SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION: 

Bachelor of Engineering Technology in Mechanical Engineering 
SAQA QUAL ID QUALIFICATION TITLE
99406  Bachelor of Engineering Technology in Mechanical Engineering 
ORIGINATOR
Central University of Technology, Free State 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
CHE - Council on Higher Education  HEQSF - Higher Education Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National First Degree  Field 06 - Manufacturing, Engineering and Technology  Engineering and Related Design 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  360  Not Applicable  NQF Level 07  Regular-Provider-ELOAC 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Registered  EXCO 0324/24  2024-07-01  2027-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2028-06-30   2033-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
Purpose:
The purpose of the Bachelor of Engineering Technology in Mechanical Engineering qualification is to develop qualifying learners who are competent, ethically grounded, and industry-ready engineering technologists capable of applying mechanical engineering principles to solve broadly defined, real-world problems. Upon completion of this qualification, the qualifying learner will possess a solid foundation in mechanical design, thermodynamics, fluid mechanics, strength of materials and manufacturing processes, with a strong emphasis on practical application, innovation, and sustainability. This qualification is aimed at industry-oriented learners who prefer applying general engineering principles to solve practical, real-world technical problems rather than focusing on abstract theoretical research.

The qualification is ideal for Grade 12 learners with strong performance in Mathematics and Physical Sciences, as well as TVET college qualifying learners or Diploma holders looking to advance their qualifications to an NQF Level 7 qualification. A qualification in mechanical engineering provides a learner with a practical, industry-ready qualification that focuses on applying engineering principles rather than purely theoretical research. In addition, this qualification provides the necessary academic base to register as a Professional Engineering Technologist with the Engineering Council of South Africa (ECSA).

The qualifying learners will be equipped to contribute meaningfully to the design, development, implementation, and maintenance of mechanical systems and technologies across diverse sectors such as manufacturing, energy, transportation, and mining. The qualification creates pathways to further post graduate study opportunities in mechanical engineering and provides the educational foundation required for a qualifying learner to register as a Candidate Engineering Technologist with the Engineering Council of South Africa (ECSA). After a prescribed period of training and experience, the candidate can apply for professional registration as a Professional Engineering Technologist (Pr Tech Eng). Upon completion, a qualifying learner will have the skills to model and solve broadly defined technical problems. Qualifying learners will be capable of performing creative and procedural engineering designs, conducting systematic investigations through data analysis, and using modern industry tools like CAD and simulation software to develop prototypes or optimise manufacturing processes, as well as investigating system failures and delivering data-driven reports to drive performance improvements in sectors such as manufacturing, mining, and energy. Aligned with the Sydney Accord, this pathway mandates legal and ethical responsibility for project governance, safety, and environmental sustainability.

A qualified learner will be able to:
  • Apply mechanical engineering principles to identify, analyse, and solve broadly defined technical problems using creative and critical thinking.
  • Demonstrate understanding of mathematics, natural sciences, and mechanical engineering fundamentals to support design, analysis, and decision-making.
  • Design mechanical components, systems, or processes that meet specified needs, considering functionality, safety, cost, and sustainability.
  • Plan and conduct experiments or investigations, collect and interpret data, and draw valid conclusions to improve engineering solutions.
  • Use modern engineering tools, software, and techniques to model, simulate, and solve mechanical engineering problems effectively.

    Rationale:
    The qualification aims to produce engineering technologists who can apply established and newly developed engineering technology to solve broadly defined engineering problems. After completion of the qualification, qualifying learners will have an in-depth knowledge base with a strong emphasis on practical application, system development, and operational evaluation of mechanical systems and processes in an industrial setting, as well as equipping qualifying learners with the skills to provide leadership in the application of technology and commercially effective operations.

