SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Develop and fabricate from complex drawings 
SAQA US ID UNIT STANDARD TITLE
12252  Develop and fabricate from complex drawings 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  28 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Laying out and marking off templates, structural sections and complex surface developments, and forming and shaping flat plate, sheet, solid bar, pipe and section materials as used in the fabrication industry.

The skills, values and knowledge reflected in this unit standard are required by people in the field of engineering fabrication, which includes boilermaking, sheetmetal working, welding and vehicle body building. The learning outcomes in this unit standard contribute to the exit level outcomes required for the National Certificate in Fabrication (Light / Heavy) (NQF level 4) and related qualifications. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for drawing, marking off, forming and shaping in the engineering fabrication field.

The credits allocated to this unit standard assume that a learner has already learned to lay out and mark off regular and irregular shapes for fabrication, and to form and shape sheet, plate, pipe and structural sections using power operated machines. 

UNIT STANDARD RANGE 
A general guide to the scope, context conditions, and level at which I am expected to perform.

The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes. Work is performed autonomously.

Laying out and marking off at this level should include composite problems containing one type of pattern development, triangulation from square, rectangle, circle and ellipse or parts thereof at inclined planes, and the intersection of two objects, the lofting and marking out of plate, structural details including column bases, truss apex, knee connections, truss feet and flanges.

Forming and shaping should include a range of operations. Forming may include both hot and cold techniques and use standard and non-standard hand and power operated machinery. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Prepare for laying out, marking off and forming and shaping of materials. 
OUTCOME NOTES 
  • Interpret job instructions and determine sequence of operations
  • Check that equipment, tools and materials required are at the workstation
  • Prepare equipment and tools for operation, including routine maintenance and preoperational checks
  • Select materials
  • Perform pattern calculations
  • Determine lines of intersection
  • Identify and note appropriate level marks
  • Identify codes and standards in relation to dimensional accuracy
  • Analyse material characteristics
  • Perform calculations of force and leverage
  • Identify hazards and take preventative action 
  • OUTCOME RANGE 
  • Equipment for development includes measuring and marking out equipment
  • Equipment for fabricating includes pyramid bend rolls, pinch bend rolls, folding brake bending machines, bending brake machines
  • Materials include low carbon and alloy steels, stainless steels, aluminium alloys and copper alloys
  • Section shapes include sheet materials, plate and structural sections. Material thickness typically ranges from 0.4 to 100mm 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 2 
    Mark out templates and patterns. 
    OUTCOME NOTES 
  • Make templates and patterns using X and Y co-ordinates
  • Mark out heavy wall tube connections
  • Produce templates for structural connections
  • Establish and transfer datum points to materials 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 3 
    Lay out and mark off structural sections. 
    OUTCOME NOTES 
  • Use structural section sketches to communicate job requirements to others in team
  • Lay out structural connections
  • Lay out and mark off pipe work
  • Mark off section material 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 4 
    Mark out surface developments. 
    OUTCOME NOTES 
  • Carry out pattern developments
  • Carry out surface developments using neutral surface calculations
  • Complete surface developments with allowances for joint preparation
  • Generate right, oblique and transition patterns
  • Inspect and measure surface development, templates and structural components for compliance 
  • OUTCOME RANGE 
    Neutral surface includes inside and outside developments 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 5 
    Form and shape materials. 
    OUTCOME NOTES 
  • Set machines
  • Carry out form and shape operations
  • Dispose of waste material
  • Store reusable materials
  • Inspect and measure fabricated items for compliance to job specifications 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 6 
    Identify and report non-conformances that cannot be rectified. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 7 
    Record information on work done and provide feedback to appropriate personnel. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 

    SPECIFIC OUTCOME 8 
    Apply safe working practices and discuss issues related to safety of self, fellow workers, machines. 
    OUTCOME NOTES 
    Apply safe working practices and discuss issues related to safety of self, fellow workers, machines, equipment, materials and the environment. 
    OUTCOME RANGE 
    Safe working practices include use of appropriate personal protective equipment and safe handling of equipment and materials 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Fabricated component is produced to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Job instructions are correctly interpreted and complied with
    2. Correct equipment and tools are selected
    3. Equipment is set up to work safely and without damage to work piece or equipment
    4. Correct materials are identified as per job requirements
    5. Safe working practices are adhered to
    6. Pattern calculations comply to job specifications
    7. Lines of intersection are determined in accordance with job specifications
    8. Appropriate level marks are identified and noted
    9. Potential hazards are identified and preventative action taken
    10. Codes and standards are adhered to
    11. Templates and patterns suit job requirements
    12. Heavy wall tube connections are marked out
    13. Datum points are established and transferred to material
    14. Machine allowances are correctly determined
    15. Laying out and marking off is done according to job / drawing specifications
    16. Pattern and surface developments comply with job specifications
    17. Joint allowances are made in accordance with job specifications
    18. Surface developments, templates and structural components are inspected and measured for copliance to job specifications
    19. Material characteristics are considered and analysed
    20. Materials are selected to reduce waste and increase productivity
    21. Non-conformances are rectified or reported
    22. Calculations of force and leverage comply to job specifications
    23. Correct forming and shaping machines are selected
    24. Machines are set correctly
    25. Materials are formed and shaped to job specifications
    26. Recording requirements are carried out
    27. A clean and tidy work environment is maintained

    Understanding confirmed :

    Explain and discuss
    1. Equipment, tools and functions
    2. Material characteristics
    3. Marking off and laying out procedures
    4. Methods of pattern development
    5. Structural details
    6. Codes and standards
    7. Forming and shaping procedures
    8. Hazards
    9. Safety procedures
    10. Quality checks
    11. Reporting and documentation procedures 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA ETQA, which has the jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were produced outside of the workplace.

