SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION: 

National Certificate: Information Technology (Systems Development) 
SAQA QUAL ID QUALIFICATION TITLE
48872  National Certificate: Information Technology (Systems Development) 
ORIGINATOR
SGB Computer Sciences and Information Systems 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
MICTS - Media, Information and Communication Technologies Sector Education and Training Authority  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National Certificate  Field 10 - Physical, Mathematical, Computer and Life Sciences  Information Technology and Computer Sciences 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  131  Level 5  Level TBA: Pre-2009 was L5  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Reregistered  SAQA 10105/14  2015-07-01  2018-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2019-06-30   2022-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
The purpose of this qualification is to enhance readiness and provide entry into the areas of Systems Development at NQF level 5. It prepares learners for entry into the workplace or as undergraduate study in the Systems Development areas covered, providing them with the necessary knowledge needed for further study in the fields of Information Technology and Computer Sciences at Higher Education level.

The qualification is addressing the need in the workplace for nationally recognised qualifications, based on unit standards, that will allow people with workplace experience in the Systems Development areas covered, to request assessments and get recognition for prior learning.

A qualifying learner will be able to communicate effectively with fellow IT staff & users of information technology, understanding the role of technology in a business context and to be able to address business problems with appropriate information technology solutions. Learners will be able to apply the principles of creating computer software by carrying out, under limited supervision, a task of reasonable size to demonstrate an understanding of the knowledge, techniques & skills needed in one or more area of majoring/specialisation that the qualification offers.

A qualifying learner at this level will be a well-rounded IT professional, building on foundational technical skills acquired at NQF level 4, via the National Certificate in IT Technical Development or equivalent. This qualification is expanding the systems development foundation started at NQF level 4 into specialisation fields within systems development, in one or more of the following disciplines:
  • Procedural Programming.
  • Object Oriented Programming.
  • Fourth Generation Language Programming.
  • Web site development.
  • Multimedia.
  • Electronic Commerce.

    The qualification is designed to:
  • Provide qualified learners with an undergraduate entry into the fields of Information Communication Technology (ICT) and Computer Sciences, specialising in the Systems Development area
  • Prepare qualified learners for initial employment into the ICT and related industries. Qualified learners will have a solid understanding of computer industry concepts and to able to work in areas of Systems Development with intermediate technical complexity.
  • Allow the credits achieved in National Certificates relating to Information Technology at NQF level 4 to be used as prior learning for this qualification, where applicable.
  • Allow people with workplace experience in the Systems Development areas covered, to request assessments and get recognition for prior learning.
  • Allow the qualification to be acquired in the traditional way of formal study as well as in the workplace, through Learnerships Schemes or Recognition of Prior Learning (RPL).
  • Assist with professionalisation across the Information Technology Sector. It is intended to allow qualified learners to gain membership of registered professional bodies in the ICT industry.

    Rationale of the qualification

    Similar to the National Certificates in IT at NQF level 4, this qualification has been formulated such that it reflects the workplace-based needs of the Information Technology Industry as expressed by its stakeholders. The input has been used to ensure that the qualification provides the learner with accessibility to be employed within the IT Industry. The qualification may be acquired in the traditional way of formal study as well as in the workplace, either through learnerships or by recognition of prior learning (RPL).

    Academically this National Certificate is intended to be an entry-level qualification, at the Higher Education band, in the area of Systems Development. The qualification builds on from the National Certificate in Information Technology: Systems Development at NQF level 4, and it also facilitates entry into the Systems Development field from other related fields. It aims to enhance readiness for further study in Information Technology and related fields at the Higher Education level, as well as providing for initial employment in the computer industry.

    One of the most important needs for this qualification is to provide for RPL. There are currently no unit standards based registered qualifications for Software Development at the higher education level. However, computer programs are written, installed, maintained and upgraded on a daily basis in a number of different industry sectors. Many areas of training in this field if currently not provided against nationally recognised standards, which this qualification will be addressing.

    The qualification may be acquired in the traditional way of formal study as well as in the workplace, through learnerships or RPL. Acquiring the qualification through learnerships or RPL, has the potential of addressing the problems of the past, where newly qualified people getting into the industry struggled to get employment, because they were required to have practical experience. People with workplace experience in the areas covered by this qualification will now also be allowed to request assessment and get recognition for prior learning.

