SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Enforce conservation compliance 
SAQA US ID UNIT STANDARD TITLE
8366  Enforce conservation compliance 
ORIGINATOR
SGB Nature Conservation 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Nature Conservation 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2004-12-02  2007-12-02  SAQA 1657/04 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2008-12-02   2011-12-02  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
253973  Enforce conservation compliance  Level 5  Level TBA: Pre-2009 was L5   

PURPOSE OF THE UNIT STANDARD 
The qualifying learner assessed as competent against this unit standard will be able to enforce legal compliance with appropriate legislation. This competence will contribute to the sustainability of natural resources. Achieving this unit standard will enhance the qualifying learner's efficiency and employment opportunities. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
UST Understand area integrity (Level 3). 

UNIT STANDARD RANGE 
Guides to the scope and complexity of the specific outcomes and essential embedded knowledge are provided in bullet points beneath each. These are prefaced by "for example" since they are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity.
These are intended only as a general guide to scope and complexity of what is required. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Apply appropriate legislation at provincial, national and international level 
OUTCOME NOTES 
  • Monitor compliance with regard to permits. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
    Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 2 
    Carry out in situ inspections to ensure compliance with permits issued 
    OUTCOME NOTES 
    Carry out in situ inspections to ensure compliance with permits issued, in a pro-active and reactive manner.

    For example:
  • Check that animals being hunted are according to permit specifications.
  • Check that fishing gear being used is appropriate for the target species indicated by the permit / licence. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 3 
    Institute legal proceedings and prosecutions 
    OUTCOME NOTES 
  • Take necessary legal action in situations where compliance with regard to permits as well as any other violations of applicable legislation. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 4 
    Gather and report information. 
    OUTCOME NOTES 
  • Gather information from various sources, including informants and report this information accurately. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 5 
    Comply with procedures with respect to collection and submission of evidence (CITES species) 
    OUTCOME NOTES 
  • Use working knowledge of the Law of Evidence and how it applies in the conservation field in order to prepare and present evidence. Must also know how to handle specific evidence, such as threatened and endangered species used as evidence in a court case. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 6 
    Identify parts and derivatives of priority species 
    OUTCOME NOTES 
  • Be able to identify parts and derivatives of species in order to ensure compliance with regard to permits and legislation. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 7 
    Cope with and manage psychological stress in self and others. 
    OUTCOME NOTES 
  • Be able to identify symptoms, and handle stress related to doing law enforcement in ones own community and handle threats and allegations made against you in your private capacity. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     

  • SPECIFIC OUTCOME 8 
    Demonstrate proficiency in self defence techniques 
    OUTCOME NOTES 
  • Be able to practice Minimum Force. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.


    Method of assessment:

    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.


    Integrated assessment:

    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 
  • ASSESSMENT CRITERION RANGE 
    A range of assessment methods should be used, including:
  • Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions
  • Product sample - examine the outcomes previously produced by the practitioner
  • Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party)
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed under point 4 immediately below.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution which is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The qualifying learner is able to demonstrate a basic knowledge and understanding of:

    1. The Bill of Rights.
    2. Basic legal procedures (e.g. arrest, evidence, crime scene).
    3. Appropriate Conservation and Environmentally related provincial, national and international legislation, treaties, conventions and agreements.
    4. Basic conservation forensics (e.g. distinguishing ivory from bone, artificial rhino horn, identify dried abalone from venus ear etc.)
    5. Public relations pertaining to conservation compliance.
    6. Criminal Procedures Act.
    7. Crime Scene Supervision.
    8. Procedures of a lawful arrest
    9. Stress Management 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Problem solving. 

    UNIT STANDARD CCFO WORKING 
    Teamwork. 

    UNIT STANDARD CCFO ORGANISING 
    Self-organisation and management. 

    UNIT STANDARD CCFO COLLECTING 
    Information evaluation. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communication. 

    UNIT STANDARD CCFO SCIENCE 
    Use of science and technology. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Inter-relatedness of systems. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Personal development. 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 253973, which is "Enforce conservation compliance", Level 5, 5 credits.

    VALUES:

    Demonstration of the knowledge and skills outlined in this unit standard must be consistent with the principles of:

    1. Maintaining essential ecological processes and life-support systems
    2. Maintaining genetic, species and ecosystem diversity
    3. Considering ecological and social rights and responsibilities, whilst ensuring sustainable utilisation of species and ecosystems
    4. Thereby yielding the greatest sustainable and equitable benefit to present generations whilst maintaining the potential to meet the needs and aspirations of future generations. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  20153   National Certificate: Conservation: Fisheries Resource Management  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  CATHSSETA 
    Core  20416   National Certificate: Conservation: Natural Resource Management: Terrestrial  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2008-03-12  Was CATHSSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.