SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Assemble and join component parts 
SAQA US ID UNIT STANDARD TITLE
243692  Assemble and join component parts 
ORIGINATOR
SGB Clothing, Textiles, Footwear and Leather 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  36 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is specifically for learners in the Footwear and General Goods Manufacturing formal sector working in, or who wish to work in the Sewing department of a relevant factory. Learners assessed as competent against this standard will be capable of:
  • Identifying all necessary operations to assemble and join cut component parts.
  • Selecting machinery, equipment and consumables to assemble and join cut parts.
  • Performing hand, basic machine and specialised machine operations to assemble and join cut component parts. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Learners are required to demonstrate fundamental competencies, specified below, at ABET Level 4 or NQF 1. 

    UNIT STANDARD RANGE 
    This Unit Standard is applicable to manufacturing processes within the Footwear and General Goods sectors.

    Operations may include, but are not limited to:
  • Processing of leather component parts by hand or machine.
  • Processing of synthetic material component parts.
  • Processing of textile component parts.
  • Processing of board parts.
  • Processing of reinforcements.

    The standard covers the joining of the component parts of, but not limited to, the following basic products:
  • Leather and synthetic footwear of differing types.
  • Handbags, carrier bags.
  • Belts.
  • Hats.
  • Luggage.
  • Wallets and purses.
  • Satchels.
  • Upholstery. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Identify all operations that are necessary to assemble and join cut component parts. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The component parts of a selected item that are to be joined are identified and listed in terms of the design specification requirements. 

    ASSESSMENT CRITERION 2 
    All relevant operations required to assemble and join cut component parts are listed and described in terms of standard operating procedures. 

    SPECIFIC OUTCOME 2 
    Identify and select machinery, equipment and conIdsumables used to assemble and join cut component parts. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Machinery, equipment and consumables used to assemble and join cut component parts are listed and described in terms of relevant specification requirements. 

    ASSESSMENT CRITERION 2 
    The purpose of identified machinery and equipment for assembling and joining component parts is listed and described in terms of machinery manufacturer specifications. 

    SPECIFIC OUTCOME 3 
    Prepare consumables, machinery and equipment to assemble and join cut component parts. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Specified consumables and component parts are prepared for production process according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    Selected machinery for processing specific components is set up in accordance with manufacturers specifications and standard operating procedures. 

    ASSESSMENT CRITERION 3 
    Ancillary tools and equipment are prepared for production processes as required in terms of job specifications. 

    SPECIFIC OUTCOME 4 
    Perform hand, basic machine and specialised machine operations to assemble and join cut component parts. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Hand and machine operations to assemble and join cut component parts are selected and performed, in compliance with the requirements of the work ticket. 

    ASSESSMENT CRITERION 2 
    Conformance of performed operations to standard operating procedures and quality standards is verified in terms of customer specification requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed (including RPL) against this Unit Standard may apply to an assessment agency, assessor or provider institution accredited by the relevant ETQA, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Unit Standard or assessing this Unit Standard must be accredited as a provider with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Learning programmes that will enable the achievement of this unit standard will be accredited by the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the ETQA.
  • Assessors who assess the competency of learners against this standard must be qualified and registered with the appropriate ETQA.
  • Moderators qualified and registered with the appropriate ETQA must conduct moderation. All external moderation will be conducted at the discretion of the relative ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Learners will engage with the following knowledge components:
  • The names, functions and parts of various machines and equipment used in assembling and joining cut component parts.
  • Material, machinery and equipment specifications.
  • The selection of materials, components, consumables and grindery to conform with the requirements of the work ticket.
  • The setting up and adjusting of machines and equipment.
  • Machine and equipment maintenance requirements including routine maintenance checks.
  • Quality requirements.
  • Techniques used for producing uppers from cut parts.
  • The purposes and uses of the materials and consumables used in assembling and joining cut component parts.
  • Techniques to perform hand operations in upper closing processes.
  • Work instructions and standard operating procedures applicable to closing processes
  • Relevant health, safety and environmental policies and procedures. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems relating to the assembling and joining of cut component parts. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others to achieve output and quality targets. 

