SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Undertake finishing and dressing processes in footwear

SAQA US ID	UNIT STANDARD TITLE
11383	Undertake finishing and dressing processes in footwear
ORIGINATOR
SGB Footwear Manufacturing
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 06 - Manufacturing, Engineering and Technology			Manufacturing and Assembly
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 2	NQF Level 02	24
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

This standard is in the elective category of the NQF Level 2 National Certificate in Footwear processes. Learners assessed competent against this standard will be able to finish footwear by hand or by using a range of machines and equipment through identifying and selecting machines and equipment, finishing shoes by hand and using a range of machines and equipment and selecting and preparing consumables. Learners will also be able to apply work instructions. Learners involved in finishing and dressing will use this standard.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

Learners will have attained an ABET Level 4 qualification and will be able to add, subtract, multiply and divide. Learners will also communicate verbally and in writing at ABET Level 4.

UNIT STANDARD RANGE

Machines used for finishing and dressing will include:

Brush and polish.

Edge scouring.

Last slip.

Tack grinding.

Wrinkle chasing.

Embossing.

Cementing.

Quarter reform.
Construction techniques are those that apply to stitch down and stuck on techniques only.
Consumables used when finishing and dressing footwear will include:

Stains.

Waxes.

Laces.

Crayons.

Dressings.

Adhesive.

Embossing foil.

Labels.

Fillers.

Pigments.

Cloths.

Sponges.

Plastic bags.

Tissue paper.

Abrasives.
Hand operations will include:

Edge staining.

Bottom staining.

Last slipping.

Cleaning lining trim

Dressing.

Insert sock.

Faking.

Repairing.

Fillering.

Lacing.

Boxing.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Identifying and selecting appropriate machines and equipment for finishing and dressing footwear.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. The functions of the relevant machines are clearly understood as specified by the manufacturer and enterprise standard operating procedures.

ASSESSMENT CRITERION 2

2. Machines and equipment are identified and appropriately selected for finishing and dressing footwear in accordance with standard operating procedures and job cards.

SPECIFIC OUTCOME 2

Finishing shoes using a range of machinery and equipment.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Shoes are finished using a range of machinery and equipment applying standard operating procedures.

ASSESSMENT CRITERION 2

2. Machine operations are performed in compliance with standard operating procedures and machine manufacturers specifications.

ASSESSMENT CRITERION 3

3. A pair of finished shoes is produced as per customer specifications and standard operating procedures.

SPECIFIC OUTCOME 3

Finishing shoes by hand.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Hand operations are performed in order to finish shoes in compliance with standard operating procedures and machine manufacturers specifications.

ASSESSMENT CRITERION 2

2. The reasons for using hand versus equipment for finishing shoes are clearly understood.

SPECIFIC OUTCOME 4

Selecting and preparing consumables for finishing and dressing footwear.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Consumable specifications are identified and their purpose is clearly understood.

ASSESSMENT CRITERION 2

2. Appropriate consumables are selected using job cards and standard operating procedures in preparation for finishing and dressing footwear.

ASSESSMENT CRITERION 3

3. Consumables appropriate to the finishing of shoes are listed in compliance with standard operating procedures.

SPECIFIC OUTCOME 5

Applying work instructions to finish and dress footwear.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Work instructions and specifications are applied where footwear is finished and dressed.

ASSESSMENT CRITERION 2

2. Instructions on job cards are followed sequentially so that defects are avoided at all times.

ASSESSMENT CRITERION 3

3. Shortfalls are recorded and reported to the appropriate person applying standard operating procedures.

ASSESSMENT CRITERION 4

4. The sequence of finishing and dressing the shoe is explained as per enterprise standard operating procedures.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

The relevant Sector Education and Training Authority or Education and Training Quality Assurance Body will carry our accreditation of learning against this standard. Assessment will be conducted by registered assessors.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

The demonstrated understanding of:

The names, functions and parts of various machines and equipment used in finishing and dressing processes.

Techniques used to finish and dress footwear.

The purposes and uses of the consumables used in finishing and dressing processes.

Techniques to finish footwear by hand and when to use a particular technique.

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identify and solve problems to make appropriate settings to continue work.

UNIT STANDARD CCFO ORGANISING

Organise and manage oneself and ones activities to prepare consumables, machines and tools for work processes.

UNIT STANDARD CCFO COMMUNICATING

Communicate effectively determining content of appropriate work instructions.

UNIT STANDARD CCFO SCIENCE

Use science and technology to select techniques for performing processes by machine and by hand.

UNIT STANDARD CCFO DEMONSTRATING

Demonstrate the understanding of the impact of the process on another as it applies to footwear manufacturing.

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	22210	National Certificate: Footwear Processes	Level 2	NQF Level 02	Passed the End Date - Status was "Reregistered"	2012-06-30	FPMSETA

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE