SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Prepare cutting lists, set-out and mark off for machining purpose 
SAQA US ID UNIT STANDARD TITLE
261681  Prepare cutting lists, set-out and mark off for machining purpose 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
14735  Manufacture products from wood  Level 3  NQF Level 03  32   

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of building and civil construction. Learners should be able to perform duties by preparing cutting lists, setting-out and marking off for machining purpose.

A person credited with this unit standard is able to:
  • Prepare cutting lists and basic sketches from working drawings.
  • Apply occupational health and safety legislation and loss control measures.
  • Implement basic first aid.
  • Protect work during manufacturing stages. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in the following:
  • Communication at NQF Level 2.
  • Mathematical Literacy at NQF Level 2. 
    		•

    UNIT STANDARD RANGE 
    Stated with Specific Outcomes/Assessment Criteria to which they apply. The typical scope of the unit standard includes:
  • Learners' are also required to demonstrate competence in the techniques/methods for preparing cutting lists from working drawings required to manufacture wood products.
  • Techniques/methods for preparing cutting lists from working drawings.
  • Techniques for preparing basic sketches from working drawings.
  • Occupational Health and Safety Legislation and loss control measures relevant to the context of this unit standard.
  • National Building Regulations applicable to the context of this unit standard.
  • Basic first aid.
  • Protection of work during all stages of manufacturing process.
  • Housekeeping standards and procedures. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare cutting lists and basic sketches from working drawings. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Cutting lists are prepared accurately from working drawings. 

    ASSESSMENT CRITERION 2 
    Correct materials are identified and a list is compiled from working drawings. 

    ASSESSMENT CRITERION 3 
    Sketches are correctly set out and illustrated for machining of wooden components in accordance with specified dimensions. 

    ASSESSMENT CRITERION 4 
    Cost-effective working methods are employed and material wastage is minimised. 

    SPECIFIC OUTCOME 2 
    Apply occupational health and safety legislation and loss control measures. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Work is set out in accordance with Occupational Health and Safety Legislation procedures. 

    ASSESSMENT CRITERION 2 
    Tools, machines and equipment are maintained in a safe and serviceable condition. 

    ASSESSMENT CRITERION 3 
    OHS Legislation is understood and applied to specific working conditions. 

    ASSESSMENT CRITERION 4 
    All work areas are correctly set out and floor demarcations are visible. 

    ASSESSMENT CRITERION 5 
    Neat, clean and safe carpentry work areas are maintained in accordance with organisational policies and procedures. 

    SPECIFIC OUTCOME 3 
    Implement basic first aid. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Correct preventative measures are put in place and adhered to. 

    ASSESSMENT CRITERION 2 
    Hazards are identified and corrective action is taken to prevent accidents. 

    ASSESSMENT CRITERION 3 
    Lines of communication are clearly defined in case of an emergency. 

    ASSESSMENT CRITERION 4 
    Neat, clean and safe work areas are maintained in accordance with organisational policies and procedures. 

    SPECIFIC OUTCOME 4 
    Protect work during manufacturing stages. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    All wooden components are correctly assembled and stored according to manufacturers specifications. 

    ASSESSMENT CRITERION 2 
    Products are protected from damage to specified instructions. 

    ASSESSMENT CRITERION 3 
    Working methods are employed and material damage is minimised for cost effectiveness. 

    ASSESSMENT CRITERION 4 
    Neat, clean and safe carpentry work areas are maintained in accordance with organisational policies and procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Unit Standard must be registered as an assessor with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Unit Standard must be accredited as a provider with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the Qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual Unit Standards as well as the integrated competence described in the Qualification.
  • Anyone wishing to be assessed against this Unit Standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Qualifying learners understand and can explain:
  • Techniques/methods for preparing cutting lists from working drawings.
  • Techniques for preparing basic sketches from working drawings.
  • Occupational Health and Safety Legislation and loss control measures relevant to the context of this unit standard.
  • National Building Regulations applicable to the context of this unit standard.
  • Basic first aid.
  • Protection of work during all stages of the manufacturing process.
  • House-keeping standards and procedures. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made when:
  • Confirm whether the specified legislation is understood and suggest alternative, perhaps more cost effective ways to client/architect where appropriate.
  • Check drawings and report any mistakes that might be identified prior to using.
  • Check all health and safety regulations before using machines and power tools to ensure that these are safe and secure. 
    		•

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team, group, organisation, and community during:
  • Suggest alternative cost effective methods for the manufacture of wooden products to client/architect where appropriate. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organising and managing oneself and one's activities responsibly and effectively when:
  • Assure that tools and equipment are in good working order to ensure that the manufacture of wooden products is carried out effectively and the cost to company for the frequent replacement of tools and equipment is minimised.
  • Maintain a neat, clean and tidy work area.
  • Plan work so that all wooden products are manufactured within the specified time frames and to the satisfaction of the client/architect. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Collecting, analysing, organising and critically evaluating information to better understand and explain:
  • Read working drawings carefully and thoroughly in order to interpret correctly the specified requirements for manufacturing wooden products.
  • Read working drawings carefully and thoroughly in order to interpret the manufacturing and finishing specifications for any non-standard products that might be required by the client/architect.
  • Prepare machined components for assembly and verify the dimensions of the components prior to assembly. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using visual, mathematical and/or language skills in the modes of oral and/or written persuasion when:
  • Prepare basic sketches from the master working drawing that can easily be interpreted by other team members.
  • Confirm your understanding of all requirements specified for the manufacture of wooden products with the client/architect before commencing with the work at hand so as to minimise future delays that might be caused because this work has to be redone.
  • Communicate in a clear and audible manner when issuing instructions to team members so that all verbal instructions are clearly understood and can be carried out as required. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when:
  • Use electric and power tools in accordance with manufacturer`s specifications and relevant safe-handling procedures to prevent accident or injury to yourself or other team members. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrating an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation when:
  • The accurate interpretation of architect/client`s concept and the completion of work within specified time frames results in ongoing business opportunities for the organisation. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 14735, "Manufacture products from wood", Level 3, 32 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  65409   National Certificate: Building and Civil Construction  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Akaf Bodyguards 
    2. Aveng Grinaker -LTA Civil Engineering 
    3. BOLAND COLLEGE (Paarl) 
    4. Certified Training Solutions (Pty) Ltd 
    5. Construction Resource Development College 
    6. Ekurhuleni Artisans and Skills Training Pty Ltd 
    7. Elangeni College for FET - Central Office 
    8. Goitsebasadi Construction Project 
    9. In Touch Community Development & Project Managers 
    10. Leps Training Consultants 
    11. Mahumani Empowerment Servives Centre 
    12. Majuba TVET College 
    13. Mavco Engineering 
    14. Mnambithi TVET College 
    15. MOLOKO SMALL ENTERPRISE 
    16. Motheo TVET College 
    17. MPUMALANGA REGIONAL TRAINING TRUST 
    18. Northlink TVET College 
    19. Novi General Services 
    20. PIONEER BUSINESS CONSULTING (PTY) LTD 
    21. Primeserv Corporate Solutions (Pty) Ltd 
    22. Raubex Construction Pty (Ltd) 
    23. RESISA LOGISTICS (Ltd) Pty 
    24. Sakhisizwe Development Training 
    25. Sheq and Environmental Projects 
    26. Sonani Training and Communications 
    27. Tjeka Training Matters Pty Ltd 
    28. Tovani Traiding 299 
    29. Tshwane North College for FET - Central Office 
    30. Umfolozi FET College 
    31. West Coast TVET College 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.