SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Mould a frozen dairy ice cream or ice cream related product 
SAQA US ID UNIT STANDARD TITLE
123304  Mould a frozen dairy ice cream or ice cream related product 
ORIGINATOR
SGB Food Manufacturing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  7 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
9151  Mould a frozen dairy ice cream or ice cream related product  Level 3  NQF Level 03  7   

PURPOSE OF THE UNIT STANDARD 
This unit standard is for anyone who has to mould a frozen dairy ice cream or ice cream related product.

A person credited with this unit standard is able to:
  • Demonstrate an understanding of moulding frozen dairy ice cream or ice cream related products.
  • Prepare for moulding a frozen dairy ice cream or ice cream related product.
  • Mould a frozen dairy ice cream or ice cream related product.
  • Perform end of moulding procedures.

    This unit standard will contribute to the full development of the learner within the dairy manufacturing environment by providing recognition, further mobility and transportability within the field of manufacturing and assembly. The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the dairy manufacturing and processing environment. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Description of required skills:
  • Communication at NQF Level 2.
  • Mathematical literacy at NQF Level 1.
  • Cleaning procedures, handling of equipment and chemicals.
  • Representative sampling for quality control purposes. 
    		•

    UNIT STANDARD RANGE 
    The context of this unit standard includes dairy ice cream, frozen desserts and ice cream. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate an understanding of moulding frozen dairy ice cream or ice cream related products. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The purpose of moulding frozen dairy ice cream or ice cream related products is explained according to standard dairy and packaging principles. 

    ASSESSMENT CRITERION 2 
    The steps in the moulding process for frozen dairy ice cream or ice cream related products are identified and described according to standard operating procedures and within the specific context of the learners work environment. 

    ASSESSMENT CRITERION 3 
    The operating principles of the equipment used for moulding are explained according to standard food principles. 

    ASSESSMENT CRITERION 4 
    The components of the equipment used for moulding are identified and the function of each is explained according to standard food principles. 

    SPECIFIC OUTCOME 2 
    Prepare for moulding a frozen dairy ice cream or ice cream related product. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The production plan is obtained and interpreted according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    Personal preparation is done according to standard operating procedures. 
    ASSESSMENT CRITERION RANGE 
    Preparations include:
  • Hygiene practices.
  • Wearing of protective clothing and safety gear.
     
    		•

    ASSESSMENT CRITERION 3 
    The equipment and work area are prepared according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Product to be moulded is obtained and checked according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    The relevant parameters are set according to standard operating procedures and site specifications. 

    ASSESSMENT CRITERION 6 
    The reasons for specific values of the different parameters are explained according to standard dairy principles and the manufacturer's specifications. 

    ASSESSMENT CRITERION 7 
    The moulding equipment is started up according to standard operating procedures. 

    ASSESSMENT CRITERION 8 
    Problems during start up are solved within scope of work. 

    SPECIFIC OUTCOME 3 
    Mould a frozen dairy ice cream or ice cream related product. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The moulding equipment is operated and controlled according to standard operating procedures and safety requirements. 

    ASSESSMENT CRITERION 2 
    The product is moulded according to standard operating procedures and safety requirements. 

    ASSESSMENT CRITERION 3 
    Parameters during moulding are monitored and controlled according to standard operating procedures. 

    ASSESSMENT CRITERION 4 
    Samples are taken and are sent for analysis according to standard operating procedures. 

    ASSESSMENT CRITERION 5 
    Results of sample analysis are interpreted and a conclusion is drawn on the product's conformance to legal and site specifications. 

    ASSESSMENT CRITERION 6 
    The final product conforms to legal requirements and site-specifications. 

    ASSESSMENT CRITERION 7 
    Sub-standard products are handled according to standard operating procedures. 

    ASSESSMENT CRITERION 8 
    Where moulding equipment is operated simultaneously with other production processes, the moulding process is synchronized according to standard operating procedures. 

    ASSESSMENT CRITERION 9 
    Problems are solved within scope of work. 

    SPECIFIC OUTCOME 4 
    Perform end of moulding procedures. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    A changeover is performed according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    First line maintenance is performed according to standard operating procedures and within scope of work. 
    ASSESSMENT CRITERION RANGE 
    First line maintenance includes:
  • Cleaning and sanitising of equipment and work area.
  • Inspection of equipment.
  • All other maintenance functions as required within the learner's scope of work.
     
