SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Plan and conduct a research project 
SAQA US ID UNIT STANDARD TITLE
14503  Plan and conduct a research project 
ORIGINATOR
SGB Hospitality,Tourism,Travel, Leisure and Gaming 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 11 - Services Hospitality, Tourism, Travel, Gaming and Leisure 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Registered" 
2002-06-12  2005-06-12  SAQA 0742/02 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2006-06-12   2009-06-12  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A person assessed as competent against this unit standard will be able to

Plan, conduct and report on a research project, using a variety of techniques, and evaluate factors which may affect the possibilities for research within the workplace.

This competence will equip individuals with the competence to pose and answer questions in the workplace through a structured research process. It lays the foundation for research skills at higher levels, and contributes to the development of more reflective workers and workplaces. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
No prior learning is presupposed. 

UNIT STANDARD RANGE 
Guides to the scope and complexity of the specific outcomes and essential embedded knowledge are provided in bullet points beneath each. These are prefaced by "for example" since they are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity. These are intended only as a general guide to scope and complexity of what is required. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Plan a research project 
OUTCOME NOTES 
For example:
  • A focus on investigating the implications of a customer-supplier analysis for the quality policies and systems of the workplace 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
    Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
    Questioning (verbal or written) - ask relevant questions linked to the unit standard
    Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 2 
    Collate data using a limited variety of research techniques 
    OUTCOME NOTES 
    For example:
  • At least two alternative approaches to research.
  • A limited variety of research techniques, including document review and literature search. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
    Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
    Questioning (verbal or written) - ask relevant questions linked to the unit standard
    Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 3 
    Analyse data using more than a limited variety of data analysis techniques. 
    OUTCOME NOTES 
    For example:
  • A limited variety of data analysis techniques 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
    Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
    Questioning (verbal or written) - ask relevant questions linked to the unit standard
    Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 4 
    Prepare and present a brief written report on the project. 
    OUTCOME NOTES 
    For example:
  • A brief written report (roughly ten pages) 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
    Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
    Questioning (verbal or written) - ask relevant questions linked to the unit standard
    Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 5 
    Evaluate factors that affect the possibilities for research within the workplace. 
    OUTCOME NOTES 
    For example:
    Evaluation should include reflection on the factors affecting the possibilities for research in the workplace. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    METHOD OF ASSESSMENT
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
    Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
    Questioning (verbal or written) - ask relevant questions linked to the unit standard
    Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant ETQA.
    2. Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA.
    3. Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed under point 4 immediately below.
    4. Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution which is accredited by the relevant ETQA. 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems.

    Relates to specific outcomes:

    Plan a research project.

    Collate data using a limited variety of research techniques.

    Analyse data using more than a limited variety of data analysis techniques.

    Prepare and present a brief written report on the project. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team, group, organisation or community.

    Relates to specific outcomes:

    Plan a research project.

    Collate data using a limited variety of research techniques.

    Analyse data using more than a limited variety of data analysis techniques.

    Prepare and present a brief written report on the project. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Relates to specific outcomes:

    Plan a research project.

    Collate data using a limited variety of research techniques.

    Analyse data using more than a limited variety of data analysis techniques.

    Prepare and present a brief written report on the project. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communication

    Relates to specific outcomes:

    Plan a research project.

    Collate data using a limited variety of research techniques.

    Analyse data using more than a limited variety of data analysis techniques.

    Prepare and present a brief written report on the project. 

    UNIT STANDARD CCFO SCIENCE 
    Use of science and technology

    Relates to specific outcomes:

    Plan a research project.

    Collate data using a limited variety of research techniques.

    Analyse data using more than a limited variety of data analysis techniques.

    Prepare and present a brief written report on the project. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Personal development.

    Relates to specific outcomes:

    Plan a research project.

    Collate data using a limited variety of research techniques.

    Analyse data using more than a limited variety of data analysis techniques.

    Prepare and present a brief written report on the project. 

    UNIT STANDARD NOTES 
    NOTES (1): ESSENTIAL EMBEDDED KNOWLEDGE
    The qualifying learner is able to demonstrate a basic knowledge and understanding of:

    1. At least two established approaches to research.
    2. A limited variety of techniques for conducting research.
    3. A limited variety of techniques for data analysis.
    4. An appropriate structure for a research report in a workplace context.

    NOTES (2): SUPPLEMENTARY INFORMATION
    (Assessment case studies and other supplementary to be developed through the learnership pilots). 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49627   Further Education and Training Certificate: e Records Management  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30   
    Fundamental  21500   National Certificate: Sport and Fitness Leadership  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered" 
    2005-06-12  Was CATHSSETA until Last Date for Achievement 
    Fundamental  67693   National Certificate: Fitness  Level 5  Level TBA: Pre-2009 was L5  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Fundamental  67691   National Diploma: Fitness  Level 5  NQF Level 05  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.