SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Plan drawing layout 
SAQA US ID UNIT STANDARD TITLE
14471  Plan drawing layout 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Physical Planning, Design and Management 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2008-10-20  2009-04-08  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-04-08   2013-04-08  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
263024  Plan and produce two dimensional (2D) Computer Aided Drawings (CAD)  Level 4  NQF Level 04  15   

PURPOSE OF THE UNIT STANDARD 
This unit standard provides a broad introduction to the planning and preparing of drawing layouts. It is the starting point for a learner in this sector. The focus is knowledge, skills, values and attitudes in relation to the learner`s own context and experience of the world of work.


The qualifying learner is capable of:
  • Verifying the interpretation of job requirements
  • Determining the drawing requirements
  • Preparing to produce the drawing
  • Preparing the computer environment for using computer aided drawing software 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • Learners accessing this unit standard will have demonstrated competence in mathematics, engineering science and technical drawing at NQF level 4 or equivalent.
  • Learners accessing this unit standard will have demonstrated competence in computer technology at Level 3 on the NQF or equivalent. 

  • UNIT STANDARD RANGE 
  • Drawing medium will include software packages.
  • Draughting will include general draughting, mechanical draughting, architectural / civil draughting, structural steel detailing, electrical draughting, piping and instrumentation draughting
  • Superfluous information will include unnecessary elaboration, repetitive details, repetitive dimensions, excessive views and unnecessary detail 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Verify the interpretation of job requirements 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Job requirements are checked for compliance in accordance with instructions 

    ASSESSMENT CRITERION 2 
    2. Interpretation of job requirements is verified with all stakeholders according to requirements 

    ASSESSMENT CRITERION 3 
    3. Drawing requirements are altered if required 

    SPECIFIC OUTCOME 2 
    Determine drawing requirements 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Components and/or assemblies are identified and interpreted as per job requirements 

    ASSESSMENT CRITERION 2 
    2. Drawing's requirements are identified, verified and recorded to worksite requirements 

    ASSESSMENT CRITERION 3 
    3. Required detail instructions are identified and recorded to job requirements 

    SPECIFIC OUTCOME 3 
    Prepare to produce drawing 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Drawing medium is selected to meet job requirements 

    ASSESSMENT CRITERION 2 
    2. Drawing's parameters are selected to meet job requirements 

    ASSESSMENT CRITERION 3 
    3. Components are selected from manufacturer's catalogue or specifications obtained to meet job requirements 

    ASSESSMENT CRITERION 4 
    4. Time is not wasted in inserting superfluous information 

    SPECIFIC OUTCOME 4 
    Prepare the computer environment for using computer aided drawing software 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Computer aided drawing software programme is selected and activated in accordance with the task 

    ASSESSMENT CRITERION 2 
    2. Programme is customised and configured to link to available peripherals 

    ASSESSMENT CRITERION 3 
    3. Preparation of the drawing area suits the task in terms of size, scale, parameters and orientation 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The relevant Education, Training, Quality Assurance Body (ETQA) will accredit providers offering learning towards this standard, and register assessors. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    An all rounded understanding of the principles of drawing / draughting
    A well rounded understanding of the methods and techniques of drawing / draughting on a computer
    A comprehensive understanding of drawing parameters, drawing scales and assemblies 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems which relate to the determination of drawing requirements 

    UNIT STANDARD CCFO ORGANISING 
    Organise oneself and one`s activities responsibly and effectively to ensure all aspects of the planning process are completed 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information pertaining to the job requirements 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively with stakeholders in the establishment of job requirements 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology to assist in the planning and application of the preparation of a computer aided drawing 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 263024, which is "Plan and produce two dimensional (2D) Computer Aided Drawings (CAD)", Level 4, 15 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  50018   Further Education and Training Certificate: Computer Aided Drawing Office Practice  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered" 
    2009-02-09  Was CETA until Last Date for Achievement 
    Core  23773   National Certificate: Computer Aided Drawing Office Practice  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered" 
    2006-02-09  Was CETA until Last Date for Achievement 
    Elective  66370   Further Education and Training Certificate: Roof Truss Technology  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. African Academey for the Built Environment NPC 
    2. Mitek Industries SA ( Pty) Ltd 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.