SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Maintain sleepers 
SAQA US ID UNIT STANDARD TITLE
120034  Maintain sleepers 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The qualifying learner is capable of:
  • Inspecting and classifying the condition of sleepers and fastenings, replacing or spacing sleepers in track and tamping sleepers, in accordance with specifications and instructions.
  • This Unit Standard will contribute to the full development of a professional community of Rail Construction and Maintenance workers.
  • The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the Rail Construction and Maintenance environment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in the following:
  • Mathematical Literacy at NQF Level 1
  • Communication at NQF Level 1
  • Use of materials and components used in rail construction and maintenance 

  • UNIT STANDARD RANGE 
    The typical scope of this Unit Standard:
  • Competency must be demonstrated

    > In different weather and environmental conditions
    > Preferably in daytime
    > In different yard layouts/mainline/sidings/private sidings/shed/workshop (might or might not include overhead traction and Railway signalling)
    > Within a specific time span
    > By handling heavy materials
    > Different site conditions, e.g. cuttings, embankments, multiple lines, tunnels, sites with restricted accessibility, etc
  • Sleepers include:

    > Wooden sleepers
    > Steel sleepers
    > Concrete sleepers
    > Transition ladders
    > Rail substitute sleepers
    > Sleepers on bridges without ballast
  • Fastening includes different fastenings for different types of sleepers, as well as drilling of sleepers
  • Handling includes:

    > Storage
    > Loading
    > Transporting
    > Stacking
    > Off-loading
    > The use of push trolleys and rail transporters to transport permanent way materials
  • The learner must be able to tamp sleepers manually, as well as by using small plant.
  • The learner should prove competence in the maintenance of sleepers on all types of railway track. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare to maintain sleepers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Relevant information pertaining to the type of material and location is obtained and interpreted from inspection reports. 

    ASSESSMENT CRITERION 2 
    Quantities are calculated accurately. 

    ASSESSMENT CRITERION 3 
    A work plan detailing time frames and resources is compiled according to organisational requirements. 

    ASSESSMENT CRITERION 4 
    Material, tools and equipment are obtained and verified for correctness. 

    ASSESSMENT CRITERION 5 
    Relevant role-players including team members are made available and informed of their roles and duties. 

    ASSESSMENT CRITERION 6 
    Relevant personal protective equipment is identified and applied correctly. 

    ASSESSMENT CRITERION 7 
    Appropriate protection is applied in accordance with procedures. 

    ASSESSMENT CRITERION 8 
    Work environment is safe-guarded in accordance with regulations and procedures. 

    ASSESSMENT CRITERION 9 
    Sleepers and fastenings are inspected and classified according to specifications. 

    SPECIFIC OUTCOME 2 
    Replace and space sleeper in track. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Sleepers are handled correctly in accordance with safety and housekeeping procedures and requirements. 

    ASSESSMENT CRITERION 2 
    Work is prepared before sleeper is replaced/spaced. 

    ASSESSMENT CRITERION 3 
    Sleepers are placed correctly in accordance with instruction. 

    ASSESSMENT CRITERION 4 
    Sleepers are spaced correctly according to sleeper reference marks. 

    ASSESSMENT CRITERION 5 
    Squareness of sleepers is correct where relevant. 

    ASSESSMENT CRITERION 6 
    Appropriate fastenings are placed at required position in accordance with instruction (track gauge). 

    ASSESSMENT CRITERION 7 
    Sleeper fastenings are fastened in accordance with specifications. 

    SPECIFIC OUTCOME 3 
    Tamp sleepers. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Ballast is boxed in, according to specifications. 

    ASSESSMENT CRITERION 2 
    Railway track is lifted according to instruction. 

    ASSESSMENT CRITERION 3 
    The correct tamping method is used in accordance with procedures. 

    ASSESSMENT CRITERION 4 
    Ballast is trimmed according to correct profile. 

    SPECIFIC OUTCOME 4 
    Complete post-maintenance operations. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Quality of completed work is verified and appropriate corrective action is taken where required. 

    ASSESSMENT CRITERION 2 
    Basic measurements are performed in accordance with procedures. 

    ASSESSMENT CRITERION 3 
    Work site is restored and cleared as per instructions. 

    ASSESSMENT CRITERION 4 
    Protection is withdrawn in accordance with procedures. 

    ASSESSMENT CRITERION 5 
    Environmental regulations are adhered to during maintenance process. 

    ASSESSMENT CRITERION 6 
    Relevant documentation and reports are completed accurately and legibly. 

    ASSESSMENT CRITERION 7 
    Role players including team members are informed of their roles and duties. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Unit Standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Unit Standard must be accredited as a provider with the relevant ETQA.
  • The relevant ETQA would be responsible for moderation of learner achievements of learners who meet the requirements of this Unit Standard. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Types of sleepers and their properties and applications
  • Handling requirements with regard to sleepers
  • Drilling methods and procedures
  • Sleeper placing procedures
  • Sleeper spacing procedures
  • Requirements with regards to different types of sleeper fastenings
  • Specifications with regards to sleeper spacing and placing
  • Tamping procedures
  • Box-in procedures
  • Code of Practice 29
  • Relevant environmental regulations and legislation
  • Health, Safety & Housekeeping procedures and regulations
  • Reporting and documentation requirements and procedures 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    Learners can understand the importance of:
  • Safety in the workplace
  • Being a team player in the work environment, organisation and in society
  • Economic impact of rail track operations 

  • UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Learners can solve problems with regard to:
  • The correctness, quantity and quality of tools, equipment and materials
  • Failure of equipment
  • Temperature ranges/weather
  • Availability of resources
  • Non-availability of other departments
  • Condition of sleepers and fastenings
  • Fastening combinations to obtain the required track gauge 

  • UNIT STANDARD CCFO WORKING 
    Learners can work effectively with others and in teams when:
  • Relevant role-players are informed and available
  • Allowing other departments to perform their functions
  • Sleepers are transported and loaded/off-loaded
  • Sleepers are placed and spaced 

  • UNIT STANDARD CCFO ORGANISING 
    Learners can organise and manage one self:
  • By observing and assessing work area to determine if work can proceed
  • When informing team members of hazards in the work area
  • When calculating quantities
  • Preparation work is done before sleeper is replaced/spaced 

  • UNIT STANDARD CCFO COLLECTING 
    Learners can collect, analyse, organise and critically evaluate information by:
  • Assessing if sleepers and sleeper fastenings are in accordance with specifications and instructions
  • Assessing if ballast is in accordance with correct profile
  • Taking measurements to verify quality of completed work
  • Inspecting and classifying sleepers 

  • UNIT STANDARD CCFO COMMUNICATING 
    Learners can communicate effectively by:
  • Completing relevant documentation
  • Communicating with relevant parties for example, subordinates, technical personnel, etc 

  • UNIT STANDARD CCFO SCIENCE 
    Learners can use science and technology by:
  • Classifying sleepers and fastenings
  • Using equipment to box ballast and replace/space/tamp sleepers
  • Calculating quantities correctly
  • Taking measurements to verify quality of completed work
  • Applying correct tamping methods 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Learners can understand:
  • Impact of incorrect spacing or placing of sleepers on track
  • Impact of maintenance operations on the environment
  • Influence of well maintained sleepers on all track components 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49795   National Certificate: Rail Construction and Maintenance  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  TETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. R and H Rail (Pty) Ltd 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.