|
|
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
| SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
| REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
| Repair belt and chain driven system |
| SAQA US ID | UNIT STANDARD TITLE | |||
| 8198 | Repair belt and chain driven system | |||
| ORIGINATOR | ||||
| SGB Grain | ||||
| PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
| - | ||||
| FIELD | SUBFIELD | |||
| Field 01 - Agriculture and Nature Conservation | Secondary Agriculture | |||
| ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
| Undefined | Regular | Level 2 | NQF Level 02 | 8 |
| REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
|
Passed the End Date - Status was "Reregistered" |
2005-04-13 | 2008-04-13 | SAQA 0459/05 | |
| LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
| 2009-04-13 | 2012-04-13 | |||
| In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
| PURPOSE OF THE UNIT STANDARD |
| Dismantling, repairing and assembling belt and chain driven systems to restore a machine to an operational condition. |
| LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
| To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have:
Knowledge of O.H.S. Act Literacy, numeracy and communication skills at or equivalent to NQF level 1. Attended a course on: Introduction to Industry. Attachment agents Lifting equipment. Measuring instruments. Tools and equipment. An understanding of general safety in the work place. An understanding of supplier and customer relationships at NQF level 1. |
| UNIT STANDARD RANGE |
| The scope of this unit standard deals dismantling, repairing and assembling belt chain driven systems including but not limited to : conveyor belts, implements, lifts and production machinery and adjusting height, alignment, tension and clearances according to manufacturer's specifications.
The specific outcomes as reflected in this unit standard are performed without direct supervision, but with access to work-site procedures and operating instructions and manufacturer's manuals. Quality procedures include but are not limited to : ISO 9000 |
| Specific Outcomes and Assessment Criteria: |
| SPECIFIC OUTCOME 1 |
| Plan and prepare for dismantling, repairing and assembling |
| OUTCOME NOTES |
| Reading and interpreting job instructions and determining a sequence of operation according to work site procedure.
Identifying, checking and selecting appropriate service tools and equipment according to job requirements. Acquiring manufacturer's manuals and / or specifications according to job requirements. Identifying and selecting appropriate personal protective equipment(PPE) and safety equipment according to statutory and jobrelated safety requirements. Preparing work area and machines according to work site and manufacturer's procedures. Liaising and informing affected parties according to work site procedures Adhering to supervisors instructions and assignments |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Job instructions, oral or written, are accurately followed and adhered to. |
| ASSESSMENT CRITERION NOTES |
| Reading and interpreting job instructions and determining a sequence of operation according to work site procedure.Identifying, checking and selecting appropriate service tools and equipment according to jobrequirements.Acquiring manufacturer's manuals and / or specifications according to job requirements.Identifying and selecting appropriate personal protective equipment(PPE) and safety equipment according to statutory and jobrelated safety requirements.Preparing work area and machines according to work site and manufacturer's procedures.Liaising and informing affected parties according to work site procedures.Adhering to supervisors instructions and assignments |
| ASSESSMENT CRITERION 2 |
| 2. Purpose of determining a sequence of operation is explained. |
| ASSESSMENT CRITERION 3 |
| 3. All affected parties are informed of results, deviations and corrective actions taken. |
| ASSESSMENT CRITERION 4 |
| 4. Purpose of selecting and using appropriate tools and equipment is explained. |
| ASSESSMENT CRITERION 5 |
| 5. Reasons for adhering to safety and quality procedures. |
| ASSESSMENT CRITERION 6 |
| 6. Consequences of not selecting particular personal protective and safety equipment are explained. |
| ASSESSMENT CRITERION 7 |
| 7. Possible consequences of not preparing work area according work site procedures are explained. |
| ASSESSMENT CRITERION 8 |
| 8. Reasons for preparing the work area according to work site and safety procedures. |
| ASSESSMENT CRITERION 9 |
| 9. Possible consequences of not inspecting and recording defective conditions are explained. |
| ASSESSMENT CRITERION 10 |
| 10. Types of defects in belt and chain driven systems and components and corrective action to be taken are identified. |
| ASSESSMENT CRITERION 11 |
| 11. Reasons for measuring and adjusting are explained. |
| ASSESSMENT CRITERION 12 |
| 12. Possible consequences of not testing machine after completion of work task |
| ASSESSMENT CRITERION 13 |
| 13. Reasons for the disposal of scrap material and storage of surplus material are explained. |
| ASSESSMENT CRITERION 14 |
| 14. Documentation and reports are completed. |
| ASSESSMENT CRITERION 15 |
| 15. Restoring work area according to work site procedures. |
| SPECIFIC OUTCOME 2 |
| Dismantle belt and chain driven systems |
| OUTCOME NOTES |
| Dismantling mechanism according to safety and manufacturer's procedure.
