SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Dry Lumber in Lumber drying kiln applying appropriate drying schedule with all possible stages 
SAQA US ID UNIT STANDARD TITLE
263759  Dry Lumber in Lumber drying kiln applying appropriate drying schedule with all possible stages 
ORIGINATOR
SGB Forestry 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  15 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard reflects the skills, values and knowledge required by people in the sub-field of Forestry and/or wood technology who must be able to dry lumber in lumber drying kilns applying appropriate drying schedule with all possible stages.

People credited with this unit standard are able:
  • Heat up the kiln till the lumber has attained the prescribed temperature.
  • Run the relevant drying cycle with all its stages.
  • Determine endpoint and terminate drying cycle.
  • Apply treatment to equalize moisture contents of planks in load at the end of the drying cycle.
  • Apply a conditioning treatment, after the equalizing treatment (where relevant) to release drying.
  • Keep the appropriate records of the drying process. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Communication and Mathematical Literacy at NQF level 2 or equivalent.
  • Lumber drying knowledge and skills equivalent to NQF Level 2 requirements. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Heat up the kiln till the lumber has attained the prescribed temperature. 
    OUTCOME RANGE 
    Heat supply, humidity supply, airspeed control, heating up rate, endpoint of phase. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The heating up process is performed according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    The planks in the load of lumber to be dried have all attained the prescribed temperature according to schedule. 

    SPECIFIC OUTCOME 2 
    Run the relevant drying cycle with all its stages. 
    OUTCOME RANGE 
    Kiln controls settings, moisture content monitoring for step changes with time, or moisture content stages. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The relevant drying cycle with all its stages is performed according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    The process of running the drying cycle is performed using prescribed procedures. 

    ASSESSMENT CRITERION 3 
    The conditions in the kiln are adjusted at the appropriate times and results in correctly dried lumber with the prescribed moisture content. 

    SPECIFIC OUTCOME 3 
    Determine endpoint and terminate drying cycle. 
    OUTCOME RANGE 
    Average moisture content, target moisture content, sample moisture contents. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The endpoint and termination of the drying cycle is performed in a manner that ensures that the drying of the lumber is stopped at the right time. 

    ASSESSMENT CRITERION 2 
    The process of determining endpoint and termination of drying cycle is performed according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    The dried lumber has the prescribed average moisture content according to quality requirements. 

    SPECIFIC OUTCOME 4 
    Apply treatment to equalize moisture contents of planks in load at the end of the drying cycle. 
    OUTCOME RANGE 
    Moisture contents of samples, driest sample, target moisture content, dry bulb and wet bulb settings, equilibrium moisture content and duration of treatment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The average moisture contents of planks in the load fall within the prescribed range for the dried product according to worksite procedures. 

    ASSESSMENT CRITERION 2 
    The equalizing process is performed in line with operative company procedures. 

    SPECIFIC OUTCOME 5 
    Apply a conditioning treatment, after the equalizing treatment (where relevant) to release drying stresses in the lumber. 
    OUTCOME RANGE 
    Stress testes, dry bulb and wet bulb temperatures, steam/water spray, steam bath, time. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Drying stresses in planks in the kiln load are released to prescribed levels according to quality requirements. 

    ASSESSMENT CRITERION 2 
    This process is performed using the prescribed procedures. 

    SPECIFIC OUTCOME 6 
    Keep the appropriate records of the drying process. 
    OUTCOME RANGE 
    Results of calculations on sample data, readings on controls, drying rate, final average moisture content, final moisture content distribution. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Records of all the required data for specific kiln drying runs are kept according to worksite procedures. 

    ASSESSMENT CRITERION 2 
    Records kept meet the company's operative record keeping procedures. 

    ASSESSMENT CRITERION 3 
    The records kept contain all the prescribed data according to worksite procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 4 or higher qualification, will assess the learner's competency. Only an Assessor with suitable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Learners can understand and explain, and apply where relevant:
  • Workplace procedures, safety and health measures and environmental management principles relevant to NQF Level 3 activities in lumber drying.
  • Dry lumber in a lumber drying kiln applying a kiln drying schedule with all the possible stages. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66329   National Certificate: Lumber Milling  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. INYAPA VHUSIKU CONSULTING PTY LTD 
    2. THUBELIHLE GRADUATE INSTITUTE 
    3. TIRHANI SKILLSTRAINING PTY LTD 
    4. VEB CELE & ASSOCIATES PTY LTD 
    5. WORKPLACE AND ENTREPRENEURSHIP TALENT SOLUTIONS 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.