    The qualification provides the learner with the flexibility to articulate in the IT environment with a wide variety of specialisation options and to articulate within the Telecommunications, Information Technology and Electronic Industries and other industries where IT is a key component, like the Financial Services or Insurance Industries. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that the learner must be competent in skills gained at the further education and training band, with Computer Studies as an advantage, but not a requirement. A learning assumption of this qualification is foundational skills in communication and mathematical literacy as required by NQF level 4 qualifications. Further learning assumed is the ability to use a personal computer competently.

    The assumed learning can be acquired in the traditional way of formal study as well as in the workplace. Acquiring the competencies in a workplace (either via formal skills programmes or normal on-the-job training) has the potential of addressing the problems of the past, where formal qualifications were only obtainable by way of formal study.

    Recognition of prior learning (RPL)
    This qualification may be achieved through the recognition of prior learning, which includes formal, informal and non-formal learning and work experience.
    Achieving unit standards through RPL

    Any learner wishing to be assessed to achieve credits in respect of any or all of the unit standards specified in this qualification may arrange to do so without having to attend further education or training.
    Achieving the qualification through RPL

    To achieve the qualification through RPL, the learner must submit him/herself to be assessed against the integrated assessment criteria of this qualification. 

    RECOGNISE PREVIOUS LEARNING? 

    QUALIFICATION RULES 
    Rules regarding NQF levels of credits

    The qualification consists of a minimum of 131 credits and has been designed in accordance with the SAQA rules of combination:

    Rules regarding Fundamental and Core:
    1. All fundamental outcomes are compulsory for this qualification (31 credits).
    2. All core outcomes are compulsory (75 credits).

    Rules regarding Electives:
    1. A minimum of 25 elective credits needs to be completed out of one of the elective specialisation fields listed in the table below. If a programming specialisation is chosen, then all the unit standards in the chosen fields must be completed together, to be recognised as a specialisation stream.
    2. A learner may specialise in more than one elective stream, as long as the rule listed above has been adhered to.
    3. The qualification description will list the fields of specialisation that have been completed (according to the rules of the previous two points) on the qualification document.
    4. Additional standards from any other SAQA field or sub-field may be added to the listed electives. 

    EXIT LEVEL OUTCOMES 
    A learner will be able to:
  • Communicate effectively with fellow IT staff & users of information systems
  • Understand the role of technology in the business context.
  • Demonstrate an understanding of problem solving techniques, and how to apply them in a systems development environment
  • Demonstrate an understanding of Systems Development, with all its implications
  • Relate business problems and information technology solutions
  • Apply the principles of creating computer software

    The following exit level outcomes will depend on the specialisation field(s) chosen:
  • Carry out, under supervision, a task of reasonable size to demonstrate an understanding of the knowledge, techniques & skills needed in one or more area of majoring/specialisation

    In addition to the above, unit standards will be utilised to provide depth of specification of the outcomes ranges and the assessment criteria and processes.

    Furthermore, the assessment process should also cover the following generic components:
  • Measure the quality of the observed practical performance as well as the theory and underpinning knowledge behind it;
  • Use methods that are varied to allow the learner to display thinking and decision making in the demonstration of practical performance;
  • Maintain a balance between practical performance and theoretical assessment methods to ensure each is measured in accordance with the level of the qualification; and
  • Ensure that the relationship between practical and theoretical is not fixed but varies according to the outcomes being assessed.

    Assessment of Critical Cross-field Outcomes

    To ensure applicability of Fundamental and Critical Cross-field Outcomes, this should be assessed as part of Core and Elective assessments. 

