SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Move and transport saws and cutters between saw shop and processing machines/areas in a Lumber Mill 
SAQA US ID UNIT STANDARD TITLE
263655  Move and transport saws and cutters between saw shop and processing machines/areas in a Lumber Mill 
ORIGINATOR
SGB Forestry 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard reflects the skills, values and knowledge required by people in the sub-field of Forestry and/or wood technology who must be able to move/transport saws and cutters between Saw shop and processing machines/areas in a Lumber Mill.

People credited with this Unit Standard are able to:
  • Explain the scheduling of the collection of used and the delivery of serviced saw blades and cutters in the Lumber Mill.
  • Explain how to identify used saw blades and cutters/knives at the work/holding areas of the Lumber Mill.
  • Explain the correct procedures used for moving saw blades and cutters between the Saw Mill and the Saw Shop.
  • Move/transport correctly saw blades and cutters/knives between the Saw Mill and the Saw Shop of the Lumber Mill. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Mathematical Literacy and Communication skills at ABET NQF Level 3 or equivalent.
  • Understanding of basic activities of the Lumber Milling process, and of the activities performed in the Saw Doctor Shop.
  • Understanding of the specific requirements of the activities performed in the Saw Doctor Shop of the Lumber Mill.
  • Understanding of the equipment used in the Saw Doctor Shop of a Lumber Mill. 

  • UNIT STANDARD RANGE 
    The scope of this Unit Standard covers:
  • The whole environment including equipment, tools and instruments that can be described as the Saw Doctor Shop in the Lumber Mill.
  • All the personnel involved in all the activities in the Saw Doctor Shop.
  • All the material that is handled and used in this work area, including cleaning materials and aids.
  • All the relevant work procedures and safety, health and environmental management requirements relating to the Saw Doctor Shop.

    The context of this Unit Standard relates to the training of a Learner at NQF Level 1 in Saw Doctoring and specifically to move/transport saw blades and cutters between the Saw Mill and the Saw Shop of a Lumber Mill.

    The Level assigned to this Unit Standard, i.e. NQF Level 1, is appropriate because:
  • For foundational competence the Learner has to demonstrate the use of recall and elementary comprehension skills.
  • For practical competence the Learner has to operate in closely defined contexts under close supervision.
  • For reflexive competence the Learner performs directed activities and has no responsibilities for the learning of others.

    The nature of the tasks performed, the scope of learning, involved and the required responsibility levels, are consistent with those generally defined for NQF Level 1. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the scheduling of the collection of used and the delivery of serviced saw blades and cutters in the Lumber Mill. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Collection schedule of used saw blades and cutters is explained according to worksite procedures. 

    ASSESSMENT CRITERION 2 
    The delivery schedule of used saw blades and cutters is explained according to worksite procedures. 

    SPECIFIC OUTCOME 2 
    Explain how to identify used saw blades and cutters/knives at the work/holding areas of the Lumber Mill. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Key features that distinguish used saw blades and cutters/knives are explained according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    Used saw blades and cutters/knives are inspected to check for used markings according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    Faults and markings are communicated to the relevant person according to standard operating procedures. 

    SPECIFIC OUTCOME 3 
    Explain the correct procedures used for moving saw blades and cutters between the Saw Mill and the Saw Shop. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Handling procedures are explained according to worksite procedures. 

    ASSESSMENT CRITERION 2 
    Equipment used to move saw blades and cutters is explained according to worksite procedures. 

    ASSESSMENT CRITERION 3 
    Procedure for in moving saw blades and cutters is explained according to worksite procedures. 

    SPECIFIC OUTCOME 4 
    Move/transport correctly saw blades and cutters/knives between the Saw Mill and the Saw Shop of the Lumber Mill. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Saw blades and cutters/knives are moved carefully and safely to minimize damage and injuries. 

    ASSESSMENT CRITERION 2 
    The necessary documentation is completed for collections and deliveries according to standard operating procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 4 or higher qualification, will assess the learner's competency. Only an Assessor with suitable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.

    Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The Learner will have acquired a basic knowledge of:
  • The materials, tools, equipment and saw maintenance methods used in the Saw Doctor shop of a Lumber Mill.
  • The saws and cutters used in the Lumber Mill.
  • The procedures used to move saws and cutters between the Saw Shop and the Lumber Mill.
  • The correct handling procedures of saws and cutters used in the Lumber Mill.
  • The correct handling, cleaning and storage of work tools and equipment used in the Saw Doctor Shop.
  • Work procedures, safety and health measures, and environmental management principles equivalent to NQF Level 1. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
  • The correct handling procedures of saws and cutters used in the Lumber Mill.
  • The correct handling, cleaning and storage of work tools and equipment used in the Saw Doctor Shop. 

  • UNIT STANDARD CCFO WORKING 
  • Operate as a member of an efficient unit in carrying out the production plan/programme in the Saw Doctor Shop. 

  • UNIT STANDARD CCFO ORGANISING 
  • The correct handling, cleaning and storage of work tools and equipment used in the Saw Doctor Shop. 

  • UNIT STANDARD CCFO COLLECTING 
  • Collect saw blades and cutters from Saw Mill to Saw Shop and delivering them to the desired destination. 

  • UNIT STANDARD CCFO COMMUNICATING 
  • Explain the procedures used to move saws and cutters between the Saw Shop and the Lumber Mill. 

  • UNIT STANDARD CCFO DEMONSTRATING 
  • Collect, clean, store and deliver tools and equipment used in the Saw Doctor Shop, timeously, in an effective and efficient manner. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66269   General Education and Training Certificate: Lumber Milling  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. BMD TEXTILES PTY LTD 
    2. ENB TRAINING SERVICEPTYLTD 
    3. GNBR SOLUTIONS PTY LTD 
    4. MALITINNE PTY LTD 
    5. TAMASA TRAINING PTY LTD 
    6. Tirhani SkillsTraining Pty Ltd 
    7. UMBUSO TRAINING SERVICES 
    8. UMGANO FOUNDATION NPC 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.