    The qualification benefits the engineering sector by providing industry-ready professionals who bridge the gap between theoretical design and practical implementation, thereby addressing critical technical skills shortages. For society, it ensures the reliable delivery of essential infrastructure while upholding public safety through strict adherence to ethical standards and the OHS Act. On an economic level, the qualification drives industrialisation and supports the goals of the National Development Plan by enhancing the competitiveness of local industries, developing entrepreneurship, and attracting investment through a highly skilled, certified workforce. The Engineering Council of South Africa (ECSA) and the Department of Higher Education and Training (DHET) identified the need for the B Eng Tech to align South African qualifications with the Higher Education Qualifications Sub-Framework (HEQSF). This shift was necessary to replace the older, phasing-out National Diploma and B Tech model with a streamlined, three-year professional degree. The primary goal was to ensure international comparability through the Sydney Accord, while simultaneously addressing industry demands for qualifying learners with a higher level of analytical problem-solving capability and a stronger theoretical foundation in the application of modern technology.

    Typical learners for the qualification Tech are practically minded problem solvers who excel in Mathematics and Physical Sciences but prefer a hands-on, application-based approach to engineering. They include matriculants seeking a direct, three-year path into the industry, as well as technical professionals and TVET qualifying learners aiming to elevate their status to an NQF Level 7 qualification for professional registration at ECSA as a Professional Engineering Technologist (Pr Tech Eng). Qualifying learners typically enter the professional workforce as Mechanical Engineering Technologists, focusing on the design, installation, and management of engineering systems. Qualifying learners are in high demand for operational and leadership roles, such as production managers, plant engineers, and project managers, where they oversee the maintenance and efficiency of industrial machinery. Their activities span critical sectors including mining, automotive manufacturing, energy utilities, as well as consulting firms where they design HVAC and fire protection systems. Completing this qualification enables qualifying learners to pursue careers as Professional Engineering Technologists, taking legal responsibility for technical projects and ensuring operational excellence across the manufacturing and heavy industry landscapes. Completion of this qualification offers vertical progression from a B Eng Tech Honours (NQF Level 8) to master's and doctoral degrees for qualifying learners pursuing research or specialisation.

    The qualification is endorsed by the Engineering Council of South Africa (ECSA) and is aligned with ECSA's qualification standard E-02-PT for a B Eng Tech qualification. The B Eng Tech qualification satisfies the professional registration requirements of ECSA by fulfilling the 10 Exit Level Outcomes (ELOs) essential for meeting the educational requirements for the Professional Engineering Technologist (Pr Tech Eng) category. It is structured around 10 Exit Level Outcomes (ELOs), which mandate that qualifying learners demonstrate specific competencies, such as broadly defined problem-solving, design, and ethical practice. This accreditation allows qualifying learners to register as Candidates immediately upon completion, providing a formal path toward full professional status. As a qualification aligned with the Sydney Accord, it ensures international comparability and facilitates membership in global professional bodies such as the Institution of Mechanical Engineers (IMechE) and Engineers Australia.

    The qualifying learners from the qualification will typically operate as Mechanical Engineering Technologists in a vast and diverse range of industries. Their role is primarily focused on the application and implementation of existing and newly developed technology to solve broadly defined engineering problems, manage projects, and optimise production processes.

    A qualification will benefit qualifying learners by enhancing their career readiness through practical engineering skills, preparing qualifying learners for real-world challenges in design, manufacturing, and maintenance. It creates pathways to further study and provides the academic foundation for registration with the Engineering Council of South Africa (ECSA) as a Professional Engineering Technologist. Engineering Technologists empower society through innovation and infrastructure and strengthen the economy by driving industrial growth and technological advancement. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Recognition of Prior Learning (RPL):
    The institution has an approved Recognition of Prior Learning (RPL) policy which is applicable with regard to equivalent qualifications for admission into the Bachelor of Engineering Technology in mechanical engineering.
  • RPL will be applied to accommodate applicants who qualify.
  • RPL thus provides alternative access and admission into this qualification, as well as advancement within the qualification.
  • RPL may be applied for access, credits from modules and credits for or towards the qualification.

    RPL for access:
  • Learners who do not meet the minimum entrance requirements or the required qualification that is at the same NQF level as the qualification required for admission into this qualification may be considered for admission through RPL.
  • To be considered for admission in the qualification based on RPL, applicants should provide evidence in the form of a portfolio that demonstrates that they have acquired the relevant knowledge, skills, and competencies through formal, non-formal and/or informal learning to cope with the qualification expectations should they be allowed entrance into the qualification.

    RPL for advanced standing:
  • An applicant who has already achieved some of the competencies expected for admission to, or progression within the Bachelor of Engineering Technology in Mechanical Engineering may be admitted despite lacking the conventional qualification pathway. In such an instance, the applicant's prior learning, knowledge, skills, and professional experience will be assessed to determine whether they are equivalent to the learning outcomes normally required for admission. This learning may have been acquired through formal studies, workplace experience, professional development, community engagement, short courses, research, or other forms of non-formal and informal learning.

    RPL for module exemption:
  • Learners may apply for RPL to be exempted for modules that form part of the qualification. For a learner to be exempted from a module, the learner needs to provide sufficient evidence in the form of a portfolio that demonstrates that competency was achieved for the learning outcomes that are equivalent to the learning outcomes of the module.

    RPL for credit:
  • Learners may also apply for RPL for credit for or towards the qualification, in which they must provide evidence in the form of a portfolio that demonstrates prior learning through formal, non-formal and/or informal learning to obtain credits towards the qualification.
  • Credit shall be appropriate to the context in which it is awarded and accepted.

    Entry Requirements:
  • National Senior Certificate (NSC), NQF Level 4, granting access to Bachelor's degree studies.
    Or
  • Senior Certificate, NQF Level 4, with endorsement granting access to Bachelor's degree studies.
    Or
  • National Certificate (Vocational), NQF Level 4, granting access to Bachelor's degree studies.
    Or
  • Higher Certificate in Mechanical Engineering, NQF Level 5.
    Or
  • Diploma in Mechanical Engineering, NQF Level 6. 

  • RECOGNISE PREVIOUS LEARNING? 
    Y 

    QUALIFICATION RULES 
    This qualification consists of compulsory and elective modules at National Qualifications Framework Level 5, 6, and 7, totalling 420 credits.

    Compulsory Modules, NQF Level 5, 126 Credits:
  • Basic Digital Literacy, 14 Credits.
  • Academic Literacy and Communication Studies, 14 Credits.
  • Engineering Mathematics I, 14 Credits.
  • Engineering Physics I, 14 Credits.
  • Manufacturing and Workshop Practice I, 14 Credits.
  • Engineering Materials I, 14 Credits.
  • Thermofluids I, 14 Credits.
  • Machine Mechanics I, 14 Credits.
  • Engineering CAD Drawing I, 14 Credits.

    Elective Modules at NQF Level 5, 14 Credits: (Select one (1) module)
  • Engineering Manufacturing II, 14 Credits.
  • Electrical Technology II, 14 Credits.

    Compulsory Modules, NQF Level 6, 126 Credits:
  • Engineering Strength of Materials II, 14 Credits.
  • Thermofluids II, 14 Credits.
  • Machine Mechanics II, 14 Credits.
  • Engineering Design II, 14 Credits.
  • Engineering Project Management, 14 Credits.
  • Energy Technology III, 14 Credits.
  • Machine Mechanics III, 14 Credits.
  • Engineering Mathematics II, 14 Credits.
  • Engineering Design III, 14 Credits.

    Elective Modules, NQF Level 6, 14 Credits: (Select one (1) module)
  • Engineering Manufacturing III, 14 Credits.
  • Electrical Technology III, 14 Credits.

