SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Install, test and maintain single phase AC/DC machines and control gear 
SAQA US ID UNIT STANDARD TITLE
13141  Install, test and maintain single phase AC/DC machines and control gear 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of mechatronics. The learning outcomes in this unit standard also contribute to the exit level outcomes required for the mechatronics NQF level 3 qualification.

Qualifying learners can install, test and maintain single phase AC/DC machines and control gear in accordance with statutory requirements to distribute and control electricity. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed to be as part of a progression. It is one of a series of unit standards for activities at and above this level. The credits assigned to it are based on the assumption that the learner is learning what is needed for this unit standard as part of his/her learning for a range of related unit standards at this level. 

UNIT STANDARD RANGE 
The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes.
Work will be done under minimal supervision. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Select and install single phase AC/DC machines. 
OUTCOME RANGE 
  • AC/DC machines may include shunt series motors and compound, alternators, induction and universal motors for use in hazardous areas.
  • Statutory requirements include OSHA, SABS 0142, local authority requirements, manufacturers specifications and workplace procedures. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    SPECIFIC OUTCOME 2 
    Test and maintain machines. 
    OUTCOME NOTES 
  • Isolate machine
  • Select and use appropriate test equipment
  • Identify faults
  • Take corrective action to repair faults 
    		•
    OUTCOME RANGE 
  • Test equipment may include multimeters, insulation testers, clip-on ammeters, voltage line testers.
  • Tests may include insulation breakdown, winding continuity, insulation resistance to earth and mechanical tests. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    SPECIFIC OUTCOME 3 
    Install control gear. 
    OUTCOME RANGE 
    Control gear includes direct on line starters, toggle switches, electromagnetic relays and contactors, thermal relays, timers, push-buttons, limit switches, photo-cell switches, 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    SPECIFIC OUTCOME 4 
    Test and maintain control gear. 
    OUTCOME RANGE 
  • Testing of control gear includes continuity testing and resistance testing.
  • Maintaining of control gear includes visual inspections, brushing/dusting, electrical cleaning solvents, safety solvents. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    SPECIFIC OUTCOME 5 
    Connect machine and switch gear. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    SPECIFIC OUTCOME 6 
    Record information on work done. 
    OUTCOME NOTES 
    Document work done and complete test documents 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    SPECIFIC OUTCOME 7 
    Work safely with care for self, fellow workers, machines, equipment, materials and environment. 
    OUTCOME RANGE 
    Safe working practices include the appropriate personal protective equipment and adherence to safety procedures 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Machines and control gear identified and installed correctly in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 2 
    2. Installations are working. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 3 
    3. Machines and control gear maintained to specifications. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•

    ASSESSMENT CRITERION 4 
    4. Connection of machines and control gear done in accordance to procedure. 
    ASSESSMENT CRITERION NOTES 
    Indicators:

    1. Appropriate lockout procedures are adhered to
    2. Correct machines are identified and selected
    3. Relevant control gear is identified and selected
    4. Connections are made in accordance to SABS 0142 and workplace procedures
    5. Test equipment is used correctly
    6. Tests are carried out in accordance with procedures
    7. Appropriate tools are used to meet the job requirements
    8. Relevant test documents are generated
    9. Safe working practices are adhered to
    10. Cleaning solvents are selected, used and disposed of correctly
    11. Problems are reported timeously to appropriate personnel
    12. A clean and tidy work environment is maintained

    Understanding confirmed:

    Respond to 'what if' and 'why' questions covering:
  • The principles of induction
  • The basic principles of single phase AC/DC machines and control gear
  • Test procedures
  • Electrical installation regulations
  • Electrical safety
  • The principle of controlling electricity

    Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 
    		•


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. The assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    The learner can be assessed in the language of his/her choice although s/he has to report incidents or conditions to someone else. The learner will be assessed on his/her ability to report in the language commonly used in his/her working environment.

    The learner will be assessed in the workplace but s/he can submit documents, projects, test results and assignments that were not produced in the workplace.

    The learner can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a
    qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Single phase AC/DC machines
  • Control gear
  • Electrical test equipment
  • Cleaning solvents

    Attributes, descriptions, characteristics & properties:
  • Control gear components
  • Safety equipment
  • Test equipment
  • Mechanical testing
  • Electrical testing
  • Single phase AC/DC machines

    Sensory cues:
  • Use of senses to detect faulty components

    Purpose of:
  • Control gear
  • Single phase AC/DC machines
  • Testing
  • Cleaning switch gear
  • Applying SABS 0142 regulations
  • Applying electrical safety

    Processes, events, causes and effects, implications:
  • Causes of damage and injury
  • Implications of incorrect testing applications
  • Implication of not applying electrical safety
  • Implications of not apply SABS 0142 regulations
  • Implications of not wearing protective clothing when cleaning switch gear
  • Implications mechanical wear
  • Implications of not following installation and maintenance procedures

    Procedures and techniques:
  • Maintenance procedures
  • Installation procedures
  • Test procedures
  • Connection procedures

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation and standards
  • SABS 0142 regulations


    Theory: rules, principles, laws:
  • Principles of electricity
  • Control principles
  • Inductive laws

    Relationships, systems:
  • Relationship between testing and faultfinding
  • Relationship between testing and electrical safety
  • Relationship between electrical installations and control systems 
    		•


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise situations that require corrective action 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • Contribute to workgroup efforts to maintain cleanliness, safety and quality
  • Contribute to working in groups to determine a solution to an identified problem 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Apply correct procedures for using, storing and caring for test equipment, tools, electrical diagrams and components 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Use common names for electrical components
  • Use common names for test equipment
  • Use common names for electrical circuits
  • Fill in the necessary fault reports and material requisition forms 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Apply the principles of electricity 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Relate the installation of electrical circuits to other electrical applications 
    		•

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  67609   National Certificate: Mechatronics  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Core  22771   National Certificate: Mechatronics  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2009-07-29  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.