    UNIT STANDARD CCFO ORGANISING 
  • Organise, analyse and evaluate information relating to materials, machinery, construction and product types.
  • Organise the activities of oneself relative to others in a working environment in order to meet output deadlines and production targets. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively when identifying materials and equipment to be used and cut component parts to be assembled and joined. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology to calculate and issue material quantities and measure productivity. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Understand the world of work as part of related systems in the assembling and joining of component parts. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  58227   National Certificate: Clothing, Textile, Footwear and Leather Manufacturing Processes  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. 1 Classie Africa 
    2. A Z COMMUNITY SERVICES 
    3. ACADEMY OF TRAINING & DEVELOPMENT PTY LTD 
    4. African Apex Apparel (Pty) Ltd 
    5. AMOS / KGAPHAMADI COMMUNITY ORGANISATION 
    6. ARANDA LEARNERSHIP COLLEGE PTY LTD 
    7. Arden School of Management (Pty) Ltd 
    8. Associated Spinners Pty Ltd 
    9. ASSURED VOCATIONAL SKILLS INSTITUTE PTY LTD 
    10. Bader Sa Proprietary Limited 
    11. Bright Idea Projects 179 cc 
    12. CAPE TOWN WORKBASED LEARNING ACADEMY 
    13. Crossley Holdings (Pty) Ltd 
    14. DANO TEXTILE INDUSTRIES1 
    15. Deneb Investments Ltd 
    16. Dlamini The Siba PTY LTD 
    17. Durban Overall PTY LTD 
    18. EKURHULENI ARTISANS & SKILLS TRAINING CENTRE PTY LTD 
    19. FUTURE DISCOVERY TRAINING ACADEMY 
    20. GLICAM TRADING ENTERPRISE 
    21. HELPERS FOR LIFE NPC 
    22. HERMANUS CLOTHING MANUFACTURING PTY LTD 
    23. Inter-Coastal Business & Property Services cc 
    24. INTUTHUKO YESIZWE COMMUNITY ORGANISATION NPO 
    25. INYAPA VHUSIKU CONSULTING PTY LTD 
    26. ITHEMBA LOMPHAKATHI COMMUNITY ORGANISATION 
    27. Kelmik Training Centre (Pty) Ltd 
    28. LERIBE TRAINING SOLUTIONS 
    29. MALITINNE PTY LTD 
    30. MASTER PATTERNS BY RONA 
    31. Mnambithi TVET College 
    32. NDIMASE TRADING 
    33. NDIPHA FASHION DESIGNS 
    34. Ntunzela Trading Enterprise 
    35. PERENNIAL SERVICES PTY LTD 
    36. PHD PROJECTS SA PTY LTD 
    37. PINUS TECH TECHNOLOGIES TRADING AND PROJECTS 
    38. POLOKWANE SCHOOL OF FASHION AND DESIGN 
    39. Salabedla Contracting and Trading (Pty) Ltd 
    40. SALABEDLA CONTRACTING AND TRADING PTY LTD 
    41. SINOVUYOLETHU TRADING PTY LTD 
    42. SOUTH AFRICAN FASHION DESIGNER AGENCY CC 
    43. THANDEKA VOCATIOL EDUCATION TRUST PTY LTD 
    44. The Brokers Learning Centre 
    45. THE FINISHING COLLEGE PTY LTD 
    46. THUBELIHLE GRADUATE INSTITUTE 
    47. Trade Call Investments Apparel (Pty) LTD 
    48. Trade Call Investments Apparel (Pty) Ltd (Mobeni) 
    49. TRADE CALL INVESTMENTS PTY LTD 
    50. TRUE REFLECTIONS TRAINING AND DEVELOPMENT PTY LTD 
    51. UMBUSO TRAINING SERVICES 
    52. VCK TRAINING AND TECHNICAL SERVICES PTY LTD 
    53. VEB CELE & ASSOCIATES PTY LTD 
    54. Vijay Bhagwan Consultancy and Solutions cc 
    55. VPK BUSINESS VENTURE C C 
    56. ZA GEAR 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.