SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Dismantle automotive main components 
SAQA US ID UNIT STANDARD TITLE
244053  Dismantle automotive main components 
ORIGINATOR
SGB Vehicle Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
People in the field of manufacturing and engineering require the skills, values and knowledge reflected in this unit standard. The learning outcomes in this unit standard also contribute to the exit level outcomes required for various manufacturing and engineering qualifications. The learner is capable of dismantling automotive main components for inspection or repairs. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
It is assumed that learners are competent in:
  • Communication and Mathematical Literacy at NQF Level 2.
  • The usage of engineering hand tools, power tools, workshop equipment, and measuring equipment.
  • The usage of automobile lifting equipment. 
    		•

    UNIT STANDARD RANGE 
    The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.

    All work is performed with little or no supervision in accordance with operational, repair manual specifications and procedures and in compliance with occupational safety, health and environmental legislation. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan and prepare work area and component dismantling task. 
    OUTCOME RANGE 
  • Planning includes reading and interpreting the job card/work instructions and obtaining service data.
  • Preparing includes selecting appropriate tools and equipment and cleaning component prior to dismantling.
  • Appropriate tools and equipment means industry approved tools and equipment as being most suited to complete the task to a professional and competent manner with due regard to safe working practices. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Tools and equipment are selected appropriate to the task required. 

    ASSESSMENT CRITERION 2 
    Relevant service data is obtained in accordance with component make and model. 

    ASSESSMENT CRITERION 3 
    Component is cleaned according to company procedures. 

    ASSESSMENT CRITERION 4 
    Component is prepared for dismantling in accordance with workshop manual procedures. 

    ASSESSMENT CRITERION 5 
    The consequences of not adequately preparing are explained in terms of the potential safety hazard and lost production. 

    SPECIFIC OUTCOME 2 
    Dismantle components. 
    OUTCOME RANGE 
    Components include transmissions, axles, engines, differentials, torque converters. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The component is dismantled according to workshop manual procedures. 

    ASSESSMENT CRITERION 2 
    Work is conducted in accordance with all workshop manual safety warnings and required actions before, during and after component dismantling task. 

    ASSESSMENT CRITERION 3 
    Dismantled parts are packed out in accordance with workplace requirements. 

    ASSESSMENT CRITERION 4 
    The component, equipment and tools are treated with the necessary care and are not damaged. 

    ASSESSMENT CRITERION 5 
    The reasons for following a specific dismantling procedure are explained. The consequences of not following the procedure are explained in terms of the impact on the process and potential damages. 

    SPECIFIC OUTCOME 3 
    Prepare component parts for storage. 
    OUTCOME RANGE 
    Preparation of component parts for storage includes cleaning of parts, rust prevention, tagging, plastic wrapping, and packing of parts in a container/basket or onto a rack and storing of parts in a designated place. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Component parts are cleaned and treated for rust prevention in accordance with manufacturer specifications. 

    ASSESSMENT CRITERION 2 
    Component parts are marked and protected for storage in accordance with workplace requirements. 

    ASSESSMENT CRITERION 3 
    Component parts are stored in designated place until needed for use in accordance with workplace procedures. 

    ASSESSMENT CRITERION 4 
    The reasons for preparing parts for storage are explained in terms of the prevention of damage to the parts and availability when required. 

    SPECIFIC OUTCOME 4 
    Apply safety procedures during component removal task. 
    OUTCOME RANGE 
  • Safety includes using personal protective equipment, adhering to workshop manual warnings and dispose of hazardous materials.
  • Hazardous materials include oils, coolant, fuels and cleaning agents. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The component is dismantled without incident, accident, injury or damage to component, vehicle, equipment and tools. 

    ASSESSMENT CRITERION 2 
    All workshop manual safety warnings and required actions before, during and after vehicle component dismantling task are adhered to. 

    ASSESSMENT CRITERION 3 
    Applicable SHE procedures are followed during the vehicle component removal task. 

    SPECIFIC OUTCOME 5 
    Restore work area, complete and process documentation. 
    OUTCOME RANGE 
  • Restoring work area includes disposal of hazardous materials, tools and equipment packed away, work area cleaned.
  • Documentation includes completing job cards, check lists and reports.
  • Reports include reports and summaries of work completed.
  • Process includes submissions according to company procedures. 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The work area is restored in accordance with workplace and SHE requirements. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are cleaned and stored in accordance with workplace and SHE requirements. 

    ASSESSMENT CRITERION 3 
    Consequences of not leaving the workplace in the appropriate state are explained in terms of safety hazards and production. 

    ASSESSMENT CRITERION 4 
    Documentation is completed and processed in accordance with workplace procedures. 

    ASSESSMENT CRITERION 5 
    The reasons for the various documentation are explained in terms of their main functions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the Unit Standard.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names and functions of:
  • Main components.
  • Tools and equipment.

    Attributes, descriptions, characteristics and properties:
  • Ferrous and non-ferrous metals.

    Sensory cues:
  • Visual, audible, feel.

    Purpose of:
  • Dismantling components.
  • Adhering to workshop manual procedure.
  • Cleaning component prior to dismantling.
  • Preparing component parts for storage.

    Regulations, legislation, agreements, policies, standards:
  • Applicable company policies and procedures.
  • Workshop manual procedures.
  • SHE procedures.
  • Quality procedures.

    Theory: rules, principles, laws:
  • Basic principles of ferrous and non-ferrous metals.

    Relationships, systems:
  • Interaction of component parts in relation to the assembled component. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Related to dismantling automotive components. 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • When Interact with team members and colleagues during the planning, preparation, and dismantling phases of the task. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage my activities and myself:
  • When working in accordance with service and flat rate schedules.
  • When managing resources and my time. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • When completing and processing documentation and service reports. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • When using special service tools and equipment.
  • When using information technology. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • When I can explain and justify my actions and procedures followed.
  • When I can explain the basic interaction of component parts in relation to the operation of the assembled component. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  78524   National Certificate: Automotive Repair and Maintenance  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  58497   National Certificate: Automotive Repair and Maintenance  Level 3  NQF Level 03  Passed the End Date -
    Status was "Registered"     		 2009-02-18  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.