MINTEK 
    2. MODIKWA MINING PERSONNEL SERVICES PTY L TD 
    3. SIYANDA BAKGATLA PLATINUM MINE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.