SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Sling loads 
SAQA US ID UNIT STANDARD TITLE
12481  Sling loads 
ORIGINATOR ORIGINATING PROVIDER
SGB Manufacturing and Assembly Processes   
QUALITY ASSURING BODY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2012-07-01  2015-06-30  SAQA 0695/12 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2016-06-30   2019-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners in the field of engineering require the skills, values and knowledge reflected in this unit standard.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the National Certificate in Mechanical Engineering Fitting (NQF level 2) and related qualifications.

Qualifying learners can sling loads safely before allowing load-moving equipment to remove / move the load. They will understand the importance of applying safe slinging techniques and how it is achieved. This will include a basic knowledge of weight determining, determining what load slinging equipment is required, lashing the load, attaching the load to the selected lifting equipment and signalling the lifting equipment operator. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as the start of a progression. It is one of a series of unit standards for maintaining and caring for equipment in the engineering skills area. 

UNIT STANDARD RANGE 
The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.

All work is performed under supervision and according to worksite and manufacturer specifications and occupational safety, health and environmental legislation. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Plan and prepare for load slinging activity. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Load weight and slinging methodology is determined. 
ASSESSMENT CRITERION NOTES 
Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    1. Read and interpret task instruction and worksite procedure. 

    ASSESSMENT CRITERION 5 
    2. Determine the weight of the load and the appropriate slinging methodology accurately. 

    SPECIFIC OUTCOME 2 
    Prepare site and equipment for load slinging. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Load weight and slinging methodology is determined. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    1. Clear site of personnel. 

    ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    2. Identify and select equipment against the load to be moved. 

    ASSESSMENT CRITERION 5 
    3. Conduct pre-use checks on all equipment to be used. 
    ASSESSMENT CRITERION RANGE 
    Equipment includes wire rope, chain and nylon slings, web belts, turn buckles, shackles and eyebolts.
     

    SPECIFIC OUTCOME 3 
    Sling load. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Attach slinging equipment to loads with or without lifting lugs. 

    ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    2. Balance the load and check working clearances timeously and safely. 

    ASSESSMENT CRITERION 5 
    3. Signal the lifting equipment operator. 
    ASSESSMENT CRITERION RANGE 
    Signals include hand, whistle, flags and electronic types.
     

    ASSESSMENT CRITERION 6 
    4. Conduct post-slinging activities. 
    ASSESSMENT CRITERION RANGE 
  • Post slinging activities include cleaning up, processing documentation and reporting load-slinging activities to responsible persons.
  • Documentation includes inspection registers.
     

  • SPECIFIC OUTCOME 4 
    Signal the lifting equipment operator. 
    OUTCOME RANGE 
    Signals include hand, whistle, flags and electronic types. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Load weight and slinging methodology is determined. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 5 
    Conduct post-slinging activities. 
    OUTCOME RANGE 
  • Post slinging activities include cleaning up, processing documentation and reporting load-slinging activities to responsible persons.
  • Documentation includes inspection registers. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Load weight and slinging methodology is determined. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 6 
    Care for and store load slinging equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Ensure equipment is not damaged. 

    ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    2. Problems are timeously communicated to the appropriate role players. 

    ASSESSMENT CRITERION 5 
    3. Correct storage techniques are adhered to. 

    SPECIFIC OUTCOME 7 
    Report on slinging equipment condition. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Equipment operational inspections conform to manufacturer specifications. 

    ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed.

    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 4 
    2. Documents and reports regarding operations and inspections are clear, accurate and complete. 

    ASSESSMENT CRITERION 5 
    3. Completion of load moving is reported to appropriate personnel. 

    ASSESSMENT CRITERION 6 
    4. Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERION 7 
    5. Incidents and problems related to load slinging. 
    ASSESSMENT CRITERION RANGE 
    Safety includes adhering to safe working loads.
     

    SPECIFIC OUTCOME 8 
    Discuss and explain incidents and problems related to load slinging. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Load weight and slinging methodology is determined. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 9 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 
    OUTCOME RANGE 
    Safety includes adhering to safe working loads. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Load weight and slinging methodology is determined. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 2 
    2. Loads are safely slung. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • ASSESSMENT CRITERION 3 
    3. Documents and reports are completed. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
  • Load weight is accurately determined
  • Weight calculation and anticipated slinging methodology is accurately explained
  • Appropriate slinging equipment is selected and cared for
  • Equipment operational inspections conform to manufacturer specifications
  • Slinging methodology is appropriately applied
  • Load is timeously and safely slung and balanced
  • Associated slinging signals are used
  • Equipment is not damaged, no injury occurs to personnel
  • Problems are timeously communicated with the appropriate role-players
  • No delays are caused as a result of poor planning or slinging loads
  • Slinging is carried out in a safe manner in accordance with procedures and applicable legislation
  • Documents and reports are clear, accurate and complete
  • Completion of load moving is reported to appropriate personnel
  • Applicable safety, health and environmental procedures are adhered to

    Understanding confirmed:

    Respond to 'what if' and 'why' questions related to
  • The basic principles of slinging
  • Use and caring of slinging equipment.
  • The reasons for proper care and storage techniques.
  • The fundamentals of determining the load weight, attaching slings and balancing loads
  • The implications of not following safe working procedures

    Explain the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The assessment will be governed by the policies and guidelines of the relevant Education and Training Quality Assurance Body who has jurisdiction over this field of learning. The assessor will be accredited and have a technical qualification in this learning area.

    The learner can be assessed in the language of his/her choice although s/he has to report incidents or conditions to someone else. The learner will be assessed on his/her ability to report in the language commonly used in his/her working environment.

    The learner will be assessed in the workplace but s/he can submit documents, projects, test results and assignments that were not produced in the workplace.

    The learner can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names & functions of:
  • Slinging equipment.
  • Task instruction.
  • Typical slinging equipment non-conformances.

    2. Attributes, descriptions, characteristics & properties:
  • Of non-conformances / faults on slinging equipment.
  • Of slinging equipment.

    3. Sensory cues:
  • Sensory cues (what I see, hear, smell, feel) utilised for identifying problems during load slinging activities.

    4. Purpose of:
  • Pre-use inspections.
  • Slinging equipment.
  • Safety checks.
  • Signing off the task instruction.
  • Reporting non-conformances, incidents and problems.

    5. Processes, events, causes and effects, implications:
  • Implications of non-conformance.
  • Causes and responses to common problems.
  • Implications and consequences of situations such as e.g. poor quality, damaged or faulty equipment.

    6. Procedures and techniques:
  • Posture during slinging equipment usage.
  • Accurate load weight determining.
  • Safe slinging.
  • Using slinging equipment in adverse conditions.
  • Signalling load moving equipment operator.
  • Slinging equipment caring for and storing procedure.
  • Recording and reporting procedures.

    7. Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation.
  • Applicable company policies and procedures.

    8. Theory: rules, principles, laws:
  • Determining load weight.
  • Safe slinging.
  • Load balancing.
  • Selecting the appropriate slinging equipment for any given load.

    9. Relationships, systems:
  • Relationship between the load, the shape and size of the load and the selected slinging equipment and methodology. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems.
  • Related to the slinging of loads. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team.
  • Interact with colleagues and team members in order to acquire the required slinging equipment. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage my activities and myself.
  • Apply the correct procedures and techniques for slinging the load.
  • Manage resources and my time. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.
  • Interpret information off job instructions to sling correct loads.
  • Make decisions based on that information. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively.
  • Report condition of slinging equipment. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems.
  • Understand and explain the purpose of load slinging in the maintenance process.
  • Justify my actions as appropriate. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE QUALITY ASSURING BODY
    Core  49402   National Certificate in Steel Tube and Pipe Manufacturing (Seamless Hot-Finished OR Welded OR Cold-Formed)  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  MERSETA 
    Core  58269   National Certificate: Electro-Mechanics  Level 2  NQF Level 02  Reregistered  2015-06-30  As per Learning Programmes recorded against this Qual 
    Core  22869   National Certificate: Engineering Fabrication  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2007-08-16  MERSETA 
    Core  58722   National Certificate: Engineering Fabrication  Level 2  NQF Level 02  Reregistered  2015-06-30  As per Learning Programmes recorded against this Qual 
    Core  66512   National Certificate: Foundry Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2013-11-07  MERSETA 
    Core  23273   National Certificate: Mechanical Engineering: Fitting  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  23254   National Certificate: Mechanical Engineering: Fitting and Machining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  60169   National Certificate: Water and Wastewater Reticulation Services  Level 2  NQF Level 02  Reregistered  2015-06-30  EWSETA 
    Elective  65809   National Certificate: Automotive Manufacturing and Assembly  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  48695   National Certificate: Measurement, Control and Instrumentation  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2009-04-08  Was EWSETA until Last Date for Achievement 
    Elective  74530   National Certificate: Measurement, Control and Instrumentation  Level 2  NQF Level 02  Reregistered  2015-06-30  As per Learning Programmes recorded against this Qual 
    Elective  59689   National Certificate: Mechanical Engineering  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2013-11-07  As per Learning Programmes recorded against this Qual 
    Elective  58718   National Certificate: Metals Processing  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  36154   National Certificate: Polymer Composite Fabrication  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  58781   National Certificate: Production Technology  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  50542   National Certificate: Small Craft Construction  Level 2  NQF Level 02  Passed the End Date -
    Status was "Registered" 
    2009-08-31  Was MERSETA until Last Date for Achievement 
    Elective  24215   National Certificate: Thermoplastic Fabrication  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  59017   National Certificate: Tissue Conversion  Level 2  NQF Level 02  Reregistered  2015-06-30  FPMSETA 
    Elective  61809   National Certificate: Tyre Repair and Maintenance  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  77003   National Certificate: Yacht and Boat Building  Level 2  NQF Level 02  Reregistered  2015-06-30  MERSETA 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Reregistered  2015-06-30  As per Learning Programmes recorded against this Qual 
    Elective  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Reregistered  2015-06-30  TETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Quality Assuring Bodies have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Quality Assuring Body should be notified if a record appears to be missing from here.
     
