SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Sling material into and remove slung material from a shaft 
SAQA US ID UNIT STANDARD TITLE
256616  Sling material into and remove slung material from a shaft 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
9604  Remove slung material from a shaft  Level 2  NQF Level 02  Complete 
9603  Sling material into a shaft  Level 2  NQF Level 02  Complete 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are responsible for slinging material into and removing slung material from a shaft. People credited with this unit standard are able to:
  • Explain specific requirements pertaining to the slinging material into a shaft removal of slung material from a shaft.
  • Prepare to and sling material into a shaft.
  • Remove slung material from a shaft. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication at NQF Level 1.
  • Mathematical Literacy at NQF Level 1. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the specific requirements pertaining to the slinging of material into a shaft. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The consequences of not adhering to logbook entries are explained in terms of legal and site-specific requirements. 
    ASSESSMENT CRITERION RANGE 
    Logbook entries includes but is not limited to the following:
  • Type of material to be transported.
  • Quantity of material to be transported.
  • Destination.
  • Specific travelling speed.

    Logbooks includes but is not limited to the following:
  • Shaft report book.
  • Driver logbook.
     

  • ASSESSMENT CRITERION 2 
    The type and condition of slinging equipment to be used are explained in terms of legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 3 
    The safety precautions to be taken when connecting material to the conveyance and the securing methods are explained in terms of legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 4 
    The positioning of persons in relation to the equipment is explained in terms of safety, site-specific and operational requirements. 

    ASSESSMENT CRITERION 5 
    The effects on safety when the required signals used when slinging material are not adhered to are explained in terms of legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 6 
    The restrictions regarding the conveying of persons, mineral and explosives are explained in accordance with legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 7 
    The consequences of non-adherence to safety requirements while preparing to sling material are explained in terms of legal, site-specific and operational requirements. 
    ASSESSMENT CRITERION RANGE 
    Consequences must include those for the following:
  • Not using or using defective personal protective equipment.
  • Using defective tools and equipment.
  • Not examining the workplace and material to be slung.
  • Using incorrect signals.
  • Not examining and preparing conveyance and ancillary station devices.
     

  • SPECIFIC OUTCOME 2 
    Prepare to and sling material into the shaft. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Required functional personal protective equipment is used in accordance with its design, legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 2 
    Tools and equipment required for slinging are inspected and used in accordance with manufacturer's specifications and operational requirements. 

    ASSESSMENT CRITERION 3 
    The workplace and material to be slung is examined and hazardous conditions are dealt with in accordance with the relevant procedure. 
    ASSESSMENT CRITERION RANGE 
    Examination must include the following:
  • Illumination.
  • Clearance on station.
  • Cleanliness around shaft area.
  • Positioning and condition of ancillary station devices.
  • Conveyance doors.
  • Loose objects in or on the material to be slung.
  • Protruding objects.
     

  • ASSESSMENT CRITERION 4 
    The material to be slung is positioned, connected and secured in accordance with legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 5 
    The conveyance is clutched for the designated position in accordance with site-specific and operational requirements. 

    ASSESSMENT CRITERION 6 
    The reactions on signals received are in accordance with legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 7 
    Interpersonal interaction is conducted in a positive consistent manner with specified requirements that promotes effective teamwork. 

    ASSESSMENT CRITERION 8 
    Reports are completed accurately in the required format and submitted to the designated personnel on time, in accordance with site-specific and operational requirements. 

    SPECIFIC OUTCOME 3 
    Explain specific requirements pertaining to the removal of slung material from a shaft. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The effects on safety if safety precautions to be taken when slung material is removed from the shaft are not adhered to are explained in terms of legal, site-specific and operational requirements. 
    ASSESSMENT CRITERION RANGE 
    Safety precautions must include the following:
  • Required body position.
  • Use of safety equipment.
  • Clean work area.
  • Securing of rolling stock.
  • Action taken to prevent slung material entering other compartments.
     

  • ASSESSMENT CRITERION 2 
    The effects on safety when the required signals used when the slung material is removed are not adhered to are explained in terms of legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 3 
    The restrictions regarding the conveying of persons, mineral and explosives when removing slung material are explained in accordance with legal, site-specific and operational requirements. 

