SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Determine the physical characteristics of coal related to hardness

SAQA US ID	UNIT STANDARD TITLE
110193	Determine the physical characteristics of coal related to hardness
ORIGINATOR
SGB Mining and Minerals
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 06 - Manufacturing, Engineering and Technology			Fabrication and Extraction
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 3	NQF Level 03	5
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

This unit standard is for persons responsible for determining the physical properties of coal. A person credited with this unit standard can:

Demonstrate knowledge relating to the physical properties and the rank of coal.

Determine the Hardgrove index of coal

Determine the Abrasiveness index.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

As listed below or their equivalent: -

Sciences, Communications and Mathematics at ABET Level 4 or equivalent

Relevant health, safety and environmental standards.

Unit standard - Determine the mass of a substance.

Unit standard - Reduce bulk and particle size of a dry solid sample.

Unit standard - Determine the particle size distribution of a sample by means of the sieving technique.

UNIT STANDARD RANGE

This competence is applicable to learners in coal laboratories.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Demonstrate knowledge relating to the physical properties and the rank of coal.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Hazards and risks pertaining to the process are identified and explained with reference to, health, safety and environmental impact. The appropriate preventive measures are described in accordance with specified requirements.

ASSESSMENT CRITERION 2

2. The equipment needed for the selected tests is identified and its function explained in accordance with specified requirements.

ASSESSMENT CRITERION 3

3. The purpose of the specified tests is explained in terms of their role in establishing the quality of the coal.

ASSESSMENT CRITERION 4

4. The basic characteristics that identify each rank of coal are listed and explained in terms of the Hardgrove, Friability and Abrasiveness indices.

SPECIFIC OUTCOME 2

Determine the Hardgrove index of coal.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. The required personal protective and safety equipment is available, operational, fit for purpose, used and maintained in accordance with specified requirements.

ASSESSMENT CRITERION 2

2. The samples are identified, verified and prepared for testing in accordance with specified requirements.

ASSESSMENT CRITERION 3

3. The equipment needed for the process is verified, used and maintained in accordance with specified requirements.

ASSESSMENT CRITERION 4

4. The Hardgrove index is determined in accordance with specified requirements.

ASSESSMENT CRITERION 5

5. Data is processed and reported in accordance with specified requirements and quality control procedures.

ASSESSMENT CRITERION 6

6. Common problems and their effect on the process are explained and/or dealt with in accordance with specified requirements.

ASSESSMENT CRITERION RANGE

Common problems must include the following:

Incorrect stage crushing of sample to be used for analysis

Inconsistent moisture content

Incorrect rotation setting

Incorrect amount of grinding balls

Worn grinding equipment and test sieves

Inconsistent screening

ASSESSMENT CRITERION 7

7. The work is conducted to meet health, safety and environmental standards in accordance with specified requirements.

ASSESSMENT CRITERION RANGE

Health, safety and environmental issues must include

Housekeeping

Waste disposal

Storage

ASSESSMENT CRITERION 8

8. The consequences of non-compliance with specified requirements are explained with respect to personal and team health and safety, impact on the environment, production, cost and lost time.

SPECIFIC OUTCOME 3

Determine the Abrasiveness index.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. The required personal protective and safety equipment is available, operational, fit for purpose, used and maintained in accordance with specified requirements.

ASSESSMENT CRITERION 2

2. The samples are identified, verified and prepared for testing in accordance with specified requirements.

ASSESSMENT CRITERION 3

3. The equipment needed for the process is identified, verified, used and maintained in accordance with specified requirements.

ASSESSMENT CRITERION 4

4. The abrasiveness index is determined in accordance with specified requirements.

ASSESSMENT CRITERION 5

5. Data is processed and reported in accordance with specified requirements and quality control procedures.

ASSESSMENT CRITERION 6

6. Common problems and their effect on the process are explained and/or dealt with in accordance with specified requirements.

ASSESSMENT CRITERION RANGE

Common problems must include the following:

Incorrect stage crushing

Incorrect speed of rotation

Inconsistent moisture content

ASSESSMENT CRITERION 7

7. The work is conducted to meet health, safety and environmental standards in accordance with specified requirements.

ASSESSMENT CRITERION RANGE

Health, safety and environmental issues must include

Housekeeping

Waste disposal

Storage

ASSESSMENT CRITERION 8

8. The consequences of non-compliance with specified requirements are explained with respect to personal and team health and safety, impact on the environment, production, cost, quality and lost time.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

1. Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
2. Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
3. Moderation of assessment will be overseen by the relevant ETQA according the moderation guidelines in the relevant qualification and the agreed ETQA procedures.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Candidates are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the candidate`s performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the unit standard.

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identify and solve problems and make decisions using critical and creative thinking.

Note: The ability of the candidate to identify technical problems, sub-standard and hazardous conditions, assess and take appropriate action.

UNIT STANDARD CCFO WORKING

Work effectively with others as members of a team, group, organisation or community.

Note: The candidate is required to maintain the link in the process in order to achieve production, health, safety and environmental targets.

UNIT STANDARD CCFO ORGANISING

Organise and manage themselves and their activities responsibly and effectively.

Note: The candidate is required to prioritise and integrate the various activities in order to meet the set targets.

UNIT STANDARD CCFO COLLECTING

Collect, analyse, organise and critically evaluate information.

Note: The ability of the candidate to collect and evaluate information from numerical data and/or physical observations in terms of specified requirements.

UNIT STANDARD CCFO COMMUNICATING

Communicate effectively, using visual, mathematical and / or language skills in the modes of oral and / or written presentations.

Note: The candidates are required to accurately and clearly convey information to relevant personnel.

UNIT STANDARD CCFO SCIENCE

Use science and technology effectively and critically showing responsibility towards the environment and health of others.

Note: The candidate is required to use equipment responsibly to avoid environmental pollution and to safeguard team health.

UNIT STANDARD CCFO DEMONSTRATING

Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

Note: The candidate is aware of his/her role in the organization in terms of social, economic and environmental impact.

UNIT STANDARD ASSESSOR CRITERIA

Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:

Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.

Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.

Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.

The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.

The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.

All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent.

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

UNIT STANDARD NOTES

Terminology
Specified Requirements

Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

Legal

Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).

Mandatory Codes of Practice

SABS and other relevant Standards

Chief Inspector of Mines` Directives

Material Safety Data Sheets

Site Specific

Hazard Identification and Risk Assessments (HIRA)

Occupational Health and Safety Risk Management Programme

Managerial Instructions

Mine Standard Procedures

List of Recorded OH&S Risks

Working Guides

Equipment and Materials Specifications

Relevant Technical Publications

Textbooks

Published Papers

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	64949	National Certificate: Laboratory Practice	Level 2	NQF Level 02	Passed the End Date - Status was "Reregistered"	2023-06-30	As per Learning Programmes recorded against this Qual

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE