SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate understanding of influence of wood structure and properties, and certain production factors on wood quality 
SAQA US ID UNIT STANDARD TITLE
263839  Demonstrate understanding of influence of wood structure and properties, and certain production factors on wood quality 
ORIGINATOR
SGB Forestry 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  15 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
13580  Demonstrate understanding of influence of wood structure and properties, and certain production factors on wood quality  Level 4  NQF Level 04  15   

PURPOSE OF THE UNIT STANDARD 
This unit standard reflects the skills, values and knowledge required by people in the sub-field of Forestry and/or wood technology who must be able to demonstrate an understanding of the influence of wood structure and properties.

The qualifying learner is capable of describing the influence of wood structure and properties, and certain production factors on its quality.

People credited with this Unit Standard are able to:
  • Explain the wood quality requirements generally specified by the main users of wood products.
  • Describe the effect of wood growth properties on quality requirements.
  • Describe the effect of machined wood properties on these quality requirements.
  • Describe the effect of the drying out process of wood on these quality requirements. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that a Learner who wishes to enter a learning programme for this Unit Standard will be able to demonstrate:
  • Communication and Mathematical Literacy at NQF Level 3 or equivalentUnderstanding the structure of wood and its relationship to its strength and appearance, and how it holds water. 

  • UNIT STANDARD RANGE 
  • The typical scope that this Unit Standard covers the "Range" as described in the specific outcomes of this unit standard.
  • The typical context of this unit standard is the training of a Learner at NQF Level 4 in the effect of wood growth and production factors on its quality.
  • The level assigned to this unit standard, i.e. NQF Level 4, is appropriate because:

    > For foundational competence the learner has to demonstrate possession of wide- ranging technical skills, a broad knowledge base incorporating some basic theoretical concepts, and the ability to access, analyse and evaluate information independently.
    > For practical competence the learner has to show the ability to operate in a variety of familiar and unfamiliar contexts under broad guidance and evaluation, and select from a considerable choice of procedures.
    > For reflexive competence the learner has to demonstrate the ability to handle complete responsibility for quantity and quality of own output, and possibly for those of others. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the wood quality requirements generally specified by the main users of wood products. 
    OUTCOME NOTES 
    The outcomes that learners achieve will be judged subject to these being achieved while:
  • The relevant activity is performed according to prescribed workplace procedures.
  • Strictly adhering to the prescribed safety and health measures.
  • Observing the relevant environmental management principles. 
  • OUTCOME RANGE 
    Specifications include appearance and strength. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The specifications of the end users of wood are explained according to timber trade and wood technological terminology. 
    ASSESSMENT CRITERION NOTES 
    The above assessment criteria will include assessment of the relevant crossfield outcomes:
  • Communicate effectively with all relevant persons in the relevant workplace.
  • Train persons in this workplace.
  • Ability to solve problems and make decisions regarding production activities in this workplace.
  • Lead the workers in this area. 

  • ASSESSMENT CRITERION 2 
    The quality requirements of wood are explained according to end user specifications, wood quality and using timber trade and wood technological terminology. 

    SPECIFIC OUTCOME 2 
    Describe the effect of wood growth properties on these quality requirements. 
    OUTCOME RANGE 
    Quality requirements include structure, knots, spiral grain, juvenile wood, reaction wood, annual rings, heartwood and sapwood. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The effect of wood growth properties is explained according to quality requirements. 

    ASSESSMENT CRITERION 2 
    Wood growth properties and their effect on quality are described according to wood technological terminology. 

    SPECIFIC OUTCOME 3 
    Describe the effect of machined wood properties on these quality requirements. 
    OUTCOME NOTES 
    The outcomes that learners achieve will be judged subject to these being achieved while:
  • The relevant activity is performed according to prescribed workplace procedures.
  • Strictly adhering to the prescribed safety and health measures.
  • Observing the relevant environmental management principles. 
  • OUTCOME RANGE 
    Quality requirements include production equipment, dimensional accuracy, and surface quality. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The effect of machined wood properties on quality is explained according to quality requirements. 

    ASSESSMENT CRITERION 2 
    Machined wood properties and their effect on quality are described according to wood technological terminology. 

    ASSESSMENT CRITERION 3 
    The defects on wood caused by machining are described according to worksite procedures. 

    SPECIFIC OUTCOME 4 
    Describe the effect of the drying out process of wood on these quality requirements. 
    OUTCOME NOTES 
    The outcomes that learners achieve will be judged subject to these being achieved while:
  • The relevant activity is performed according to prescribed workplace procedures.
  • Strictly adhering to the prescribed safety and health measures.
  • Observing the relevant environmental management principles. 
  • OUTCOME RANGE 
    Different types of distortion, checking surface and internal, collapse, discoloration, average moisture content, moisture content distribution, and drying stresses. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The effect of the wood drying-out process on its quality is described according quality procedures. 

    ASSESSMENT CRITERION 2 
    The process and influencing factors of drying-out wood is explained according to procedures. 

    ASSESSMENT CRITERION 3 
    The effect of the wood drying-out process is described according to wood technological terminology. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 4 or higher qualification, will assess the learner's competency. Only an Assessor with suitable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Learners can understand, explain and perform:
  • The effect of wood growth and production factors on the quality specifications generally required by the main users of wood.
  • The NQF Level 4 learner`s responsibilities regarding the safety and health stipulations, the workplace procedures and the environmental management principles relevant to the specific workplace. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage himself/herself and his/her activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 13580, "Demonstrate understanding of influence of wood structure and properties, and certain production factors on wood quality", Level 4, 15 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  66329   National Certificate: Lumber Milling  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. TIRHANI SKILLSTRAINING PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.