    Compulsory Modules, NQF Level 7, 140 Credits:
  • Engineering Strength of Materials III, 14 Credits.
  • Fluid Science III, 14 Credits.
  • Thermal Science III, 14 Credits.
  • Structural Analysis III, 14 Credits.
  • Hydrodynamic Machines III, 14 Credits.
  • Refrigeration III, 14 Credits.
  • Control Systems III, 14 Credits.
  • Engineering Mathematics III, 14 Credits.
  • Engineering Design Project, 28 Credits. 

  • EXIT LEVEL OUTCOMES 
    1. Apply engineering principles to systematically diagnose and solve broadly defined engineering problems.
    2. Apply knowledge of mathematics, natural science and engineering sciences to applied engineering procedures, processes, systems and methodologies to solve broadly defined engineering problems.
    3. Perform procedural and non-procedural design of broadly defined components, systems, works, products or processes to meet desired needs normally within applicable standards, codes of practice and legislation.
    4. Conduct investigations of broadly defined problems through locating, searching and selecting relevant data from codes, databases and literature, designing and conducting experiments, analysing and interpreting results to provide valid conclusions.
    5. Use appropriate techniques, resources, and modern engineering tools, including information technology, prediction and modelling, for the solution of broadly defined engineering problems, with an understanding of the limitations, restrictions, premises, assumptions and constraints.
    6. Communicate effectively, both orally and in writing, with engineering audiences and the affected parties.
    7. Demonstrate knowledge and understanding of the impact of engineering activity on society, economy, industrial and physical environment, and address issues by analysis and evaluation.
    8. Demonstrate knowledge and understanding of engineering management principles and apply these to one's own work, as a member and leader in a technical team and to manage projects.
    9. Engage in independent and life-long learning through well-developed learning skills.
    10. Comprehend and apply ethical principles and commit to professional ethics, responsibilities and norms of engineering technology practice. 

    ASSOCIATED ASSESSMENT CRITERIA 
    Associated Assessment Criteria for Exit Level Outcome 1:
  • Analyse and define the problem and identify criteria for an acceptable solution.
  • Identify relevant information, engineering knowledge and skills required to solve the problem.
  • Generate and formulate possible approaches that would lead to a workable solution for the problem.
  • Model and analyse possible solutions.
  • Evaluate possible solutions and select the best solution.
  • Formulate and present the solution in an appropriate form.

    Associated Assessment Criteria for Exit Level Outcome 2:
  • Apply an appropriate mix of knowledge of mathematics, numerical analysis, statistics, natural science and engineering science at a fundamental level and in a specialist area to solve broadly defined engineering problems.
  • Use theories, principles and laws.
  • Perform formal analysis and modelling on engineering materials, components, systems or processes.
  • Communicate concepts, ideas and theories.
  • Reason about and conceptualise engineering materials, components, systems or processes.
  • Handle uncertainty and risk.
  • Perform work within the boundaries of the practice area.

    Associated Assessment Criteria for Exit Level Outcome 3:
  • Formulate the design problem to satisfy user needs, applicable standards, codes of practice and legislation.
  • Plan and manage the design process to focus on important issues and recognise and deal with constraints.
  • Acquire and evaluate knowledge, information and resources to apply appropriate principles and design tools to provide a workable solution.
  • Perform design tasks, including analysis, quantitative modelling and optimisation of the product, system or process, subject to the relevant premises, assumptions, constraints and restrictions.
  • Evaluate alternatives for implementation and select a preferred solution based on techno-economic analysis and judgement.
  • Assess the selected design in terms of the social, economic, legal, health, safety, and environmental impact and benefits.
  • Communicate the design logic and relevant information in a technical report.

    Associated Assessment Criteria for Exit Level Outcome 4:
  • Plan and conduct investigations and experiments within an appropriate discipline.
  • Search available literature and critically evaluate material for suitability to the investigation.
  • Perform analysis as necessary to the investigation.
  • Select and use equipment or software as appropriate in the investigations.
  • Analyse, interpret and derive information from available data.
  • Draw conclusions from an analysis of all available evidence.
  • Record the purpose, process and outcomes of the investigation in a technical report.

    Associated Assessment Criteria for Exit Level Outcome 5:
  • Assess the method, skill or tool for applicability and limitations against the required result.
  • Apply the method, skill or tool correctly to achieve the required result.
  • Test and assess results produced by method, skill or tool against required results.
  • Create, select and use computer applications as required by the discipline.

    Associated Assessment Criteria for Exit Level Outcome 6:
  • Use structure, style and language in written and oral communication that are appropriate for the purpose of the communication and the target audience.
  • Use graphics that are appropriate and effective in enhancing the meaning of text.
  • Use visual materials to enhance oral communications.
  • Use accepted methods for providing information to others involved in engineering activity.
  • Deliver oral communication fluently with the intended meaning being apparent.

    Associated Assessment Criteria for Exit Level Outcome 7:
  • Explain the impact of technology in terms of the benefits and limitations to society.
  • Analyse engineering activity in terms of the impact on occupational and public health and safety.
  • Analyse engineering activity in terms of the impact on the physical environment.
  • Consider personal, social, economic, cultural values and requirements for those who are affected by the engineering activity.

    Associated Assessment Criteria for Exit Level Outcome 8:
  • Explain the principles of planning, organising, leading and controlling.
  • Carry out individual work effectively, strategically and on time.
  • Contribute to team activities, including disciplinary boundaries, to support the output of the team.
  • Demonstrate functioning as a team leader.
  • Organise and manage a design or research project.
  • Carry out effective communication in the context of individual and team work.

    Associated Assessment Criteria for Exit Level Outcome 9:
  • Manage learning tasks autonomously and ethically, individually and in learning groups.
  • Reflect on learning undertaken and determine own learning requirements and strategies to suit personal learning style and preferences.
  • Source, organise and evaluate relevant information.
  • Comprehend and apply knowledge acquired outside of formal instruction.
  • Challenge assumptions critically and embrace new thinking.

    Associated Assessment Criteria for Exit Level Outcome 10:
  • Describe the nature and complexity of ethical dilemmas.
  • Describe the ethical implications of decisions made.
  • Apply ethical reasoning to evaluate engineering solutions.
  • Maintain continued competence by keeping abreast of up-to-date tools and techniques available in the workplace.
  • Understand and embrace the system of continuing professional development as an on-going process.
  • Accept responsibility for consequences stemming from own actions.
  • Make judgements in decision making during problem solving and design.
  • Limit decision making to area of current competence.

    Integrated assessment:
    In the Bachelor of Engineering Technology (B Eng Tech) in Mechanical Engineering, integrated assessment strategies are designed to evaluate a learner's ability to combine technical knowledge with practical skills and professional attributes to solve broadly defined engineering problems. Assessment instruments are mapped directly to the Exit Level Outcomes to confirm competence in problem solving, design, investigation, communication, ethics, and management. Moderation of assessments is conducted both internally and externally in accordance with institutional assessment policy to ensure validity, reliability, and fairness. External moderators with appropriate professional expertise are appointed for key modules and the capstone design project.

    In all the modules where Engineering Council of South Africa (ECSA) graduate attributes (GAs), representative of ELOs 1 - 10, are assessed, a sub-minimum of 50% applies, and the consequence of unsatisfactory performance in any GA (after 2nd submission opportunity) is failure of the module, and the module needs to be repeated. Assessment in the Bachelor of Engineering Technology in Mechanical Engineering is designed to determine the learner's applied competence, integrating foundational knowledge, practical skills, and reflexive understanding. The assessment strategy aligns with institutional policy and the Engineering Council of South Africa (ECSA) outcome-based approach.

    The ratio of formative to summative assessment is 20:80.

    Formative assessment:
    The overall assessment balance across the qualification is maintained at approximately 20% in the formative component. This ensures sufficient opportunities for continuous learning and reflection while maintaining rigorous final evaluation of competence. Formative assessments provide ongoing feedback to guide learning and measure progress throughout each semester. These assessments include:
  • Class tests, quizzes, and tutorial exercises.
  • Laboratory experiments and practical demonstrations.
  • Design assignments, simulations, and case studies.
  • Short reports, portfolios of evidence, and presentations.

