SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Achieve and maintain mining excavation stability with support installation in shafts 
SAQA US ID UNIT STANDARD TITLE
253027  Achieve and maintain mining excavation stability with support installation in shafts 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
9809  Achieve and maintain mining excavation stability with support installation in a vertical shaft  Level 2  NQF Level 02   
9810  Achieve and maintain mining excavation stability with support installation in an incline or decline shaft  Level 2  NQF Level 02   

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are responsible for ensuring excavation stability in a vertical, incline or a decline shaft.

People credited with this unit standard are able to:
  • Demonstrate knowledge of support installation to achieve excavation stability.
  • Prepare for support installation.
  • Install support.
  • Conduct a post-installation procedure.

    The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and contribute to the upliftment and economic growth of the mining and minerals sector.

    This unit standard is intended to promote general skills, knowledge to achieve and maintain excavation stability with support installation in a vertical, incline or decline shaft in the mining and minerals sector in order to ensure knowledgeable and informed workers. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit calculation is based on the assumption that learners are already competent in the following:
  • Outcomes relating to National Introductory Certificate to Mining and Minerals (NQF Level 1).
  • Communication skills at NQF Level 1.
  • Knowledge of strata (identification of strata) at NQF Level 1.
  • Use relevant tools and measuring instruments at NQF Level 1. 

  • UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the unit standard, where they apply to particular specific outcomes or assessment criteria.

    At least one or both of the following ranges of shafts must be selected:
  • Vertical shafts.
  • Incline or decline shafts.

    The learner must do all the generic ranges within the unit standard. The learner must also do at least one or both the ranges applicable to vertical or incline and decline shafts where specified within particular assessment criteria. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of support installation to achieve excavation stability. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Procedures outlining entry and watering down are explained in terms of legal and operational requirements. 

    ASSESSMENT CRITERION 2 
    Adverse conditions are explained in terms of the means for recognition and actions for correction. 
    ASSESSMENT CRITERION RANGE 
  • Heat.
  • Dust.
  • Ventilation.
  • Ground conditions.
  • Harmful gases.
     

  • ASSESSMENT CRITERION 3 
    The density and installation of the specified support is explained in terms of legal and operational requirements. 

    ASSESSMENT CRITERION 4 
    The purpose of the support installation is explained in terms of ensuring a safe production environment. 
    ASSESSMENT CRITERION RANGE 
    Vertical shafts must include:
  • Purpose of support used in vertical shafts.
  • Support methods and support types typically used in vertical shafts.

    Incline and decline shafts must include:
  • Purpose of support used in incline and decline shafts.
  • Support methods and support types typically used in incline and decline shafts.
     

  • ASSESSMENT CRITERION 5 
    The requirements pertaining to the cleaning and preparation of the footwall in the context of installing support in shafts. 
    ASSESSMENT CRITERION RANGE 
    Vertical shafts must include:
  • Shaft bottom.
  • Station footwall.

    Incline and decline shafts must include:
  • Bottom of decline shaft.
  • Face of incline shaft.
  • Station footwalls.
     

  • SPECIFIC OUTCOME 2 
    Prepare for support installation. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The required personal protective equipment is selected, examined and used in a way that is consistent with its purpose, design and operational requirements. 

    ASSESSMENT CRITERION 2 
    All tools, material and equipment required for support installation are selected, examined and ensured to be ready for use according to purpose, design and operational requirements. 

    ASSESSMENT CRITERION 3 
    Tools, material and equipment is transported in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 4 
    The work place is examined for substandard conditions and hazards in accordance with the relevant procedure. 

    ASSESSMENT CRITERION 5 
    Substandard conditions and hazards are dealt with in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 6 
    The consequences of inadequate preparation to install support are described in terms of the potential effect on safety, health, equipment and production. 

    SPECIFIC OUTCOME 3 
    Install support. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The temporary support positions are marked off in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 2 
    The installation procedure for temporary support is conducted in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 3 
    The permanent support positions are marked off in accordance with operational requirements. 

    ASSESSMENT CRITERION 4 
    The installation of the permanent support is conducted according to legal and operational requirements. 

    ASSESSMENT CRITERION 5 
    The consequences of inadequate support installation are described in terms of the potential effect on safety, health, equipment and production. 

