SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Manufacture complex wooden pattern equipment 
SAQA US ID UNIT STANDARD TITLE
264056  Manufacture complex wooden pattern equipment 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  40 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
6964  Foundry: Manufacture complex wooden pattern equipment  Level 4  NQF Level 04  40   

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who work, or intend to work in a manufacturing process or similar environment where wooden or metal pattern equipment is required for the manufacturing process. The skills, knowledge and values reflected in this unit standard will contribute towards the achievement of a National Certificate in Foundry Operations at NQF Level 3. Equipment operated in this unit standard is against a set of specific instructions.

People credited with this unit standard are able to:
  • Plan to manufacture complex wooden equipment.
  • Prepare complex wooden pattern equipment layouts.
  • Prepare complex wooden pattern equipment materials.
  • Construct complex wooden pattern equipment.
  • Finish complex wooden pattern equipment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credits allocated to this unit standard assume that the learner has a National Certificate in Foundry Operations NQF Level 3 or an equivalent qualification. It also assume that the learner is working towards a qualification as part of a learning programme, which integrates all the required unit standards.

    The learning time will increase if the learner does not have:
  • A relevant NQF Level 3 qualification.
  • Experience in a relevant field.
  • Demonstrated competence in unit standards relating to manufacturing 3-dimensional regular shaped wooden pattern equipment.

    The learning time will be decreased if the learner has experience in this field because:
  • The learning programme will be adjusted to build on what the learner already knows.
  • The learner can apply to have prior learning recognised. 

  • UNIT STANDARD RANGE 
    The scope and level of this unit standard is indicated by range statements related to the specific outcomes:
  • Complex patterns can have irregular shapes, loose pieces, coreprints and more than one corebox. They can be mounted on boards or loose, split or single piece.
  • Pattern materials include wood, fasteners, glue, wood filler and dowels.
  • Woodworking machinery includes planers, sand bobbins, sand discs, wood lathes, saws and pedestal drills.
  • Fasteners include screws, nails, glue and clamps.
  • Calculations include contraction rate, angles, clearances, pattern parameters and machining allowances.
  • Finishing materials include varnish, paint, sanding sealer and wood filler. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan to manufacture complex wooden equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Technical drawing is interpreted according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    Casting and moulding requirements are obtained from foundry technical staff according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    Sequence of work is planned according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Availability of pattern materials is checked according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    Availability and functioning of woodworking machinery is checked in line with manufacturer's specifications. 

    ASSESSMENT CRITERION 6 
    Job card is completed before, during and after patternmaking activity according to standard operating procedures. 

    ASSESSMENT CRITERION 7 
    Team members are informed of planned work activity according to standard operating procedures. 

    SPECIFIC OUTCOME 2 
    Prepare complex wooden pattern equipment layouts. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Layout boards are prepared according to technical drawing. 

    ASSESSMENT CRITERION 2 
    Pattern equipment requirements are marked out on layout boards according to technical drawing and foundry methodology. 

    ASSESSMENT CRITERION 3 
    Calculations are made based on the interpretation of the technical drawing. 

    ASSESSMENT CRITERION 4 
    Layouts are checked according to standard operating procedures. 

    SPECIFIC OUTCOME 3 
    Prepare complex wooden pattern equipment materials. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Required pattern equipment materials are obtained according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    Wood is planed on woodworking machines according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    Wood is marked out, measured, cut to size and sanded according to layout requirements. 

    ASSESSMENT CRITERION 4 
    Applicable safety, health and environmental principles and procedures are adhered to according to standard operating procedures. 

    SPECIFIC OUTCOME 4 
    Construct complex wooden pattern equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pattern is constructed according to layout requirements. 

    ASSESSMENT CRITERION 2 
    Coreboxes are constructed according to layout requirements. 

    ASSESSMENT CRITERION 3 
    Pattern components are joined or fixed where necessary using techniques according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Coreprints are added to pattern according to layout requirements. 

    ASSESSMENT CRITERION 5 
    Loose pieces are fitted into pattern according to layout requirements. 

    ASSESSMENT CRITERION 6 
    Applicable safety, health and environmental principles and procedures are adhered to according to standard operating procedures. 

    SPECIFIC OUTCOME 5 
    Finish complex wooden pattern equipment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pattern equipment is shaped by hand or machine according to layout requirements. 

    ASSESSMENT CRITERION 2 
    Filleting is done according to layout requirements. 

    ASSESSMENT CRITERION 3 
    Pattern equipment is sandpapered and painted according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Pattern identification is marked on pattern equipment according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    Coreprints and loose pieces are colour coded according to standard operating procedures. 

    ASSESSMENT CRITERION 6 
    Applicable safety, health and environmental principles and procedures are adhered to according to standard operating procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 4 or higher qualification, will assess the learner's competency. Only an Assessor with suitable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following items reflect the type of knowledge that the assessor will evaluate:

    Names & functions of:
  • Applicable pattern manufacturing equipment materials.
  • Pattern equipment finishing materials.

    Attributes, descriptions, characteristics & properties:
  • Loose pattern pieces.
  • Jointing.
  • Layouts.

    Sensory cues:
  • Related to quality pattern equipment.

    Purpose of:
  • Loose pattern pieces.
  • Jointing.
  • Layouts.

    Processes, events, causes and effects, implications:
  • Implications of inaccurate layouts on product quality.
  • Implications of non-conforming pattern equipment on the production process and product.

    Procedures and techniques:
  • Applicable worksite procedures.
  • Applicable safety, health and environmental principles and procedures.
  • Interpretation of technical drawings.
  • Foundry methodology.
  • Drafting techniques.
  • Applicable mathematical computation.
  • Precision measuring techniques.
  • Wooden pattern equipment construction techniques.

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental legislation and regulations.

    Theory, rules, principles, laws:
  • Applicable methoding principles.
  • Applicable geometry and trigonometry principles.
  • Teamwork principles.

    Relationships, systems:
  • The relationship between the manufacturing of complex wooden pattern equipment and efficient quality production. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Relating to pattern equipment construction. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team group, organization or community:
  • By interacting with others to achieve the outcomes. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage my activities and myself:
  • By organising materials and equipment for pattern equipment construction, as required. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • By interpreting layout to determine pattern equipment construction requirements. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • By reporting on progress of pattern construction. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • By interpreting technical drawings and marking out pattern equipment layout. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • How defective pattern equipment would impact on the moulding process. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 6964, "Foundry: Manufacture complex wooden pattern equipment", Level 4, 40 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66489   Further Education and Training Certificate: Foundry Operations  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2013-11-07  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.