    		•

    ASSESSMENT CRITERION 3 
    Records of the moulding process are kept in accordance with standard operating procedures. 

    ASSESSMENT CRITERION 4 
    The equipment is shut down according to standard operating procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor or moderator respectively with the relevant Education and Training Quality Assurance Body (ETQA), or with another ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA, or with another ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA, or by another ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal (provider-based) and external (ETQA-based) moderation of assessment, unless ETQA policies specify otherwise.
  • Assessment and moderation of assessment against this unit standard should encompass achievement of competencies described in the individual unit standard and may encompass achievement of integrated competencies with other unit standard(s).
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Embedded knowledge is reflected within the assessment criteria of each specific outcome. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which response displays that responsible decisions, using critical and creative thinking, have been made by:
  • Identifying and solving problems.

    Evident in specific outcome:
  • Prepare for moulding a frozen dairy ice cream or ice cream related product. 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community by:
  • Synchronising the moulding process with other production processes or actions.

    Evident in specific outcome:
  • Mould a frozen dairy ice cream or ice cream related product. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively by:
  • Preparing for moulding.

    Evident in specific outcome:
  • Prepare for moulding a frozen dairy ice cream or ice cream related product. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information by:
  • Handling sub-standard moulded products according to standard operating procedures.

    Evident in specific outcome:
  • Perform end of moulding procedures. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively by using mathematical and/or language skills in the modes of oral and/or written presentations by:
  • Keeping records.

    Evident in specific outcome:
  • Perform end of moulding procedures. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and health of others by:
  • Working safely.

    Evident in specific outcomes:
  • Prepare for moulding a frozen dairy ice cream or ice cream related product.
  • Mould a frozen dairy ice cream or ice cream related product.
  • Perform end of moulding procedures. 
    		•

    UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full personal development of each learner and the social and economic development of the society at large.

    Evident in specific outcomes:
  • Demonstrate an understanding of moulding frozen dairy ice cream or ice cream related products.
  • Prepare for moulding a frozen dairy ice cream or ice cream related product.
  • Mould a frozen dairy ice cream or ice cream related product.
  • Perform end of moulding procedures. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 9151, "Mould a frozen dairy ice cream or ice cream related product", Level 3, 7 credits.

    Supplementary Information:
  • Legal requirements:

    Where applicable, the following acts, current and future regulations and amendments should be considered:
  • Foodstuffs, Cosmetics and Disinfectants Act, No. 54 of 1972.
  • Health Act, No 63 of 1977.
  • Occupational Health and Safety Act, No. 85 of 1993.
  • Other industry specific Acts.

    Where applicable, the following International and National Standards should be considered:
  • SANS 1049 - Food Hygiene Management.
  • SANS 10330 - Requirements for a HACCP system.
  • ISO 22000 - Food safety management systems - Requirements for organisations throughout the food chain.
  • ISO 9001 - Quality Management System - Requirements.
  • Definition of terms within this unit standard:

    Terminology: Clarification/ explanation/ definition
  • Dairy ice cream: Refers to a frozen product with a minimum of 7% butterfat and 33% total solids, of which at least 20% should consist of milk-based solids not fat.
  • Frozen dairy ice cream or ice cream related products: Refer to the following categories:

    > Frozen dairy ice cream.
    > Frozen ice cream.
    > Frozen desserts.
  • Frozen dessert: Refers to a frozen product that contains less than 7% butterfat or vegetable fat, or less than 7% of a combination of butterfat and vegetable fat. Frozen desserts also include frozen confection, milk ice and sherbets.
  • Ice cream: Refers to a frozen product of which the fat consists only of vegetable fat or a mixture of butterfat and vegetable fat. This product should contain a minimum of 7% vegetable fat (or a mixture of butterfat and vegetable fat) and 33% total solids, of which at least 20% should consist of milk-based solids not fat.
  • Standard operating procedures: Refer to company procedures, prescribed procedures from the manufacturer, personal safety and food safety practices and procedures, good manufacturing practices, best practices, applicable legislation, time frames, recipes and specifications. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  50306   Further Education and Training Certificate: Dairy Manufacturing Technology  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2018-07-26  FOODBEV 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.