    SPECIFIC OUTCOME 4 
    Conduct a post installation procedure. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Quality control inspections are performed according to operational requirements. 
    ASSESSMENT CRITERION RANGE 
  • Quality and monitoring of installation.
  • Spacing of support units.
  • Support failure.
  • Effectiveness or ineffectiveness.
  • Replacement of damaged units.

    Vertical shafts must include:
  • Suitability of units installed in vertical shaft.

    Incline and decline shafts must include:
  • Suitability of units installed in incline or decline shafts.
     

  • ASSESSMENT CRITERION 2 
    Quality control and identification of anomalous adverse ground conditions are explained in terms of potential hazards. 
    ASSESSMENT CRITERION RANGE 
  • Excessive closure or closure rate.
  • Sudden closure.
  • Back break.
  • Open fractures or joints.
  • Excessive bed separation.
  • Relative rock displacements.
  • Loosening.
  • Premature support unit failure.
  • Excessive sidewalls of shaft wall failures.
     

  • ASSESSMENT CRITERION 3 
    Defective tools and equipment are dealt with in accordance with legal and operational requirements. 

    ASSESSMENT CRITERION 4 
    Good housekeeping is practiced according to the relevant procedures. 

    ASSESSMENT CRITERION 5 
    The consequences of deviating from specific requirements are described in terms of the potential effect on safety, health, equipment and production. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Knowledge relating to the support requirements to maintain excavation stability.
  • Being able to measure and record support installations.
  • Occupational Health, Safety and Environmental issues:
    > Safe working practices.
  • Applicable statutory requirements:
    > Codes of practice.
  • Communication:
    > Reporting requirements and ability.
    > Communicating with relevant personnel.
    > Liaison with associated operations and personnel. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.

    Note:
  • The ability and willingness of the learner to work together as a team, ensuring the excavation stability by installing support as an essential responsibility towards the team's safety. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.

    Note:

    The ability of the learner to take support measurements on a regular and scheduled basis demonstrates a responsibility towards the safety of the mining operation. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note:
  • The ability of the learner to record and report support installations. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.

    Note:
  • The appropriate communication with other personnel with regard to the need for support installation to ensure excavation stability. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.

    Note:
  • The learner demonstrates and understanding of and ability to use advanced mining technology in terms of production, safety and communicatio. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note:
  • The learner demonstrates understanding that various systems contribute to the overall safety and productivity of an underground working environment, and that it is as important to contribute to the efficiency of those systems as to be supported by them, particularly by means of following relevant procedures diligently. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces the folllowing unit standards:
  • ID: 9809, "Achieve and maintain mining excavation stability with support installation in a vertical shaft", Level 2, 3 credits.
  • ID: 9810, "Achieve and maintain mining excavation stability with support installation in an incline", Level 2, 3 credits.

    Terminology:

    Specified Requirements:

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act and Regulations, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other relevant Standards.
  • Chief Inspector of Mines' Directives.
  • Guidelines issued by the Chief Inspector of Mines.

    Site-Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH&S Risks.
  • Working Guides.
  • Equipment and Materials Specifications.

    Unit Standard Justification

    Level: 2

    Attribute; Level; Justification:
  • Skills; Level 2; Moderate in range.
  • Procedures; Level 3; Significant choice.
  • Context; Level 3; Range of familiar.
  • Knowledge; Level 2; Basic operational.
  • Information processing; Level 1; Recall.
  • Problem Solving; Level 2; Known solutions to familiar problems.
  • Orientation of activities; Level 1; Directed.
  • Application of responsibility; Level 2; Some responsibility for quantity and quality, and possible responsibility for guiding others.
  • Orientation of scope of responsibility; Level 3; Under general supervision quality checking.

    Average Level: = 2.11.
    Actual Level Assigned: = 2.

    Credits:

    Total hours required by the learner to achieve the required outcome:

    Activity; Hours:
  • Classroom Teaching; 22 Hours.
  • On-The-Job Training; 16 Hours.
  • Mentoring required; 0 Hours.
  • Other (Specify); 0 Hours.

    Total = 38 Hours.

    Credits Achieved: = 38/10 = 3.8.
    Credits Assigned: = 4. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  64909   National Certificate: Small Scale Mining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 
    Elective  59549   National Certificate: Strata Control Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ADCORP TECHNICAL TRAINING (PTY) LTD 
    2. MINTEK 
    3. PALABORA COPPER (PTY) LTD 
    4. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 
    5. SIYANDA BAKGATLA PLATINUM MINE 
    6. XTRACT TRAINING SERVICES (SA)(PTY)LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.