SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate knowledge and understanding of the relevant terminology used in mining - range of underground coal, surface, underground hard rock 
SAQA US ID UNIT STANDARD TITLE
115602  Demonstrate knowledge and understanding of the relevant terminology used in mining - range of underground coal, surface, underground hard rock 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Registered" 
2004-08-11  2007-08-11  SAQA 0655/04 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2008-08-11   2011-08-11  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
252594  Demonstrate an understanding of the relevant terminology used in mining-range of underground coal, surface, underground hard rock  Level 1  NQF Level 01   

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are required to demonstrate a basic knowledge of applicable terminology pertaining to mining.
People credited with this unit standard are able to
  • Demonstrate knowledge of basic terminology used in underground coal;
  • Demonstrate knowledge of basic terminology used in surface mining; and
  • Demonstrate knowledge of basic terminology used in underground hard rock.

    The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and contribute to the upliftment and economic growth of the mining and minerals sector. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit calculation is based on the assumption that learners are already competent in terms of the following outcomes or areas of learning when starting to learn towards this unit standard:
  • ABET Level 3 - fundamentals
  • Other equivalent qualifications 

  • UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of basic terminology used in underground coal. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Basic mining terminology is explained in terms underground coal mining. 
    ASSESSMENT CRITERION RANGE 
  • Air crossing
  • Appointed
  • Barricade
  • Roofbolt
  • Brattice
  • Brow
  • Centre line
  • Competent
  • Exemption
  • Cycle
  • Flameproof
  • Hazardous
  • In-bye
  • Misfire
  • Noxious
  • Report
  • Ribside
  • Slip
  • Two free faces
  • Velocity
  • Ventilation
  • Explosives
  • Beginning of shift
  • End of shift
  • Strata
     

  • SPECIFIC OUTCOME 2 
    Demonstrate knowledge of basic terminology used in surface mining. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Basic mining terminology is explained in terms surface mining. 
    ASSESSMENT CRITERION RANGE 
  • Berm
  • Appointed
  • Barricade
  • High wall
  • Low wall
  • Overburden
  • Interburden (Parting)
  • Competent
  • Exemption
  • Cycle
  • Spoils
  • Hazardous
  • Overhang
  • Misfire
  • Noxious
  • Report
  • Explosives
  • Beginning of shift
  • End of shift
  • Slip
  • < Haul road
  • Strata
     

  • SPECIFIC OUTCOME 3 
    Demonstrate knowledge of basic terminology used in hard rock mining. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Basic mining terminology is explained in terms underground hard rock mining. 
    ASSESSMENT CRITERION RANGE 
  • Vertical shaft
  • Incline shaft
  • Main shaft
  • Sub shaft
  • Haulage
  • Cross cut
  • Return air way
  • Raise
  • Winze
  • Box hole
  • Drive
  • Stope
  • Strike Gully
  • Stoping width
  • Sweeping
  • Vamping
  • Salvage
  • Shaft station
  • Cubby
  • Ventilation door
  • Fire door
  • Emergency escape route
  • Refuge bay
  • Tracks
  • Rail turnout
  • Jump set
  • Sliding rail
  • Hopper
  • Span of hoppers
  • Support span
  • Dip Strike
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

    2. Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.

    3. Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines and the agreed ETQA procedures. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Candidates are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the candidate's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard.

    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Health and safety knowledge
  • Report writing
  • Legal and site-specific requirements 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note: The ability of the candidate to identify substandard and hazardous conditions, assess and take appropriate action. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.

    Note: The ability and willingness of the candidate to accept and interpret work instructions correctly 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.

    Note: The ability of the candidate to indicate what methods, tools and personal protective equipment are required, and to communicate to fellow workers his/her intentions and the assistance required. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note: The ability of the candidate to reconcile the information from visual and physical examinations and constantly evaluate the changing situation. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and / or language skills in the modes of oral and / or written presentations.

    Note: The appropriate communication with the relevant personnel with regard to the reporting of hazards and substandard conditions will indicate his/her proficiency in effective communication. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.

    Note: The use of science and technology is not relevant for this unit standard. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note: The ability of the candidate to identify and refer anomalous behaviour to a specialist confirms his/her understanding of the fact that a specific observation, inference, action or decision may have a devastating effect. 

    UNIT STANDARD ASSESSOR CRITERIA 
    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent. 

  • UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 252594, which is "Demonstrate an understanding of the relevant terminology used in mining-range of underground coal, surface, underground hard rock", Level 1, 3 credits.

    Terminology

    Specified requirements

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act 29/1996), and Minerals Act and Regulations, 1991 (Act 50/1991)
  • Mandatory Codes of Practice
  • SABS and other Standards
  • Chief Inspector of Mines' Directives

    Site-specific:
  • Hazard Identification and Risk Assessments (HIRA)
  • Occupational Health and Safety Risk Management Programme
  • Managerial Instructions
  • Mine Standard Procedures
  • List of Recorded OH&S Risks
  • Working Guides
  • Equipment and Materials Specifications

    Unit standard justification

    Level
    Attribute-Level-Justification
    Skills-1-Limited in range.
    Procedures-1-Repetitive and familiar.
    Context-1-Closely defined.
    Knowledge-1-Narrow-ranging.
    Information processing-1-Recall.
    Problem Solving-1-Known solutions to familiar problems.
    Orientation of activities-1-Closely follows instructions.
    Application of responsibility-1-Candidate's output is quality control.
    Orientation of scope of responsibility-1-Some responsibility towards quantity and quality, i.e. responsible for quantity and quality of items but not the overall output. Sometimes responsible for guidance of others.
    Average level: = 1.0
    Actual level assigned: = 1


    Credits
    Total hours required by the learner to achieve the required outcome:
    Activity-Hours
    Classroom Teaching-30
    On-The-Job Training-0
    Mentoring required-0
    Other (Specify)-0
    Total-30
    Credits achieved: = 30 / 10 = 3.0
    Credits assigned: = 3 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  58267   General Education and Training Certificate: Mining and Minerals Processes  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.