Using appropriate tools according to job requirements. Cleaning and sorting parts according to work site, manufacturer's and safety procedures. Inspecting, recording and reporting defects according to work site procedures. Measuring parts and comparing to manufacturer's specifications for serviceability. Completing requisition documentation for replacement parts. Selecting, positioning and using safety equipment according to work site procedures |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Job instructions, oral or written, are accurately followed and adhered to. |
| ASSESSMENT CRITERION NOTES |
| Dismantling mechanism according to safety and manufacturer's procedure.Using appropriate tools according to job requirements.Cleaning and sorting parts according to work site, manufacturer's and safety procedures.Inspecting, recording and reporting defects according to work site procedures.Measuring parts and comparing to manufacturer's specifications for serviceability.Completing requisition documentation for replacement parts.Selecting, positioning and using safety equipment according to work site procedures |
| ASSESSMENT CRITERION 2 |
| 2. Purpose of determining a sequence of operation is explained. |
| ASSESSMENT CRITERION 3 |
| 3. All affected parties are informed of results, deviations and corrective actions taken. |
| ASSESSMENT CRITERION 4 |
| 4. Purpose of selecting and using appropriate tools and equipment is explained. |
| ASSESSMENT CRITERION 5 |
| 5. Reasons for adhering to safety and quality procedures. |
| ASSESSMENT CRITERION 6 |
| 6. Consequences of not selecting particular personal protective and safety equipment are explained. |
| ASSESSMENT CRITERION 7 |
| 7. Possible consequences of not preparing work area according work site procedures are explained. |
| ASSESSMENT CRITERION 8 |
| 8. Reasons for preparing the work area according to work site and safety procedures. |
| ASSESSMENT CRITERION 9 |
| 9. Possible consequences of not inspecting and recording defective conditions are explained. |
| ASSESSMENT CRITERION 10 |
| 10. Types of defects in belt and chain driven systems and components and corrective action to be taken are identified. |
| ASSESSMENT CRITERION 11 |
| 11. Reasons for measuring and adjusting are explained. |
| ASSESSMENT CRITERION 12 |
| 12. Possible consequences of not testing machine after completion of work task |
| ASSESSMENT CRITERION 13 |
| 13. Reasons for the disposal of scrap material and storage of surplus material are explained. |
| ASSESSMENT CRITERION 14 |
| 14. Documentation and reports are completed. |
| ASSESSMENT CRITERION 15 |
| 15. Restoring work area according to work site procedures. |
| SPECIFIC OUTCOME 3 |
| Repair and assemble belt and chain driven system |
| OUTCOME NOTES |
| Ordering replacement parts according to work site procedures.
Identifying, checking and cleaning replacement parts according to work site procedures. Replacing / repairing all identified defective parts. Assembling belt and chain driven system components according to manufacturer's and quality procedures. Measuring and adjusting belt and chain driven system components during assembly according to manufacturer's specifications. Lubricating belt and chain driven system according to manufacturer's specifications. Securing and positioning attachment agents according to quality procedures |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Job instructions, oral or written, are accurately followed and adhered to. |
| ASSESSMENT CRITERION NOTES |
| Ordering replacement parts according to work site procedures.Identifying, checking and cleaning replacement parts according to work site procedures.Replacing / repairing all identified defective parts. Assembling belt and chain driven system components according to manufacturer's and quality procedures.Measuring and adjusting belt and chain driven system components during assembly according to manufacturer's specifications.Lubricating belt and chain driven system according to manufacturer's specifications.Securing and positioning attachment agents according to quality procedures |
| ASSESSMENT CRITERION 2 |
| 2. Purpose of determining a sequence of operation is explained. |
| ASSESSMENT CRITERION 3 |
| 3. All affected parties are informed of results, deviations and corrective actions taken. |
| ASSESSMENT CRITERION 4 |
| 4. Purpose of selecting and using appropriate tools and equipment is explained. |
| ASSESSMENT CRITERION 5 |
| 5. Reasons for adhering to safety and quality procedures. |
| ASSESSMENT CRITERION 6 |
| 6. Consequences of not selecting particular personal protective and safety equipment are explained. |
| ASSESSMENT CRITERION 7 |
| 7. Possible consequences of not preparing work area according work site procedures are explained. |
| ASSESSMENT CRITERION 8 |
| 8. Reasons for preparing the work area according to work site and safety procedures. |
| ASSESSMENT CRITERION 9 |
| 9. Possible consequences of not inspecting and recording defective conditions are explained. |
| ASSESSMENT CRITERION 10 |
| 10. Types of defects in belt and chain driven systems and components and corrective action to be taken are identified. |
| ASSESSMENT CRITERION 11 |
| 11. Reasons for measuring and adjusting are explained. |
| ASSESSMENT CRITERION 12 |
| 12. Possible consequences of not testing machine after completion of work task |
| ASSESSMENT CRITERION 13 |
| 13. Reasons for the disposal of scrap material and storage of surplus material are explained. |
| ASSESSMENT CRITERION 14 |
| 14. Documentation and reports are completed. |
| ASSESSMENT CRITERION 15 |
| 15. Restoring work area according to work site procedures. |
| SPECIFIC OUTCOME 4 |
| Complete dismantling / repairing activity |
| OUTCOME NOTES |
| Testing operation of system according to manufacturer and quality procedures.
