SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Determine the integrated radon gas dose 
SAQA US ID UNIT STANDARD TITLE
120358  Determine the integrated radon gas dose 
ORIGINATOR
SGB Occupational Health and Safety 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 09 - Health Sciences and Social Services Preventive Health 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular-Fundamental  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for persons who have the responsibility to determine the integrated radon gas dose using alpha track etch devices. Persons credited with this can:
  • Demonstrate knowledge of the specified requirements pertaining to the determination of the integrated radon dose.
  • Plan to determine the integrated radon dose.
  • Determine the integrated radon dose.
  • Interpret the results and report thereon. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are competent in Communication and Mathematical Literacy at NQF level 4 or equivalent. 

    UNIT STANDARD RANGE 
    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal requirements:

    Include and are contained in one or more, but not limited to the following documents:
  • OHS Act and Regulations 85/1993
  • Mine Health and Safety Act and Regulations 29/1996
  • Guideline for mandatory Codes of Practice

    Site-specific requirements:

    Specified requirements include site-specific requirements and are contained in one or more of the following documents:
  • Managerial instructions
  • Codes of Practice
  • Company Standards
  • Standard Task Procedures
  • Health Management Program
  • Risk Assessment Documentation
  • Working Guides
  • Manufacturers' specifications 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of the specified requirements pertaining to the determination of the integrated radon dose. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The allowable limits of the radon dose are explained and are consistent with specified requirements. 

    ASSESSMENT CRITERION 2 
    The route of entry and the effects that radon progeny have on the health of persons is explained and is consistent with specified requirements. 

    ASSESSMENT CRITERION 3 
    The importance of conducting radon measurements to ensure a healthy environment is explained and is consistent with specified requirements. 

    ASSESSMENT CRITERION 4 
    The principle of determining radon dose by using alpha track etch devices is explained and is consistent with specified requirements. 

    ASSESSMENT CRITERION 5 
    The sources of radon in air are explained and are consistent with specified requirements. 

    ASSESSMENT CRITERION 6 
    The monitoring program and the information relevant to the monitoring of radon is explained and is consistent with specified requirements. 

    SPECIFIC OUTCOME 2 
    Plan to determine the integrated radon dose. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The required personal protective equipment is obtained, checked for functionality and used in accordance with its design and specified requirements. 

    ASSESSMENT CRITERION 2 
    The importance of examining, using and storing the personal protective equipment is explained in terms of the consequences to health, safety and productivity. 

    ASSESSMENT CRITERION 3 
    Permission to enter the working place is obtained according to specified requirements. 

    ASSESSMENT CRITERION 4 
    The consequences of entering a workplace without obtaining permission are explained in terms of health and safety. 

    ASSESSMENT CRITERION 5 
    The working place is examined and hazards and risks pertaining to health and safety are dealt with according to specified requirements. 

    ASSESSMENT CRITERION 6 
    The importance of examining and dealing with hazards and risks are explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 7 
    The sampling points are selected according to specified requirements. 

    ASSESSMENT CRITERION 8 
    The importance of selecting sampling points as specified is explained in terms of health. 

    ASSESSMENT CRITERION 9 
    The information relevant to personal monitoring, locations and monitoring periods is obtained according to specified requirements. 

    ASSESSMENT CRITERION 10 
    The reasons for radon sampling are explained to the wearer of the equipment in terms of the consequences to health. 

    ASSESSMENT CRITERION 11 
    The importance that the wearer understands the reasons for radon sampling is explained in terms of the consequences to the management of the radiation protection program. 

    ASSESSMENT CRITERION 12 
    The issuing arrangements are according to specified requirements and must include the procurement of track etch devices and the obtaining of personal data. 

    ASSESSMENT CRITERION 13 
    The importance of complying with the issuing arrangements is explained in terms of the consequences to the management of the radiation protection programme. 

    ASSESSMENT CRITERION 14 
    Preparatory work is performed in a manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 3 
    Determine the integrated radon dose. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The issuing process for track etch devices is according to specified requirements. 

    ASSESSMENT CRITERION 2 
    The placement and securing of equipment at selected locations for area monitoring is according to specified requirements. 

    ASSESSMENT CRITERION 3 
    The monitoring equipment is retrieved and dealt with according to specified requirements. 

    ASSESSMENT CRITERION 4 
    The importance of complying with the above is explained in terms of the consequences to the management of the radiation protection programme. 

    ASSESSMENT CRITERION 5 
    The relevant data are recorded according to specified requirements. 

    ASSESSMENT CRITERION 6 
    The importance of recording the data is explained in terms of the consequences to the management of the radiation protection programme. 

    ASSESSMENT CRITERION 7 
    The monitoring is performed in manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 4 
    Interpret the results and report thereon. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The results of the analyses are obtained from the supplier and the radon dose is determined according to specified requirements. 

    ASSESSMENT CRITERION 2 
    Reports are complete, accurate, in the required format, and submitted to designated personnel on time. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA or an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited, as a provider, through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Health and safety knowledge
  • Report writing
  • Legal and site-specific requirements 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Solve problems related to the identification and the recording of anomalous conditions and deviations. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team/group/organisation/community by accepting, interpreting and delegating instructions correctly, if and when required, in a context-appropriate manner. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively by meeting specified requirements, recording test results in specified formats, and recommending appropriate action where necessary. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, organise and critically evaluate information to correct for conditions, environmental factors, and limitations that can influence readings, interpret information obtained, and recommend appropriate action. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematics and language skills in the modes of oral and written presentations to record and report test results. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recommending appropriate actions based on the evaluation of test results and reporting results to relevant designated persons, confirming that a specific observation, inference, action or decision can have an interrelated effect. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  79807   Further Education and Training Certificate: Occupational Hygiene and Safety  Level 4  NQF Level 04  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  57631   National Certificate: Radiation Protection  Level 5  Level TBA: Pre-2009 was L5  Reregistered  2023-06-30  EWSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. DIGGERS TRAINING AND DEVELOPMENT SERVICES 
    2. MINES RESCUE SERVICES PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.