SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Set out control point for centre line and edge line marking for road marking 
SAQA US ID UNIT STANDARD TITLE
12908  Set out control point for centre line and edge line marking for road marking 
ORIGINATOR ORIGINATING PROVIDER
SGB Civil Engineering Construction   
QUALITY ASSURING BODY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2012-07-01  2015-06-30  SAQA 0695/12 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2016-06-30   2019-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful for people who work in the construction and maintenance of roads. People credited with this unit standard will be able to demonstrate the ability to set out control point for centre line and edge line marking for road marking. Previously disadvantaged persons who through recognition of prior learning will be able to be accessed against this standard and receive National recognition for their competence. This will enhance their employability and career advancement and contribute to the socio-economic transformation of the country. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
ABET 4 in Literacy and ABET 3 in Numeracy.

Identify and use protective clothing in general construction, implement road side safety procedures, transport personnel, material and equipment using light delivery vehicle, read and interpret construction drawing and specifications. 

UNIT STANDARD RANGE 
Control points for centre and edge line marking. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Identify and procure the types of hand tools and instruments required for the setting out 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Tools and instruments are identified that is suitable for setting out control points. 

SPECIFIC OUTCOME 2 
Identify and procure protective cloting, road signs and traffic control devices, first aid kit. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Protective clothing and first aid kit identified and procured that will comply with the Occupational Health and Safety Act requirements. 

ASSESSMENT CRITERION 2 
2. Road signs and traffic control devices identified and procured that will comply with working safely in a road environment. 

SPECIFIC OUTCOME 3 
Calculate material quantities, procure material and store 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Material quantities calculated. 

ASSESSMENT CRITERION 2 
2. Material procured. 

ASSESSMENT CRITERION 3 
3. Material transported and stored. 

SPECIFIC OUTCOME 4 
Set out control points 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Control points set out according to project specifications. 

SPECIFIC OUTCOME 5 
Execute the work in a cost effective and safe manner 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Program of work is prepared. 

ASSESSMENT CRITERION 2 
2. Records of labor, material and plant used captured on a daily basis. 

ASSESSMENT CRITERION 3 
3. Quality control of work is executed to ensure work complies to project specification. 

ASSESSMENT CRITERION 4 
4. Productivity control is executed to ensure compliance to targets. 

ASSESSMENT CRITERION 5 
5. Deficiencies identified in terms of meeting program. 

ASSESSMENT CRITERION 6 
6. Remedial action recommended to supervisor. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
Assessment of learner achievements takes place at providers accredited by CETA (RSA, 1998b) for the provision of programs that result in the outcomes specified for the Certificate for Construction Contractors. CETA is responsible for moderation of learner achievements of learners who meet the requirements of this qualification. A memorandum of understanding with other ETQA bodies need to be signed when training providers working in other Sectors, requires assessment of learner achievements to take place against this unit standard. 

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
Qualifying learners understands and can explain:
  • The technique of setting out control points for center line and edge line marking.
  • The selection of tools, materials and instruments for the setting out of control points for line marking.
  • The selection and application of protective clothing/safety procedures.
  • The selection and application of road safety measures relevant to the activity.
  • Planning the setting out activity.
  • Quality and productivity control of the setting out activity. 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems.

    Specific Outcome:
  • Identify and procure the types of hand tools and instruments required for the setting out.
  • Identify and procure protective clothing, road signs and traffic control devices, first aid kit.
  • Calculate material quantities, procure material and store.
  • Set out control points.
  • Execute the work in a cost effective and safe manner.

    Assessment Criteria:
  • Correct identification of instruments, tools, protective measures, execute quality and productivity control. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others.

    Specific Outcome:
  • Execute the work in a cost effective and safe manner.

    Assessment Criteria:
  • Control of productivity, quality and safety. 

  • UNIT STANDARD CCFO ORGANISING 
    Manage information.

    Specific Outcome:
  • Identify and procure the types of hand tools and instruments required for the setting out.
  • Identify and procure protective clothing, road signs and traffic control devices, first aid kit.
  • Calculate material quantities, procure material and store.
  • Set out control points.
  • Execute the work in a cost effective and safe manner.

    Assessment Criteria:
  • Correct identification of instruments, tools and protective measures.
  • Material procurement.
  • Prepare program. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively.

    Specific Outcome:
  • Execute the work in a cost effective and safe manner.

    Assessment Criteria:
  • Communicate quality, productivity and safety. 

  • UNIT STANDARD CCFO SCIENCE 
    Demonstrate scientific and technological competence.

    Specific Outcome:
  • Identify and procure the types of hand tools and instruments required for the setting out.
  • Identify and procure protective clothing, road signs and traffic control devices, first aid kit.
  • Calculate material quantities, procure material and store.
  • Set out control points.
  • Execute the work in a cost effective and safe manner.

    Assessment Criteria:
  • Identification of instruments/tools/materials/protective clothing/traffic control measures.
  • Control of productivity. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Employ self management.

    Specific Outcome:
  • Set out control points.

    Assessment Criteria:
  • Set out work.

    Understand contextual world-systems.

    Specific Outcome:
  • Execute the work in a cost effective and safe manner.

    Assessment Criteria:
  • Safety, quality, impact on public. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE QUALITY ASSURING BODY
    Elective  22977   National Certificate: Construction: Roadworks  Level 1  NQF Level 01  Passed the End Date -
    Status was "Registered" 
    2005-12-04  CETA 
    Elective  24133   National Certificate: Construction: Roadworks  Level 2  NQF Level 02  Reregistered  2015-06-30  CETA 
    Elective  24173   National Certificate: Construction: Roadworks  Level 3  NQF Level 03  Reregistered  2015-06-30  CETA 
    Elective  20486   National Certificate: Surveying  Level 4  Level TBA: Pre-2009 was L4  Reregistered  2015-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Quality Assuring Bodies have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Quality Assuring Body should be notified if a record appears to be missing from here.
     
    1. Abc Developers 
    2. Academy for Construction Skills (Pty) Ltd (ACS) 
    3. AGR National Training cc 
    4. Goldfields FET College 
    5. IMBAWULA CIVIL PROJECTS 
    6. LG Project Management 
    7. LSA School of Technology 
    8. Macsen Construction & Projects 
    9. Masima Training Sa Cc 
    10. Qualfurn Furniture Manufacture cc 
    11. S.A.G Training 
    12. Sakhisizwe Development Training 
    13. South African Value Education (Pty) Ltd 
    14. Tovani Traiding 299 
    15. Training Force (Pty) Ltd 
    16. Uthungulu HRD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.