SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Install and maintain a range of marine systems 
SAQA US ID UNIT STANDARD TITLE
376542  Install and maintain a range of marine systems 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  25 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who work, or intend to work in a Yacht and Boat Building environment where systems necessary for yachts and boats are installed and maintained.

The learner will be able to identify ISO and SANS standard compliant installations. Additionally, the learner will be able to follow correct procedures in the installation of fuel, hydraulic, plumbing and compressed gas systems and perform all routine maintenance procedures.

Learners credited with this unit standard are able to:
  • Demonstrate an understanding of on-board fuel systems.
  • Demonstrate an understanding of marine hydraulic systems.
  • Demonstrate an understanding of marine plumbing systems.
  • Demonstrate an understanding of compressed gas for cooking and heating. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are competent in:
  • Communication and Mathematical Literacy at NQF Level 2. 

  • UNIT STANDARD RANGE 
    The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.

    All work is performed under supervision. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate an understanding of an on-board fuel system. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The components of an on-board fuel system are identified and explained according to boat building standards. 
    ASSESSMENT CRITERION RANGE 
    The components of the fuel system include but not limited to:
  • Fillers, vents, filters, hoses, tanks and fuel pumps.
     

  • SPECIFIC OUTCOME 2 
    Demonstrate an understanding of marine hydraulic systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Marine hydraulic systems are explained according to operating principles and function. 

    ASSESSMENT CRITERION 2 
    The installation and maintenance of marine hydraulic systems is explained with specific reference to steering and trim systems. 

    SPECIFIC OUTCOME 3 
    Demonstrate an understanding of marine plumbing systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The installation, maintenance and use of marine plumbing systems are explained with specific reference to national and international standards. 
    ASSESSMENT CRITERION RANGE 
    The systems include but are not limited to:
  • Hull piping, pumps, hose types, potable water, tankage and marine sanitation.
     

  • ASSESSMENT CRITERION 2 
    Marine plumbing systems are explained according to operating principles and function. 

    SPECIFIC OUTCOME 4 
    Demonstrate an understanding of compressed gas for cooking and heating. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The installation, maintenance and use of compressed gas for cooking and heating are explained according to national and international standards. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA`s policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the Qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual Unit Standards as well as the integrated competence described in the Qualification.
  • Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names, properties and appropriate uses of:
  • Different hoses.
  • Components of a fuel system.
  • Components of a plumbing system.
  • Components of a hydraulic system.
  • Components of a compressed gas system.

    Consequences of:
  • Incorrect hose selection.
  • Inappropriate component choice.
  • Incorrect installation.

    Procedures and techniques:
  • Handling procedures.
  • Safety procedures.
  • Quality procedures.
  • Recording and reporting procedures.
  • Measuring.
  • Preparation.
  • Cleaning up and finishing.

    Theoretical basis:
  • Relationship between flow rate and pressure. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Identification of different components.
  • Identification of causes of problems. 

  • UNIT STANDARD CCFO WORKING 
    Work together with others:
  • Liaising with team members and supervisor. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Plan sequence of operations based on job specification. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Examine finished installation for non-conformances. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record information on work performed.
  • Report outcome of work to supervisor. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Understanding of material properties.
  • Understand tension, stress, flow rate and pressure. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Explain the consequences of inappropriate component selection or incorrect installation and the resulting effects on the installed system. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  78863   National Certificate: Yacht and Boat Building  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.