SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Mine fine granular material by means of hydraulic monitoring 
SAQA US ID UNIT STANDARD TITLE
256699  Mine fine granular material by means of hydraulic monitoring 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  7 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
9736  Mine fine granular material by means of hydraulic monitoring  Level 3  NQF Level 03  7   

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are responsible for mining fine granular material by using a high pressure water cannon (monitoring gun).

People credited with this unit standard are able to:
  • Demonstrate knowledge relating to the hydraulic mining of fine granular material.
  • Prepare to mine fine granular material.
  • Mine fine granular material by means of a high-pressure water cannon (monitoring gun).
  • Complete duties pertaining to the hydraulic mining operation. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical literacy at NQF Level 2. 
    		•

    UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge relating to the hydraulic mining of fine granular material. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The requirements pertaining to a safe, healthy work environment in the hydraulic mining of fine material and the consequences of not adhering to the above are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 2 
    The importance of the hydraulic mining is explained in terms of achieving production requirements. 

    ASSESSMENT CRITERION 3 
    Hazards and associated risks pertaining to the mining process are identified through relevant risk assessment procedures. 

    ASSESSMENT CRITERION 4 
    The actions to be taken should hazards and risks be encountered are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 5 
    The mining method and process control are explained in accordance with operational requirements. 

    ASSESSMENT CRITERION 6 
    The principal components and the specifications of the hydraulic mining system are identified and their functions explained in term of operational requirements. 
    ASSESSMENT CRITERION RANGE 
    Principal components must include:
  • Pump stations.
  • Monitor guns.
  • Valves.
  • Pipelines.
  • Drainage pipes.
  • Safety devices.
  • Launders.
  • Screens.
  • Strainer boxes.
  • Clamps.
  • Auxiliaries.
     
    		•

    ASSESSMENT CRITERION 7 
    The communication requirements pertaining to the mining operation and the consequences of non-compliance are explained in terms of operational requirements. 

    ASSESSMENT CRITERION 8 
    The actions to be taken, should sub-standard conditions and problems be encountered, are explained in terms of operational requirements. 

    SPECIFIC OUTCOME 2 
    Prepare to mine fine granular material. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Personal protective and safety equipment is verified, examined and used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are verified and examined in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Workplace hazards and associated risks are dealt with in accordance with recommendations set out in the applicable risk assessment. 

    ASSESSMENT CRITERION 4 
    The mining area is examined and substandard conditions are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 5 
    The pipelines and monitoring gun are positioned and secured in accordance with standard task procedures. 

    ASSESSMENT CRITERION 6 
    Occupational safety and health procedures towards self and others are maintained in accordance with specified requirements. 

    SPECIFIC OUTCOME 3 
    Mine fine granular material by means of a high-pressure water cannon. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Personal protective and safety equipment is used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are used in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Work related hazards and associated risks are dealt with in accordance with recommendations set out in the applicable risk assessment. 

    ASSESSMENT CRITERION 4 
    The hydraulic mining process is started and controlled in accordance with standard task procedures. 

    ASSESSMENT CRITERION 5 
    The flow of slurry to the pump station is monitored and controlled in accordance with standard task procedures. 

    ASSESSMENT CRITERION 6 
    Unwanted material is removed in accordance with standard task procedures. 

    ASSESSMENT CRITERION 7 
    Problems encountered are dealt with or explained in accordance with operational requirements. 

    ASSESSMENT CRITERION 8 
    The hydraulic mining process is conducted consistently with environmental policy and other legislation. 

    ASSESSMENT CRITERION 9 
    Occupational safety and health procedures towards self and others are maintained in accordance with specified requirements. 

    SPECIFIC OUTCOME 4 
    Complete the duties pertaining to the hydraulic mining operation. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The hydraulic mining process is stopped in accordance with standard task procedures. 

    ASSESSMENT CRITERION 2 
    Personal protective and safety equipment is dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 3 
    Tools and equipment are dealt with in accordance with prescribed practices. 

    ASSESSMENT CRITERION 4 
    Good housekeeping practices are maintained in accordance with company policy. 

    ASSESSMENT CRITERION 5 
    Safety devices are installed in accordance with legislation. 

    ASSESSMENT CRITERION 6 
    Reporting and data-recording requirements are met in accordance with operational requirements. 

    ASSESSMENT CRITERION 7 
    Preparation for maintenance is conducted in accordance with instructions. 

    ASSESSMENT CRITERION 8 
    Lock-out procedures are adhered to in accordance with specified requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge will be assessed in an integrated way in the context of the unit standard.

    Knowledge relating to mining fine granular material by means of hydraulic mining:
  • Purpose and importance.
  • Plant, equipment, tools and machinery used.
  • Principal components of plant and equipment.

    Critical factors relating to mining fine granular material by means of hydraulic mining:
  • Legal and specified requirements.
  • Achieving specified production requirements.
  • Risk Assessment procedures and actions.
  • Identify the principal components and explain the specification and their functions.
  • Specified communication requirements.
  • Elementary principles of the process.

    Processes and events relating to mining fine granular material by means of hydraulic mining:
  • Principles of the process.
  • Preparation.
  • Monitor and control.
  • Operating parameters and control methods.
  • Factors affecting optimum performance.

    Causes and effects (Occupational safety and health):
  • Use of personal protective equipment.
  • Use of tools and equipment.
  • Workplace hazards and associated risks.
  • Housekeeping.

    Procedures and techniques relating to mining fine granular material by means of hydraulic mining:
  • Methods of collecting, analysing, organising, summarising and presenting data.
  • Fault finding and corrective techniques.
  • Handling procedure and controls.

    Regulations, legislation, agreements, policies and standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note: The learner is able to monitor plant and process conditions, identify anomalies and non-conformances and take appropriate action to resolve the issue with regards to mining fine granular material by means of hydraulic mining. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community.

    Note: The learner contributes effectively to teamwork in the mineral processing plant by contributing to team output and adhering to relevant codes of conduct. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note: The learner demonstrates the ability to constantly monitor plant and process conditions, record information accurately and interpret plant and process information effectively. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, thus showing responsibility towards the environment and health of others.

    Note: The learner interacts confidently with the technology which is used to monitor and control conditions in the minerals processing plant and related systems. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note: The learner understands the synergy between upstream, downstream and parallel processes, and his/her own role with regards to mining fine granular material by means of hydraulic mining. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 9736, "Mine fine granular material by means of hydraulic monitoring", Level 3, 7 credits.

    Terminology:

    Specified requirements include legal and site specific requirements are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other Standards.
  • Chief Inspector of Mines' Directives.

    Site Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH&S Risks.
  • Working Guides.
  • Equipment and Materials Specifications. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  62769   National Certificate: Mineral Processing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.