SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Perform basic winding/rewinding of electro-mechanical components 
SAQA US ID UNIT STANDARD TITLE
9921  Perform basic winding/rewinding of electro-mechanical components 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  19 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Performing basic winding/rewinding of electro-mechanical components to manufacture/repair equipment. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
  • This unit standard has been designed as the start of a progression. It is one of a series of unit standards for activities at and above this level. The credits assigned to it are based on the assumption that I am learning what is needed for this unit standard as part of my learning for a range of related unit standards at this level.
  • If I have experience in these related activities but do not have credits for them, I can obtain credits by being assessed through a process that recognises prior learning.
  • If I do not have such experience of related activities, then my learning time will be increased. I can choose to be assessed and obtain credits against those other unit standards as I make progress towards the outcomes of this unit standard. 
    		•

    UNIT STANDARD RANGE 
    A general guide to the scope, context conditions, and level at which I am expected to perform. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare for work activity. 
    OUTCOME NOTES 
  • Read job instructions/production schedule
  • Prepare work area for winding/rewinding activities
  • Check materials and tools required are at work station 
    		•
    OUTCOME RANGE 
    Job instructions/production schedule may include a basic sketch of components. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed:
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    SPECIFIC OUTCOME 2 
    Wind/rewind components. 
    OUTCOME NOTES 
  • Move and secure components for winding/rewinding where required
  • Perform basic checks on components
  • Monitor material flow and respond to shortages 
    		•
    OUTCOME RANGE 
    Basic winding/rewinding of components typically includes coils for transformers, electric motors, and HV switchgear and instrument transformers. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    SPECIFIC OUTCOME 3 
    Perform finishing activities on components. 
    OUTCOME NOTES 
  • Dispose of scrap material and store any surplus materials 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    SPECIFIC OUTCOME 4 
    Apply quality checks on materials and components. 
    OUTCOME NOTES 
  • Conduct visual checks on incoming and finished materials and components
  • Measure components and materials and conduct basic electrical tests
  • Recognise defects and mark or remove defective materials or components 
    		•
    OUTCOME RANGE 
    Measuring equipment includes rulers, verniers, go/no/go gauges, master samples, micrometers. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    SPECIFIC OUTCOME 5 
    Report out of compliance or unsafe conditions while working. 
    OUTCOME NOTES 
  • Report problems with materials, components and equipment 
    		•

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    SPECIFIC OUTCOME 6 
    Work safely with due care for self, fellow workers, equipment, materials and the environment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    SPECIFIC OUTCOME 7 
    Work and participate in team processes. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Good quality production continues. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 2 
    2. Sufficient materials/components continuously available. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 

    ASSESSMENT CRITERION 3 
    3. All defective components and materials are marked or removed from the production line. 
    ASSESSMENT CRITERION NOTES 
    Indicators:
    1. Total range of checks on materials and components are regularly and consistently performed
    2. Minor adjustments to wound/rewound components are made where required quickly and appropriately
    3. Process never stops through lack of materials/components where it is within my control
    4. Problems are communicated to appropriate personnel
    5. Correct measuring and testing equipment is selected and used in a safe manner
    6. A clean and tidy work environment is maintained
    7. Work is carried out in a safe manner
    8. Production data is accurately documented
    9. Reporting is done on time and accurately

    Understanding confirmed
    1. Quality awareness: (impact on internal/external customers) of defective materials or components
    2. Implications of not responding or responding slowly to problems at work station
    3. Implications for accuracy of the misuse of measuring equipment
    4. Impact of not maintaining a continuous production flow
    5. Need for accurate up-to-date documentation on production/shift occurrences
    6. Implications of not following safe working practices 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assurer who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names & functions of:
  • Insulating materials
  • Components
  • Measuring equipment
  • Product and equipment terminology associated with an electro-mechanical plant
  • Material/component defects that may occur in an electro-mechanical plant.

    2. Attributes, descriptions, characteristics & properties:
  • Material/component defects that may occur in an electro-mechanical plant
  • Properties of insulation materials
  • End users of product.

    3. Sensory cues:
  • Cues for different defects (what I see, hear, smell, feel).

    4. Purpose of:
  • Winding/rewinding electro-mechanical components
  • Quality checks and procedures
  • Reporting incidents and conditions.

    5. Processes, events, causes and effects, implications:
  • Process and sequence of operation of an electro-mechanical plant
  • Causes and responses to common problems
  • Implications and consequences of situations such as, e.g. using poor quality, damaged or faulty materials, allowing faulty processes to continue, delaying reports about problems in work area.

    6. Procedures and techniques:
  • Methods of winding/rewinding electro-mechanical components
  • Techniques/methods of terminating coil ends
  • Methods of bracing, lashing, securing of coils and components
  • Basic electrical testing procedures
  • Finishing procedures
  • Ways of minimising scrap
  • Communication procedures
  • Recording and reporting procedures.

    7. Regulations, legislation, agreements, policies, standards:
  • Quality standards and specifications
  • Applicable safety, health and environmental protection legislation and standards.

    8. Theory: rules, principles, laws:
  • Concepts of quality assurance related to this activity
  • Basic electrical principles.

    9. Relationships, systems:
  • Relationship between customer needs and product specifications. 
    		•


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise and respond to problems/defects. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • According to procedures, following regular, consistent methodical work patterns. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Collect sensory and numeric information from the process and the components
  • Classify the information and identify deviations from the norm. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record outputs, incidents, measurements
  • Report incidents and conditions. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Conduct basic electrical tests on components. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Identify and respond to quality problems as part of the quality chain from manufacturing to customer. 
    		•

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  58860   National Certificate: Electro-Mechanical Winding  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  MERSETA 
    Elective  21014   National Certificate: Metal and Engineering Manufacturing  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2008-11-01  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.