    I can be assessed against this unit standard to obtain credits, or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Equipment and tools

    Attributes, descriptions, characteristics & properties:
  • Materials, their properties and characteristics
  • Hazards
  • Structural details
  • Methods of pattern developments
  • Structural sections

    Purpose of:
  • Laying out and marking off operations
  • Accurate calculations and measurements
  • Purpose of datum point, lines of intersection, level marks
  • Allowances for joint preparation
  • Correct material identification
  • Forming and shaping operations
  • Heat treatment or surface finishing
  • Quality checks

    Processes, events, causes and effects, implications:
  • Importance of codes and standards and their effects on dimensional accuracy
  • Implications of incorrect calculations
  • Implications of inaccurate measurement
  • Implications of inappropriate selection of material
  • The importance of calculating the force required to bend materials
  • Implications of incorrect shaping and forming techniques relative to material types
  • Implications of not identifying hazards
  • Consequences of non-conformances


  • Procedures and techniques:
  • Worksite procedures
  • Layout techniques
  • Pattern development techniques
  • Preparation procedures
  • Maintenance procedures
  • Safe operating procedures for machinery
  • Identification of materials
  • Forming and shaping techniques
  • Procedures for setting up forming and shaping machines
  • Heat treatment and surface finishing procedures
  • Safe handling of material
  • Safety procedures
  • Quality procedures
  • Recording and or reporting procedures

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation and standards


  • Theory: rules, principles, laws:
  • Principles of tolerances and allowances
  • Applicable standards for marking off structures
  • Welding and machine symbols
  • Formulae for calculating force and leverage
  • Principles of operation of forming machines

    Relationships, systems:
  • Relationship of codes and standards and their effects on dimensional accuracy
  • Relationship between dimensions and shapes of materials and their implications for further processing
  • Relationship between material characteristics and the formability of the material 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise inaccuracies in laying out and marking off and rectify them
  • Identification and prevention of hazards 

  • UNIT STANDARD CCFO WORKING 
    Work together with others:
  • Co-ordinating the efforts of the workgroup
  • Correct instructions to assistants 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Plan sequence of operations based on job instructions and set up equipment appropriately 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Examine workpiece for non-conformances 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Communicate job requirements to others by means of structural section sketches
  • Record and report outcome of work to appropriate personnel 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Calculate dimensions, determine shapes, measure accurately
  • Understanding of material properties
  • Use formulae to calculate force required to bend metal 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Explain the effect of the dimensions and shape of components on further processing, assembly or joining of a formed and shaped component 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  58721   Further Education and Training Certificate: Engineering Fabrication  Level 4  NQF Level 04  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Core  22871   National Certificate: Engineering Fabrication (light or heavy)  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2007-08-16  MERSETA 
    Elective  49646   Further Education and Training Certificate: Manufacturing Technical Maintenance  Level 4  NQF Level 04  Reregistered  2023-06-30  AgriSETA 
    Elective  59769   Further Education and Training Certificate: Mechanical Engineering: Pipe-Fitting  Level 4  NQF Level 04  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  50560   Further Education and Training Certificate: Small Craft Construction  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered" 
    2009-08-31  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Africa International Training Facilities T/A AITF (BREDELL) (TP) 
    2. Belique Training Centre cc (ALBERTON) (TP) 
    3. BELMET TRAINING CENTRE T/A BELMET MARINE (PTY) LTD (Bellville)(TP) 
    4. Bevline Mechanical Projects (Pty) Ltd (PROSPECTON) (TP) 
    5. Blue Horison Properties 53 (Pty) Ltd T/A Durnacol Skills Innovation Hu 
    6. Coastal Kzn F.E.T. College - Swinton Road Campus 
    7. Eastcape Training Centre 
    8. False Bay Public FET College - Westlake Campus 
    9. Gijima AST Holdings (Pty) Ltd T/A Fundi Training Centre (BENONI) (TP) 
    10. Jericho Safety Consultants (Pty) Ltd (TP) 
    11. Lapace Training Centre (SPRINGS) (TP) 
    12. Majuba FET College - Newcastle Technology Centre 
    13. Mopani South East FET College - Phalaborwa Campus 
    14. Northlink College - Bellville Campus 
    15. S & S Training & Construction (SPRINGS) (TP) 
    16. Sedibeng Artisan Skills Training Centre (VEREENIGING) (TP) 
    17. SEDIBENG TRAINING CENTRE 
    18. SSS Sheet Metal Work cc T/A Sheetech SA (DURBAN) (TP) 
    19. Steinmuller Africa (Pty) Ltd T/A Steinmuller Technical Training Academ 
    20. THE SAJ COMPETENCY TRAINING INSTITUTE CC 
    21. Umfolozi FET College - Central Office 
    22. West Coast Public FET College - Vredenburg Campus 
    23. Wilbat Projects 148 (Pty) Ltd (ISIPINGO) (TP) 
    24. World Focus 382 cc T/A Richards Bay Technical Training & Assessment Centre (ZCBF) (RICHARDS BAY) (TP) 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.