Restoring work site to safe and serviceable condition according to statutory requirements. Disposing off of scrap material and storing surplus material according to statutory requirements and work site procedures. Completing and returning reports and documents according to company procedure. |
ASSESSMENT CRITERIA |
| ASSESSMENT CRITERION 1 |
| 1. Job instructions, oral or written, are accurately followed and adhered to. |
| ASSESSMENT CRITERION NOTES |
| Testing operation of system according to manufacturer and quality procedures.Restoring work site to safe and serviceable condition according to statutory requirements.Disposing off of scrap material and storing surplus material according to statutory requirements and work site procedures. Completing and returning reports and documents according to company procedure. |
| ASSESSMENT CRITERION 2 |
| 2. Purpose of determining a sequence of operation is explained. |
| ASSESSMENT CRITERION 3 |
| 3. All affected parties are informed of results, deviations and corrective actions taken. |
| ASSESSMENT CRITERION 4 |
| 4. Purpose of selecting and using appropriate tools and equipment is explained. |
| ASSESSMENT CRITERION 5 |
| 5. Reasons for adhering to safety and quality procedures. |
| ASSESSMENT CRITERION 6 |
| 6. Consequences of not selecting particular personal protective and safety equipment are explained. |
| ASSESSMENT CRITERION 7 |
| 7. Possible consequences of not preparing work area according work site procedures are explained. |
| ASSESSMENT CRITERION 8 |
| 8. Reasons for preparing the work area according to work site and safety procedures. |
| ASSESSMENT CRITERION 9 |
| 9. Possible consequences of not inspecting and recording defective conditions are explained. |
| ASSESSMENT CRITERION 10 |
| 10. Types of defects in belt and chain driven systems and components and corrective action to be taken are identified. |
| ASSESSMENT CRITERION 11 |
| 11. Reasons for measuring and adjusting are explained. |
| ASSESSMENT CRITERION 12 |
| 12. Possible consequences of not testing machine after completion of work task |
| ASSESSMENT CRITERION 13 |
| 13. Reasons for the disposal of scrap material and storage of surplus material are explained. |
| ASSESSMENT CRITERION 14 |
| 14. Documentation and reports are completed. |
| ASSESSMENT CRITERION 15 |
| 15. Restoring work area according to work site procedures. |
| UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
| An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.
Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA. Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion. |
| UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
| Basic knowledge of the safe handling of tools and equipment related to dismantling, repairing and assembling of belt and chain driven systems.
Basic knowledge and methods of assessing and analysing conditions of parts related to belt and chain driven systems. Principles of belt and chain driven systems. Basic knowledge and principles of special equipment related to dismantling, repairing and assembling belt and chain driven systems. Appropriate quality assurance procedures. Hazards associated with dismantling, repairing and assembling to belt and chain driven systems. |
| UNIT STANDARD DEVELOPMENTAL OUTCOME |
| N/A |
| UNIT STANDARD LINKAGES |
| N/A |
| Critical Cross-field Outcomes (CCFO): |
| UNIT STANDARD CCFO IDENTIFYING |
| Identify and solve problems in the process of determining and repairing defects. |
| UNIT STANDARD CCFO WORKING |
| Work effectively with others while reporting to affected parties. |
| UNIT STANDARD CCFO ORGANISING |
| Organise and manage oneself when preparing the work area and determining a sequence of operation. |
| UNIT STANDARD CCFO COLLECTING |
| Collect, analyse, organise and critically evaluate information during the planning and preparing process. |
| UNIT STANDARD CCFO COMMUNICATING |
| Communicate with others during the process of oral or written reporting. |
| UNIT STANDARD CCFO SCIENCE |
| Use science and technology when applying principles of belt and chain driven systems. |
| UNIT STANDARD CCFO DEMONSTRATING |
| Understand the world as a set of related systems by recognizing the relation of belt and chain driven system to operation of the machine. |
| UNIT STANDARD ASSESSOR CRITERIA |
| N/A |
| UNIT STANDARD NOTES |
| Values:
An awareness of expectations and obligations of basic worker / management / customer relationships |
| QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
| ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
| Elective | 14892 | National Certificate: Agricultural Machinery Technician | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2008-09-13 | AgriSETA |
| PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
| This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
| NONE |
| All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |