SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Repair and service small gas appliances

SAQA US ID	UNIT STANDARD TITLE
113859	Repair and service small gas appliances
ORIGINATOR
SGB Electrical Engineering & Construction
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 12 - Physical Planning and Construction			Electrical Infrastructure Construction
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 2	NQF Level 02	4
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2018-07-01	2023-06-30	SAQA 06120/18
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2024-06-30		2027-06-30

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

This unit standard is for persons in the Electrical Engineering; Generation; Distribution; Transmission, Construction and Renewable Energy Sector.

A person credited with this unit standard will be capable of:

Fault find, test and repair gas appliances.

This unit standard will contribute to the full development of the learner within the electrical engineering and construction environment by providing recognition, further mobility and transportability within the field of Physical Planning and Construction. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the electrical engineering and construction environment.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

Safety precautions when working on gas appliances

OSH Act

UNIT STANDARD RANGE

Repairing small gas appliances, stoves, cookers, heaters and geysers. Repairs are done in accordance with manufacturer`s manual.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Plan to do fault finding and repair to small gas appliances.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Appropriate manuals and specifications for the appliance to be worked on are selected.

ASSESSMENT CRITERION 2

2. Manuals and specifications are interpreted according to specified task.

ASSESSMENT CRITERION 3

3. Component function is interpreted according to manufacturer`s specifications.

ASSESSMENT CRITERION 4

4. Tools and test instruments to be used are selected according to specified task.

SPECIFIC OUTCOME 2

Conduct fault finding and testing of small gas appliances.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Appliance are inspected for visible damages according to safety inspection sheets.

ASSESSMENT CRITERION 2

2. Appliances are tested in correct sequence as per fault finding procedures.

ASSESSMENT CRITERION 3

3. Faults are located and corrective action identified with the aid of manuals and specifications.

ASSESSMENT CRITERION 4

4. Faults, wear and tear are identified according to work site procedures.

SPECIFIC OUTCOME 3

Repair small gas appliances.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Appropriate tools are used to remove faulty components.

ASSESSMENT CRITERION 2

2. Components are selected and replaced according to manufacturer`s specifications.

ASSESSMENT CRITERION 3

3. Appliances are checked for correct assembly according to maintenance procedures.

ASSESSMENT CRITERION 4

4. Safety precautions are adhered to according to safe work procedures.

SPECIFIC OUTCOME 4

Conclude small gas appliance repair.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

1. Each gas connection and seal is checked for leaks as per safe work procedures.

ASSESSMENT CRITERION 2

2. Repaired appliance is tested for correct operation according to manufacturer`s specifications.

ASSESSMENT CRITERION 3

3. Appliance is cleaned before approving it for service.

ASSESSMENT CRITERION 4

4. Tools and test instruments are cleaned and stored according to statutory requirements.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

Any provider offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA.

Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

Knowledge that will help me understand and that I will be able to explain:

Types of appliances

Names, locations and functions of appropriate tools

Safety related to each tool

Care and storage of tools

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identify and solve problems (identification of defects and faults).

UNIT STANDARD CCFO WORKING

Work effectively with others (during testing of small gas appliances).

UNIT STANDARD CCFO ORGANISING

Organize and manage oneself (fault finding and identification).

UNIT STANDARD CCFO COLLECTING

Collect, analyse, organise and critically evaluate information (during repairs).

UNIT STANDARD CCFO COMMUNICATING

Communicate (reporting of defects).

UNIT STANDARD CCFO SCIENCE

Use science and technology (environmental and personal safety).

UNIT STANDARD CCFO DEMONSTRATING

Understand the world as a set of related systems.

UNIT STANDARD ASSESSOR CRITERIA

N/A

REREGISTRATION HISTORY

As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015.

UNIT STANDARD NOTES

Supplementary Information

Specified Requirements

Specified requirements include legal and legislative specific requirements and are contained in one or more of the following documents:

Manufacturer`s manuals

Manufacturer`s safety procedures

OSH Act

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	73313	National Certificate: Electrical Engineering	Level 2	NQF Level 02	Passed the End Date - Status was "Reregistered"	2023-06-30	As per Learning Programmes recorded against this Qual
Elective	48473	National Certificate: Electrical Engineering	Level 2	NQF Level 02	Passed the End Date - Status was "Reregistered"	2009-02-18	Was EWSETA until Last Date for Achievement

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

1.	4 TOPS ACADEMY
2.	Better Best Agri Development
3.	Double ST Training and Skills Development
4.	ESKOM GENERATION - PALMIET PUMP STORAGE GRABOUW
5.	Goitsebasadi Construction Project
6.	KP ACADEMY (PTY) LTD
7.	Motheo TVET College
8.	MSC ARTISAN ACADEMY
9.	PCD College cc
10.	POWER SYSTEMS TRAINING, CAPE TOWN
11.	Protech Training (Pty) Ltd
12.	Umfolozi FET College