SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Operate within the national and international legal framework 
SAQA US ID UNIT STANDARD TITLE
8479  Operate within the national and international legal framework 
ORIGINATOR
SGB Hospitality,Tourism,Travel, Leisure and Gaming 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 11 - Services Hospitality, Tourism, Travel, Gaming and Leisure 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The learner achieving this unit standard in combination with other content-related standards will be able to ensure legal requirements pertaining to the guided experience are adhered to.

This unit standard, combined with other core and elective guiding standards in a national certificate in Tourism (NQF 4) will provide the learner with the competence to practice as a tourist guide as envisaged in the Tourism Amendment Act.

Competent practitioners in guiding will provide quality experiences to tourists and thus strengthen the profession and tourism in general. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
It is assumed that a learner entering a program leading to this unit standard has literacy, numeracy, communication and research skills equivalent to NQF Level 3. It is assumed they have either designed and planned a tourist experience themselves (achieved Unit Standard: 'Design a Guided Experience') or have researched deeply around an itinerary developed by a third party. They should also have completed the unit standard: 'Interpretation in Guiding' or equivalent as they will be required to apply many of the knowledge, skills and values of these unit standards in the course of conducting the tour. 

UNIT STANDARD RANGE 
Guides to the scope and complexity of the specific outcomes and essential embedded knowledge are provided in ranges/points beneath each. These are prefaced by "e.g." since they are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity. These are intended only as a general guide to scope and complexity of what is required. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Be attentive of contractual obligations. 
OUTCOME RANGE 
  • The description of a visit or a tour itinerary represents a legal binding contract.
  • Confirmed reservations imply an obligation by the service provider.
  • Itineraries must not be changed without concrete and justifiable reasons.
  • Delivering at least the minimum service sold to the customers must adhere to the contract. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    Method of assessment
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions.
    Product sample - examine the outcomes previously produced by the practitioner.
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment.
    Questioning (verbal or written) - ask relevant questions linked to the unit standard.
    Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party).

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards.
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 2 
    Act according to health & safety regulations. 
    OUTCOME RANGE 
  • Safety regulations in National Parks and Nature Reserves.
  • Special procedures and regulations pertaining to adventure activities.
  • Rest periods for drivers.
  • Medical advice, medication and treatment other than first aid can only be provided by qualified medical personnel. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    Method of assessment
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions.
    Product sample - examine the outcomes previously produced by the practitioner.
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment.
    Questioning (verbal or written) - ask relevant questions linked to the unit standard.
    Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party).

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards.
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 3 
    Act in awareness of legally established customer-client relationships. 
    OUTCOME RANGE 
  • Be aware of customer protection framework in the E.U. and U.S.
  • Be familiar with basic content of general conditions pertaining to changes and cancellations.
  • Know which incidents are said to constitute an "act of god". 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    Method of assessment
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions.
    Product sample - examine the outcomes previously produced by the practitioner.
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment.
    Questioning (verbal or written) - ask relevant questions linked to the unit standard.
    Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party).

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards.
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 

  • SPECIFIC OUTCOME 4 
    Respect South African legal restrictions. 
    OUTCOME RANGE 
  • Passenger road transport.
  • Criminal law (prostitution, drugs).
  • Restricted areas access.
  • Indemnity forms. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    Method of assessment
    Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation.

    A range of assessment methods should be used, including:

    Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions.
    Product sample - examine the outcomes previously produced by the practitioner.
    Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment.
    Questioning (verbal or written) - ask relevant questions linked to the unit standard.
    Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party).

    Integrated assessment
    It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'.
  • Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity.
  • Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards.
  • Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant ETQA.
    2. Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA.
    3. Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQA's policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQA's (including professional bodies); and in terms of the moderation guideline detailed under point 4 immediately below.
    4. Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution which is accredited by the relevant ETQA. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The qualifying learner is able to demonstrate a basic knowledge and understanding of:

    1. What is allowed and what is not allowed to do in terms of changing services during a guided experience.
    2. The necessity and extent of information and advice given to customers for their own safety.
    3. The difference between first aid and the involvement of qualified medical personnel.
    4. Illegal services that a guide is not allowed to advice on or provides i.e. prostitution, drugs etc.
    5. Access restrictions on private property, National Parks and military areas. 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Problem solving relates to all specific outcomes. 

    UNIT STANDARD CCFO WORKING 
    Teamwork relates to the following specific outcomes:
  • Act according to health & safety regulations.
  • Act in awareness of legally established customer-client relationships. 

  • UNIT STANDARD CCFO ORGANISING 
    Self-organisation and management relates to all specific outcomes. 

    UNIT STANDARD CCFO COLLECTING 
    Information evaluation relates to all specific outcomes. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communication relates to all specific outcomes. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Inter-relatedness of systems relates to all specific outcomes. 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values

    Demonstration of the knowledge and skills outlined in this unit standard must be consistent with the principles of:

    1. Respect for ecological processes and cultural integrity.
    2. Accepting and maintaining a non-discriminatory attitude towards diversity including, for example, differences in gender, race, religion, physical ability and culture. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  17174   National Certificate: Tourism: Guiding  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CATHSSETA 
    Core  20155   National Certificate: Tourism: Guiding  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered" 
    2009-09-09  Was CATHSSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Wildlife and Environment Society of SA 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.