  • ASSOCIATED ASSESSMENT CRITERIA 
    In particular, assessors should check that the learner is able to demonstrate an ability to consider a range of options and make decisions, meeting the following criteria:

    1. Effective Communication is demonstrated with fellow IT staff & with users of information systems, in the form of written and verbal communication

    2. An understanding of different types of computer systems and the use of computer technology in business is demonstrated, being able to:
  • Describe the different computer systems and associated hardware and network configurations
  • Describe the staffing and the operations, development and control activities in a modern computing environment
  • Demonstrate an understanding of the social and economic implications of the use of computers

    3. Demonstrated by being able to:
  • Applying logical problem solving and error detection techniques
  • Demonstrate how search and sort techniques are used in computer programs
  • Design computer system inputs and outputs

    4. Demonstrated by being able to:
  • Demonstrate an understanding of estimating an development unit of work, and the implications of late delivery
  • Apply information gathering techniques for computer systems development
  • Working effectively as a team member within a development environment, taking part in team activities and understanding different roles within different support teams
  • Conduct a technical practitioners meeting
  • Conduct oneself professionally in business based on a set of professional ethics and values regarding the Information Technology discipline

    5. Demonstrated by:
  • Identifying and recommending appropriate IT solutions to business problems

    6. Demonstrated by:
  • Developing a complete program to meet given business specifications
  • Write a computer program using a chosen computer programming language
  • Creating database access for a computer application, using structured query language
  • Test a computer program against given specifications
  • Create documentation for a computer program

    7. Demonstrated by:Applying the knowledge of the techniques & skills needed in one or more area of majoring/ specialisation, covering the assessment criteria explained in the unit standards selected in the specialising area.

    Integrated Assessment

    Development of the competencies may be through a combination of formal and informal learning, self-learning, training programmes and work-based application.
    The practical, applied, foundational and reflexive competencies demonstrated for the group of assessment criteria in this qualification, must prove that the whole competence is more than the sum of the parts of the competencies.
    Providers should conduct diagnostic and formative assessment. Formative, continuous and diagnostic assessments should also take place in the work place, if applicable. The learner should also be able to assess him or herself and determine readiness for a summative assessment against this qualification.

    During integrated assessments the assessor should make use of formative and summative assessment methods and should assess combinations of practical, applied, foundational and reflexive competencies. Input to completing the Integrated Assessment typically makes use of combinations of the following assessment methods:

    1. Time-constrained written examinations
    2. Coursework Evaluations
    3. Continuous Evaluation
    4. Practical Evaluation
    5. Evaluation of Portfolios of Evidence 

  • INTERNATIONAL COMPARABILITY 
    This qualification and associated unit standards have been evaluated with, and are comparable to equivalent qualifications and standards on the following Qualifications Frameworks:
  • New Zealand NQF,
  • Australian NQF,
  • British NVQs.

    Furthermore, input to the development of this qualification has been compared against international standards and qualifications, specifically those of New Zealand, Australia and the United Kingdom. International and South African support for the proposed conceptual framework and content is evidenced in the following:
  • India's TATA InfoTech Qualification for Software Developers,
  • City and Guilds Certificate and Diploma for Software Developers and IT Technicians,
  • NCC Education's (UK-based) International Certificate and Diploma in Computer Studies for IT Professionals
  • Microsoft MCSD certification
  • The wide and narrow consultative process, and formal research, reflected in the supporting design report that accompanies this qualification submission. 

  • ARTICULATION OPTIONS 
    Upon successful completion of the qualification, the qualifying learner will have a thorough understanding of the role of an IT Systems Development person and be able to competently carry out the exit level outcomes of the qualification, in a business environment. The qualification may be acquired in the traditional way of formal study as well as in the workplace, through learnerships, or by a method of RPL.

    A qualifying learner at this level will be a well-rounded IT professional building on foundational technical skills acquired at NQF level 4, via the National Certificate in IT Systems Development or equivalent. This qualification covers various specialisation(s) into IT Systems Development or to any other related vertical or enabled markets.

    This qualification was developed to allow for further study in Information Technology and related fields at Higher Education levels. It will allow the qualified learner to progress to further qualifications either in Systems Development or other IT domains, or into related industries where IT is a key component. In particular, this qualification has been designed to allow entry into the National Diploma in Systems Development at NQF level 5 and into current tertiary qualifications at National Diploma level. 

    MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this qualification must be registered as an assessor, at the appropriate level, with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be approved as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQA's policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies).
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards, exit level outcomes as well as the integrated competence described in this qualification.
  • Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.
  • Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited for assessment by the relevant ETQA.

    To ensure that national standards are maintained, the final assessment should be conducted on the following basis, which will be under the control of the relevant ETQA's (ISETT SETA or other relevant ETQA's):
  • Integrated assessment of the learner needs to be undertaken using the necessary assessment tools (viz. ETQA approved assessor guides) to ensure consistent integrated assessment. The setting of assessor guides can be performed by the ETQA itself or a nominated body or bodies.
  • Assessment can be institutional and/or workplace based, but must be done by a registered assessor.
  • ETQA verification (external moderation) will be undertaken as required, to ensure that the quality of NQF standards are maintained nationally. 

  • CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    The criteria to register as an assessor includes the following:
  • Assessors should be registered as assessors with the relevant ETQA, in accordance with the policies and procedures defined by the ETQA.
  • Have a relevant academic qualification or equivalent recognition, at a level higher that the qualification being assessed. In addition the person will need to have at least two years industry experience.
  • All registered assessors must at least have met the requirements of the generic assessor standard, and should be certificated by the ETDP SETA or by the relevant ETQA in agreement with the ETDP SETA in this regard.
  • For the assessment of IT specific unit standards, assessors must have competency in the skills specified in the unit standard or specialisation area. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this qualification was Reregistered in 2012; 2015. 

    NOTES 
    This section contains additional information to support the implementation of this qualification. It suggests the ways in which the learning assumed to be in place could by acquired as well as different ways in which learnerships (that will lead to this qualification) could be implemented.

    A. Additional notes on learning assumed to be in place for this qualification
    This qualification has been designed with the assumption that the necessary foundational skills have been acquired at NQF level 4. If a learner has not acquired these skills, they will struggle with some of the concepts of the unit standards covered by this qualification.
    This qualification has been designed with the assumption that the necessary foundational skills have been acquired at NQF level 4. If a learner has not acquired these skills, they will struggle with some of the concepts of the unit standards covered by this qualification.
    Although these foundational skill are in many cases stated as a requirement by stakeholders, to make learners more employable, such unit standards could not be included as part of this qualification, as it will lower the standard of the qualification. Because Computer Studies is currently not a compulsory subject in schools, it could also not be assumed that every school leaver will have the necessary fundamental IT skills required for this qualification.
    It is therefor very important to assist learners to be able to acquire the knowledge that are assumed to be in place for the unit standards attempted in this qualification. Depending on the specialisation stream some additional assumed knowledge might need to be acquired.

    Examples of such unit standards are the following:
  • Investigate the use of computer technology in an organisation.
  • Describe types of computer systems and associated hardware configurations.
  • Demonstrate an understanding of the principles of developing software for the internet.
  • Explain the principles of computer networks.
  • Explain how data is stored on computers.
  • Describe the difference between programming in Object Oriented and Procedural Languages.
  • Design a computer program according to given specifications.
  • Explain Computer Architecture Concepts.
  • Apply the principles of computer programming.

    The following methods are suggested ways of acquiring the necessary competencies, to the level required for this qualification:
    1. Specific "bridging" programmes (short courses) could be used, which could already exist or need to be built.
    2. Specific "bridging" programmes could be built into the learnerships that will lead to this qualification, as skills programmes, that will ensure these competencies are achieved
    3. The National Certificate in Systems Development at NQF level 4 could be completed.

    B. Additional notes as ETQA guidelines for learnership implementation of this qualification.
    This qualification has been designed to accommodate various learnerships in the area of Systems Development. The intention is that different learnerships will be used to cover the different specialisation streams of the qualification, to cover a specific need that arises in the industry. In other words, the intention is that multiple learnerships will be used to lead to this one national qualification. Learnership titles should reflect the necessary specialisation(s) chosen within the qualification, to allow the industry to experience the value of the new unit standard based qualifications, as addressing specific needs highlighted as part of the research in the industry. This is crucial in addressing the perception in the industry that national qualifications are not addressing the workplace needs.

    In addition, as mentioned in the previous section, learnerships are ideal vehicles for ensuring learning assumed to be in place are covered as part of the learnership. Learnerships will often cover more than national qualifications, to address the specific needs that the learnerhip in trying to address. This could result in learnership-delivery of national qualification being the route that industry prefer, for acquiring national qualifications.