    1. Africa International Training Facilities T/A AITF (BREDELL) (TP) 
    2. Aldabri 106 (PTY) Ltd 
    3. ALL CONNECTIONS 
    4. All-Rite Services cc (AUSTERVILLE) (TP) 
    5. ArcelorMittal South Africa Ltd (VANDERBIJLPARK) (TP) 
    6. August General Servicing SA (Pty) Ltd (ALRODE) (TP) 
    7. AURECON TRAINING ACADEMY 
    8. Barloworld South Africa (Pty) Ltd T/A Barloworld-Equipment (ISANDO) (T 
    9. Beekman Super Canopies (STIKLAND) (TP) 
    10. Belique Training Centre cc (ALBERTON) (TP) 
    11. Bevline Mechanical Projects (Pty) Ltd (PROSPECTON) (TP) 
    12. Blue Horison Properties 53 (Pty) Ltd T/A Durnacol Skills Innovation Hu 
    13. BMW SA (Pty) Ltd (ROSSLYN) (TP) 
    14. Bridgestone South Africa (Pty) Ltd - Isando Branch (ISANDO) (TP) 
    15. Bridgestone South Africa (Pty) Ltd - PE Plant (PORT ELIZABETH) (TP) 
    16. Coastal Kzn F.E.T. College - Central Office 
    17. Coastal Kzn F.E.T. College - Swinton Road Campus 
    18. Coastal Kzn F.E.T. College - Umbumbulu Campus 
    19. College of Production Technology 
    20. COLLIERY TRAINING COLLEGE 
    21. COLLIERY TRAINING COLLEGE (Witbank)(TP) 
    22. Community Water Supply & Sanitation Unit 
    23. Customised Training Specialists Trust T/A CTS (PINETOWN) (TP) 
    24. E & A Consulting Services T/A Isizwe Mechanical & Welding Training Cen 
    25. Eastcape Midlands Public FET College - Charles Good Year Campus 
    26. Eastcape Midlands Public FET College - Uitenhage (High Street)Campus 
    27. Eastcape Training Centre 
    28. ERGO WATER WORKS CC 
    29. Eskom Academy of Learning - Artisan Faculty 
    30. Eskom Arnot Power Station - Maintenance Training 
    31. Eskom Matimba Power Station - Maintenance 
    32. ESKOM MATLA POWER STATION - MAINTENANCE TRAINING 
    33. False Bay Public FET College - Westlake Campus 
    34. Gert Sibande Public FET College - Standerton Campus 
    35. Gijima AST Holdings (Pty) Ltd T/A Fundi Training Centre (BENONI) (TP) 
    36. Gijima AST Holdings (Pty) Ltd T/A Industrial Skills Development (Tlhah 
    37. Gijima Holdings (Pty) Ltd T/A Industrial Skills Development - Middelb 
    38. Hansing Engineering (Pty) Ltd (SALDANHA) (TP) 
    39. HV Consultants (Pty) Ltd (PORT ELIZABETH) (TP) 
    40. HV Maintenance Services (PORT ELIZABETH) (TP) 
    41. Ikhaya Fundisa Technical Academy 
    42. IN TOUCH COMMUNITY DEVELOPMENT 
    43. Inncor Training & Development (Pty) Ltd (VEREENIGING) (TP) 
    44. Izizwe Training Centre (Pty) Ltd T/A Simtech Training (NORTHDENE) (TP) 
    45. JESUA CONSULTANTS (Hartenbos) (WA) 
    46. Lapace Training Centre (SPRINGS) (TP) 
    47. LEPELLE NORTHERN WATER 
    48. MacSteel Services Centres SA (WADEVILLE) (TP) 
    49. Majuba FET College - Newcastle Technology Centre 
    50. Majuba FET College - Newcastle Training Centre 
    51. Maritzburg Engineering cc (MKONDENI) (TP) 
    52. Master Artisan Academy 
    53. MCD Training Centre (Pty) Ltd (VEREENIGING) (TP) 
    54. Mercedes Benz South Africa (Pty) Ltd (EAST LONDON) (TP) 
    55. Metal Mining Training Interventions (Pty) Ltd (MIDDELBURG) (TP) 
    56. MMTI 
    57. Mopani South East FET College - Phalaborwa Campus 
    58. MSC Artisan Academy (Pty) Ltd T/A Master Artisan Academy SA (EAST LOND 
    59. Mthetana Trading & Construction T/A Multi Skill Training Centre (DURBA 
    60. MZANSI SKILLS BASE CC (Selby)(TP) 
    61. Nissan SA (Pty) Ltd (ROSSLYN) (DTTC) 
    62. Nissan SA (Pty) Ltd (ROSSLYN) (TP) 
    63. Northlink College - Bellville Campus 
    64. Northlink College - Goodwood Campus 
    65. Northlink College - Wingfield Campus 
    66. Optimum Learning Technologies (Pty) Ltd 
    67. Orbit FET College - Mankwe Campus 
    68. Orbit FET College - Rustenburg Campus 
    69. Pam's Educational Consultancy 
    70. PDNA Academy (Pty) Ltd (JOHANNESBURG) (TP) 
    71. Planet Waves 237 (Pty) Ltd T/A Occupational Learning Centre (OLC) (PRE 
    72. Plastics Federation of South Africa (MAITLAND) (TP) 
    73. Plastics Federation of South Africa (MIDRAND) (TP) 
    74. Plastics Federation of South Africa (WESTMEAD) (TP) 
    75. Polyoak Business School (Pty) Ltd (DIEP RIVER) (TP) 
    76. Production Management Institute of Southern Africa (PMI) 
    77. Professional Driver Solutions T/A PDS Training Centre (PINETOWN) (TP) 
    78. PWI CORPORATE TRAINING (PTY)LTD 
    79. QTE Training & Consulting cc T/A QTE (GERMISTON) (TP) 
    80. S & S Training & Construction (SPRINGS) (TP) 
    81. Scaw Metals Group (Pty) Ltd T/A Scaw Metals (DINWIDDIE) (TP) 
    82. Sedibeng Artisan Skills Training Centre (VEREENIGING) (TP) 
    83. Service Corps T/A Works Training School (ELANDSFONTEIN) (TP) 
    84. Shine The Way 281 cc T/A Industrial Training Centre (NEW GERMANY) (TP) 
    85. Shukela Training Centre 
    86. South Cape Public FET College - George Campus 
    87. SSS Sheet Metal Work cc T/A Sheetech SA (DURBAN) (TP) 
    88. Steinmuller Africa (Pty) Ltd T/A Steinmuller Technical Training Academ 
    89. Sternberg Steel Construction Artisan Training Centre (RUSTENBURG) (TP) 
    90. Tata Steel Skills Training Centre 
    91. Tekmation (Pty) Ltd T/A Tekmation Training Institute (DURBAN) (TP) 
    92. THE NEW RECLAMATION GROUP (PTY) LTD (Prospecton) (TP) 
    93. THE SAJ COMPETENCY TRAINING INSTITUTE CC 
    94. The Skills College for Development & Training cc (PRETORIA) (TP) 
    95. Toyota Academy Toyota SA Motors (Pty) Ltd (ISIPINGO) (TP) 
    96. TRENTYRE (Spartan)(TP) 
    97. Tshwane South Public FET College - Centurion Campus 
    98. Tshwane South Public FET College - Pretoria West Campus 
    99. TUBATSE CHROME (Steelpoort)(TP) 
    100. Umfolozi FET College 
    101. Umfolozi FET College - Central Office 
    102. Umfolozi FET College - Mandeni Campus 
    103. Umfolozi FET College - Richtek Campus for Vocational Education 
    104. Volkswagen of South Africa (Pty) Ltd - Technical Learning Academy (UIT 
    105. Vuselela FET College - Matlosana 
    106. Wavelength T.T.I 
    107. West Coast Public FET College - Vredenburg Campus 
    108. Western Cape Institute of Foundrymen (ATLANTIS) (TP) 
    109. Wheelman S A 
    110. Wilbat Projects 148 (Pty) Ltd (BLUFF) (TP) 
    111. Wilbat Projects 148 (Pty) Ltd (ISIPINGO) (TP) 
    112. World Focus 382 cc T/A Richards Bay Technical Training 
    113. World Focus 382 cc T/A Richards Bay Technical Training & Assessment Ce 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.