All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Prepare vehicles for customer use

SAQA US ID	UNIT STANDARD TITLE
8645	Prepare vehicles for customer use
ORIGINATOR
SGB Hospitality,Tourism,Travel, Leisure and Gaming
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 11 - Services			Hospitality, Tourism, Travel, Gaming and Leisure
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 1	NQF Level 01	2
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Registered"		2001-06-13	2004-06-13	SAQA 1136/01
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2005-06-13		2008-06-13

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

The qualifying learner completing this unit standard should be able to: Check and clean vehicles and equipment, report and follow up on any problems that may be identified. The qualifying learner will reflect on his / her own performance and adapt accordingly.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

None

UNIT STANDARD RANGE

Guides to the scope and complexity of the specific outcomes and essential embedded knowledge are provided in ranges/points beneath each. These are prefaced by "for example." since they are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity. These are intended only as a general guide to scope and complexity of what is required.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Check vehicle parts, equipment and consumables for correct quantity and quality

OUTCOME RANGE

Tyres, spare tyre, radio, air conditioner, fuel consumption, oil and water, mileage. The necessary vehicle safety checks are carried out.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed. They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity. Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment.

SPECIFIC OUTCOME 2

Clean vehicles

OUTCOME RANGE

Correct cleaning equipment and chemicals are used. Follow the standard operating procedures prescribed by company.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed. They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity. Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment.

SPECIFIC OUTCOME 3

Record and report on any damages or problems

OUTCOME RANGE

Records of damages are completed accurately. Relevant information is promptly forwarded to the appropriate person.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed. They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity. Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment.

SPECIFIC OUTCOME 4

Reflect on own performance and identify possible areas for self-improvement

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed. They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (e.g.: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. Consider a complete activity in the workplace (the 'whole of work' approach) and see which unit standards relate to this activity. Work out how practitioners could collect evidence on a number of unit standards at the same time covering all the critical aspects of the standards Ensure that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment.

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

1. Anyone assessing a qualifying learner against this unit standard must be registered as an assessor with the relevant ETQA. 2. Any institution offering learning that will enable achievement of this unit standard or will assess this unit standard must be accredited as a provider with the relevant ETQA. 3. Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. Therefore anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

The qualifying learner is able to demonstrate knowledge and understanding of: 1. Basic vehicle parts, their purpose and use (excluding engine & mechanical). 2. Vehicle product knowledge. 3. Basic vehicle cleaning equipment. 4. Safe and appropriate ways in the use of cleaning equipment.

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Problem solving relates to: Check vehicle parts, equipment and consumables for correct quantity and quality. Clean vehicles. Record and report on any damages or problems. Reflect on own performance and identify possible areas for self-improvement.

UNIT STANDARD CCFO ORGANISING

Self-organisation and management relates to: Check vehicle parts, equipment and consumables for correct quantity and quality. Clean vehicles. Reflect on own performance and identify possible areas for self-improvement.

UNIT STANDARD CCFO COLLECTING

Information evaluation relates to: Check vehicle parts, equipment and consumables for correct quantity and quality. Clean vehicles. Record and report on any damages or problems. Reflect on own performance and identify possible areas for self-improvement.

UNIT STANDARD CCFO COMMUNICATING

Communication relates to: Record and report on any damages or problems.

UNIT STANDARD CCFO DEMONSTRATING

Inter-relatedness of systems relates to: Check vehicle parts, equipment and consumables for correct quantity and quality. Clean vehicles. Record and report on any damages or problems.

UNIT STANDARD NOTES

Values: Demonstration of the knowledge and skills outlined in this unit standard must be consistent with the principles of: 1. Respecting the natural and cultural environment. 2. Accepting and maintaining a non-discriminatory attitude towards diversity including, for example, differences in gender, race, religion, physical ability and culture.

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	17492	National Certificate: Tourism: Car Rental	Level 4	NQF Level 04	Passed the End Date - Status was "Registered"	2004-06-13	CATHSSETA

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE

---

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.