    C. Additional notes regarding articulation to this qualification
    It is important to note that although this qualification was designed as part of a broad IT qualifications framework, articulation to this qualification might need additional study in the learning assumed to be in place. It is suggested that additional learning assumed to be in place be acquired in ways explained above, to ensure learners are properly equipped for the area of specialisation chosen. Although the qualification was developed with articulation in mind, the size of the ICT industry results in areas of specialisation that acquire very specialised skills, which cannot be covered adequately in all qualifications. Learners attempting this qualification and/or training providers planning to deliver this qualification (or some of its unit standards) need to pay attention to this fact when articulating into this area. 

  • UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  115359  Demonstrate an understanding of the handling of error in a computer programming environment  Level 4  NQF Level 04 
    Core  115391  Demonstrate an understanding of the principles of the internet and the world-wide-web  Level 4  NQF Level 04 
    Core  115358  Apply information gathering techniques for computer system development  Level 5  Level TBA: Pre-2009 was L5 
    Core  115392  Apply principles of creating computer software by developing a complete programme to meet given business specifications  Level 5  Level TBA: Pre-2009 was L5  12 
    Core  115365  Apply the principles of designing computer system inputs and outputs  Level 5  Level TBA: Pre-2009 was L5 
    Core  114048  Create database access for a computer application using structured query language  Level 5  Level TBA: Pre-2009 was L5 
    Core  114049  Demonstrate an understanding of Computer Database Management Systems  Level 5  Level TBA: Pre-2009 was L5 
    Core  115373  Demonstrate an understanding of sort and search techniques used in computer programming  Level 5  Level TBA: Pre-2009 was L5 
    Core  115367  Demonstrate logical problem solving and error detection techniques  Level 5  Level TBA: Pre-2009 was L5 
    Core  115362  Manage software development source files using appropriate tools  Level 5  Level TBA: Pre-2009 was L5 
    Core  115388  Produce documentation for a computer program to agreed standards  Level 5  Level TBA: Pre-2009 was L5 
    Core  115384  Test a computer program against a given specification  Level 5  Level TBA: Pre-2009 was L5 
    Fundamental  114076  Use computer technology to research a computer topic  Level 4  NQF Level 04 
    Fundamental  116389  Write a technical report  Level 4  NQF Level 04 
    Fundamental  115431  Analyse feedback contexts and apply constructive feedback techniques  Level 5  Level TBA: Pre-2009 was L5 
    Fundamental  114051  Conduct a technical practitioners meeting  Level 5  Level TBA: Pre-2009 was L5 
    Fundamental  114055  Demonstrate an awareness of ethics and professionalism for the computer industry in South Africa  Level 5  Level TBA: Pre-2009 was L5 
    Fundamental  114059  Demonstrate an understanding of estimating a unit of work and the implications of late delivery  Level 5  Level TBA: Pre-2009 was L5 
    Fundamental  114050  Explain the principles of business and the role of information technology  Level 5  Level TBA: Pre-2009 was L5 
    Fundamental  13925  Present information in a public setting  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115368  Apply advanced HTML and associated techniques to build a web site for business applications  Level 5  Level TBA: Pre-2009 was L5  12 
    Elective  115363  Apply fundamental principles of Object Oriented Programming to solve a given problem  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115386  Apply the principles of creating batch and interactive computer programs using a procedural programming language  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115390  Create an application for a single-user personal computer using a fourth generation language  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115364  Create animation for a multimedia/web-based computer application  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115371  Create digitised sound for a multimedia/web-based computer application  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115370  Create digitised still images for a multimedia/web-based computer application  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115375  Create digitised video for a multimedia/web-based computer application  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115366  Create graphic elements for a multimedia/web-based computer application  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115379  Create object scripts for a multimedia/web-based computer application  Level 5  Level TBA: Pre-2009 was L5  20 
    Elective  115383  Demonstrate an understanding of the principles of designing and building an e-Commerce web site  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115376  Demonstrate an understanding of the principles of implementing and managing a web server  Level 5  Level TBA: Pre-2009 was L5  10 
    Elective  115385  Demonstrate an understanding of the principles of implementing and managing an e-Commerce web site  Level 5  Level TBA: Pre-2009 was L5  12 
    Elective  115374  Demonstrate an understanding of the use of web-sites in business  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115380  Demonstrate an understanding of the various types of e-commerce applications  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115372  Demonstrate an understanding of tools and products available for web-site development  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115360  Demonstrate fourth generation language computer programming skills  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115369  Design and build a web-site using simple HTML  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115377  Explain the IT components of an e-Commerce system  Level 5  Level TBA: Pre-2009 was L5 
    Elective  115387  Apply the principles of creating a computer program using a procedural programming language in a GUI environment  Level 6  Level TBA: Pre-2009 was L6  14 
    Elective  115381  Apply the principles of creating a computer program using an OOP language in a GUI environment  Level 6  Level TBA: Pre-2009 was L6  12 
    Elective  115382  Apply the principles of creating computer programs containing advanced algorithms using a procedural programming language  Level 6  Level TBA: Pre-2009 was L6  12 
    Elective  115361  Create digitised text for a multimedia/web-based computer application  Level 6  Level TBA: Pre-2009 was L6 
    Elective  115378  Demonstrate an understanding of advanced object-oriented programming  Level 6  Level TBA: Pre-2009 was L6  14 
    Elective  115389  Design a computer application for a single-user personal computer for programming with a 4GL  Level 6  Level TBA: Pre-2009 was L6  12 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. 2 KO International 
    2. Academy of Business and Computer Studies- PTA 
    3. Accenture Learning Solution (Pty) Ltd 
    4. Ankalite (Pty) Limited 
    5. AUM IT Solutions 
    6. Boston Technology Campus (Pty) Ltd 
    7. Broadband College of Technology 
    8. Bytes People Solutions A Division of Altron TMT (Pty) Ltd 
    9. Calicom Trading 215 (Pty) Ltd 
    10. Careers IT (Pty) Ltd 
    11. Critical Skills Training (Pty) Ltd 
    12. CTU Training Solutions 
    13. Cyberfox 
    14. Cyberlik IT Solutions 
    15. Dantall 
    16. DESTO (PTY) LTD 
    17. DL Trading Enterprise 
    18. DVG Property (Pty)Ltd 
    19. Ekasi IT Solutions CC 
    20. EOH Abantu (Pty) Ltd 
    21. Ericsson South Africa (Pty) Ltd 
    22. Falcon Business Institute (Pty) Ltd 
    23. Germiston Business College (Pty) Ltd 
    24. Gijima Holdings (Pty) Ltd 
    25. Hlanganani ICT (Pty) Ltd 
    26. Ict International Consulting Training Worx Pty Ltd 
    27. In Excess Trading 22 T/A ATTI Polokwane 
    28. Information Technology Resource Centre 
    29. iSolve Business Solutions (Pty) Ltd 
    30. IT Certification Academy 
    31. Ithemba Lentsha Skills Development Institute (Pty) Ltd 
    32. Johannesburg City College (Pty) Ltd 
    33. Jumpco (Pty) Ltd 
    34. Khuphulanani Training Institute (Pty) Ltd 
    35. Konani Training and Development Institute 
    36. Kondi Computer Training 
    37. Leseding Computer Systems (Pty) Ltd 
    38. Loxtion Server CC 
    39. Lukhanyiso Research and Development Services CC t/a TSD Business Solut 
    40. Makhophila Business Enterprise 
    41. Malope IT Solutions 
    42. Mamelodi Digital Centre cc 
    43. Mash Computer Training 
    44. Mass Computer Training And Printers 
    45. MasterGrade IT 
    46. Mpande Technologies cc 
    47. NCM Computer and Business Academy 
    48. NET2G Technologies (Pty) Ltd t/a EduCampus 
    49. NetCampus (Pty) Ltd. 
    50. Nextgen Training Solutions (Pty) Ltd 
    51. On the Ball College Pty ltd 
    52. Phokophela Investment Holdings (Pty) Ltd 
    53. Pinetown Institute of Technology 
    54. Quantum Career Development (PTY) LTD 
    55. Revolution Media Academy (Pty) Ltd 
    56. Richfield Graduate Institute of Technology Pty Ltd 
    57. St Austins College (Pty) Ltd 
    58. Titan Trade Technologies (Pty) Ltd 
    59. Torque Technical Computer Training (Pty) Ltd 
    60. Tshedza Training Technologies (Pty) Ltd 
    61. Work Skills Resources 
    62. Xantium Trading 304 
    63. Xtensive ICT Academy (Pty) Ltd 
    64. Xylo Trading 12 (Pty) Ltd 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.