    Formative results contribute continuously toward the semester mark and ensure that learners integrate theory with practical application before final evaluation.

    Summative assessment:
    The overall assessment balance across the qualification is maintained at approximately 80% summative component. This ensures sufficient opportunities for continuous learning and reflection while maintaining rigorous final evaluation of competence. Summative assessments evaluate cumulative achievement of learning outcomes at the end of a module or academic period. These include:
  • End-of-semester written examinations.
  • Major design or research projects.
  • Final presentations and technical reports.

    Summative assessments verify mastery of the Exit Level Outcomes and confirm that learners can apply knowledge, skills, and professional judgement independently. 

  • INTERNATIONAL COMPARABILITY 
    International comparability of engineering education qualifications is ensured through the Washington, Sydney and Dublin Accords, all being members of the International Engineering Alliance (IEA). The Sydney accord specifically is an international agreement between bodies responsible for accrediting engineering technology academic qualifications. The ELOs and level descriptors defined in this qualification are aligned with the International Engineering Alliance's Graduate Attributes and Professional Competencies. The following 10 countries are signatories of the Dublin Accord under EIA.

    Subsequently, learner mobility and recognition of prior learning/studies within these Qualifications accredited under the EIA (Dublin) Accord, will be possible, while adhering to all the required good practices at an international level. Hence, given that this envisaged Qualification is endorsed by ECSA and meeting all the requirements of the ECSA Qualification Standard (E-02-PN), it automatically entails that the Qualification is equivalent to any other international Qualification endorsed and accepted by the EIA. Thus, essentially no detailed comparisons are required to demonstrate the international comparability.

    Furthermore, given that the same Qualification Standard applies to all the international academic Qualification signatories of the Dublin Accord under the EIA, the admission requirements, knowledge areas, ELOs/GAs, credits, assessments, duration, and/or articulation pathways will be similar; hence, ensuring the above-mentioned learner mobility and/or possible module recognitions.

    The following 10 countries are signatories of the Dublin Accord under EIA:
  • Australia, Engineers Australia (EA) (2001)
  • Canada, Canadian Council of Technicians and Technologists (CCTT)
  • Chinese Taipei, Institute of Engineering Education Taiwan (IEET)
  • Hong Kong China, Hong Kong Institution of Engineers (HKIE) Ireland Engineers Ireland (EI)
  • Korea, Accreditation Board for Engineering Education of Korea (ABEEK)
  • New Zealand, Institution of Professional Engineers New Zealand (IPENZ)
  • South Africa, Engineering Council South Africa (ECSA)
  • United Kingdom, Engineering Council United Kingdom (ECUK)
  • United States, Accreditation Board for Engineering and Technology (ABET) 

  • ARTICULATION OPTIONS 
    The qualification provides the following articulation options:
    Horizontal articulation:
  • Advanced Diploma in Mechanical Engineering, NQF Level 7.
  • Bachelor of Engineering Technology in Mechanical Engineering, NQF Level 7.
  • Bachelor of Science, NQF Level 7.
  • There are currently no registered horizontal articulation possibilities between Sub-Frameworks for this qualification.

    Vertical articulation:
  • Postgraduate Diploma in Engineering in Mechanical Engineering, NQF Level 8.
  • Bachelor of Engineering Technology Honours in Mechanical Engineering, NQF Level 8.
  • Bachelor of Engineering Honours, NQF Level 8.
  • Bachelor of Science in Engineering, NQF Level 8.

    Diagonal articulation:
  • Advanced Occupational Certificate: Mechanical Engineering Designer, NQF Level 6. 

  • MODERATION OPTIONS 
    N/A. 

    CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    N/A. 

    NOTES 
    N/A. 

    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Central University of Technology, Free State 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.