    SPECIFIC OUTCOME 4 
    Prepare to and remove slung material from a shaft. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Required functional personal protective equipment is used in accordance with its design, legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 2 
    Tools and equipment required to remove slung material from a shaft are inspected and used in accordance with manufacturer's specifications and operational requirements. 

    ASSESSMENT CRITERION 3 
    The workplace is examined and hazardous conditions are dealt with in accordance with the relevant procedure. 
    ASSESSMENT CRITERION RANGE 
    Examination must include the following:
  • Illumination.
  • Clearance on landing.
  • Cleanliness around shaft area.
  • Positioning and condition of ancillary station devices.
  • Conveyance doors.
     

  • ASSESSMENT CRITERION 4 
    The signals transmitted to remove slung material from the shaft are executed in accordance with legal, site specific and operational requirements. 

    ASSESSMENT CRITERION 5 
    Material is lowered and disconnected from the conveyance in accordance with legal, site-specific and operational requirements. 

    ASSESSMENT CRITERION 6 
    Interpersonal interaction is conducted in a positive and consistent manner with specified requirements that promotes effective teamwork. 

    ASSESSMENT CRITERION 7 
    Tools and equipment are prepared for subsequent operations and stored in accordance with site-specific and operational requirements. 

    ASSESSMENT CRITERION 8 
    Ancillary station devices are restored in accordance with site-specific and operational requirements. 

    ASSESSMENT CRITERION 9 
    Reports are completed accurately in the required format and submitted to the designated personnel on time in accordance with legal and site-specific requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and. moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and. guidelines for assessment and. moderation.
  • Moderation must include both internal and. external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:

    Knowledge relating to removing slung material from a shaft:
  • Purpose.
  • Tools, materials and equipment.
  • Methods.

    Occupational Health, Safety and Environmental Issues:
  • Significant hazards and risks related to removing slung material from a shaft, their consequences and mitigating actions.
  • PPE requirements and the reason for each.
  • Environmental issues and mitigating actions.
  • Safe working practices.
  • Emergency procedures.

    Applicable statutory requirements:
  • Relevant clauses from applicable acts and regulations.
  • Codes of practice.
  • Competency requirements and restrictions of personnel removing slung material from a shaft.

    Communication:
  • Reporting requirements and ability.
  • Communicating with relevant personnel.
  • Liaison with associated operations and personnel. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO WORKING 
    The learner demonstrates the understanding that in an underground mining environment effective teamwork is of utmost importance when removing slung material from a shaft. 

    UNIT STANDARD CCFO ORGANISING 
    The learner demonstrates understanding that activities, tools and equipment have to be managed effectively in the shaft and hoist environment. 

    UNIT STANDARD CCFO COMMUNICATING 
    The learner demonstrates the ability to communicate effectively with co-workers in the shaft and hoist environment, in order to ensure safe and effective hoisting operations. 

    UNIT STANDARD CCFO SCIENCE 
    The learner demonstrates an understanding of and ability to use advanced mining equipment and technology in terms of operating the hoist, related equipment and communications systems. 

    UNIT STANDARD CCFO CONTRIBUTING 
    The learner demonstrates understanding that various systems contribute to the overall safety and productivity of an underground working environment, and that it is as important to contribute to the efficiency of those systems as to be supported by them when removing slung material from a shaft. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standards:
  • 9604, "Remove slung material from a shaft", Level 2, 4 credits.
  • 9603, "Sling material into a shaft", Level 2, 4 credits.

    Terminology:

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts, e.g. Mine Health and Safety Act, and Minerals Act and Regulations.
  • Mandatory Codes of Practice.
  • SABS and other relevant standards.
  • Chief Inspector of Mines' Directives.

    Site-Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH and S Risks.
  • Working Guides.
  • Equipment and Materials Specifications.

    Notes to Assessors:

    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember, we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence of the prescribed type and quality as specified in this unit standard that the candidate is able to achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well-documented principles of assessment, namely appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  21841   National Certificate: Winding Engine Driving  Level 3  NQF Level 03  Reregistered  2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.