SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION: 

Bachelor of Engineering Technology in Civil Engineering 
SAQA QUAL ID QUALIFICATION TITLE
99641  Bachelor of Engineering Technology in Civil Engineering 
ORIGINATOR
Cape Peninsula University of Technology 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
CHE - Council on Higher Education  HEQSF - Higher Education Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National First Degree  Field 12 - Physical Planning and Construction  Civil Engineering Construction 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  360  Not Applicable  NQF Level 07  Regular-Provider-ELOAC 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Registered  EXCO 0324/24  2024-07-01  2027-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2028-06-30   2033-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
The purpose of the Bachelor of Engineering Technology in Civil Engineering is to provide learners with a sound knowledge base, abilities and skills required for further learning towards becoming a competent practicing Civil Engineering Technologist or Certificated Engineer.

Specifically, this qualification is primarily industry-oriented and provides learners with the educational base required for registration as a Professional Engineering Technologist and/or Certificated Engineer with Engineering Council of South Africa (ECSA).
An appropriate level of achievement, the ability to enter NQF Level 8 programmes and then to proceed to Master's programmes.
The educational base and proficiency required for one to be a Certified Civil Engineer in areas related to mining and occupational health and safety.

On completion of this qualification, graduates will be able to:
  • Apply knowledge of Mathematics, Natural Science and Engineering Science to solve broadly defined Civil Engineering problems.
  • Perform procedural and non-procedural Civil Engineering designs within applicable standards and codes of practice.
  • Conduct investigations of Civil Engineering problems through experiments, data collection and analysis.
  • Use appropriate techniques, resources and modern engineering tools, including the use of Information Technology.
  • Communicate effectively and professionally, both orally and in writing, with engineering audiences and stakeholders.
  • Demonstrate critical awareness of the impacts of the Civil Engineering activities on communities, economy, industry, commerce and the physical environment.
  • Effectively work as an individual and in teams in managing Civil Engineering projects.
  • Engage in independent learning and lifelong learning through well-developed learning skills.
  • Comprehend and apply ethical principles and commit to professional ethics, responsibilities and norms of Civil Engineering Technology practice.

    Rationale:
    This qualification is designed to provide learners with integrated knowledge and equip them with skills relevant to Civil Engineering. This qualification fits-in with the new system for accreditation by the statutory professional body, Engineering Council of South Africa (ECSA) and was developed in consultation with ECSA. Learners will acquire Civil Engineering knowledge in line with international trends in skills and professional development.
    Furthermore, this qualification will address the deficiencies identified by industry in the field of Mathematics, Basic Science and Engineering Science. This qualification intends to produce a high calibre of graduates who have a strong technological and entrepreneurial background thereby addressing youth unemployment through job creation making South African industries more competitive globally. The National Development Plan (2010-2030) highlights the fact that there is a critical shortage of good-quality professionals in Civil Engineering, including Engineers, Technologists and Technicians. Therefore, this qualification will go a long way in meeting the nation's requirements for Civil Engineering Technologists.

    The Civil Engineering profession contributes to the development of the country through the provision of infrastructure in the built environment, which leads to socio-economic growth and sustainability. The key ingredient to economic growth requires the government to invest in infrastructure projects like roads, electricity, water and housing, and in order to do all of that, the country needs Civil Engineers and Technologists.

    Qualified learners will be prepared to enter the niche labour market in Water, Structural and Transportation Engineering. The most important stakeholders and role players include, amongst others, Civil Engineering Construction Companies, Consulting Firms, Government Departments and Agencies. Therefore, this field of study is highly competitive and hence will be attractive to Civil Engineering learners. Consequently, this Degree focuses on a professional qualification which caters for the needs of industry.

    The qualification attracts a broad spectrum of learners, including:
  • School Leavers: Individuals with a National Senior Certificate (NSC) or National Certificate (Vocational) (NCV) Level 4, specifically requiring Mathematics and Physical Science (typically 60%+).
  • TVET College Graduates: Individuals with an N4/5/6 Technical Diploma looking to upgrade to a higher-level degree, sometimes allowing for recognition of prior learning (RPL).
  • Industry Professionals: Current workers in the construction sector, such as engineering technicians, who wish to upskill to a professional technologist level.
  • Targeted Skills Base: Learners with strong interests in maths, physics, urban planning, construction materials, and environmental sustainability.

    Graduate are equipped with - i.e., meets educational requirements - to register as Professional Engineering Technologist (after gaining the required industry experience). Key Occupational roles include:
  • Civil Engineering Technologist: Designing and supervising construction projects (bridges, roads, water supply, structural steel).
  • Structural Technologist: Focusing on the stability, strength, and analysis of buildings and structures.
  • Construction Technologist/Project Manager: Overseeing construction sites, planning, costs, and worker safety.
  • Transportation/Urban Planner: Designing and maintaining transport infrastructure (roads, rail, airports).
  • Water/Environmental Technologist: Managing water resources, waste treatment, and environmental compliance.
  • Geotechnical Technologist: Testing soil behaviour for foundations.

    Sectors and Areas of Operation for learners who complete the qualification include:
  • Engineering Consultancies: Design offices using CAD and Civil 3D software to create infrastructure models.
  • Construction Firms: Site management, supervising construction of large-scale projects (roads, harbours, pipelines, dams).
  • Public Service/Government: Municipal, provincial, and national departments responsible for infrastructure planning and maintenance.
  • Specialised Industries: Mining companies and energy providers (e.g., Eskom).

    This qualification is positioned at NQF Level 7 and forms part of the Engineering qualifications pathway:
  • National Senior Certificate - NQF Level 4 (with Mathematics and Physical Sciences).
  • Diploma in Engineering - NQF Level 6 / Higher Certificate - NQF Level5 (articulation pathway).
  • Bachelor of Engineering Technology in Civil Engineering - NQF Level 7.
  • Bachelor of Engineering Technology Honours in Civil Engineering - NQF Level 8.
  • Master's and Doctoral qualifications (where admission requirements are met) - NQF Levels 9 & 10.
    The qualification supports both vertical and horizontal articulation within the Higher Education Qualifications Sub-Framework (HEQSF). It also serves as a pathway toward professional registration as a Professional Engineering Technologist, subject to meeting statutory body requirements. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Recognition of Prior Learning (RPL):
    The institution has an approved Recognition of Prior Learning (RPL) policy, which is compliant with the national CHE and NQF RPL Policy, applicable to equivalent qualifications for admission into the qualification. RPL may be applied to accommodate applicants who qualify. RPL thus provides alternative access and admission to qualifications and advancement within qualifications. RPL may be applied for access, module exemption (credit) or advanced standing.

    RPL for access:
  • Applicants who do not meet the minimum entrance requirements or the required qualification that is at the same NQF level as the qualification required for admission may be considered for admission through RPL.
  • To be considered for admission in the qualification based on RPL, applicants should provide evidence in the form of a portfolio or other appropriate assessment methods that demonstrates that they have acquired the relevant knowledge, skills, and competencies through formal, non-formal and/or informal learning to cope with the qualification expectations should they be allowed entrance into the qualification.

    RPL for exemption of modules:
  • An applicant may apply for RPL to be exempted for modules that form part of the qualification. For an applicant to be exempted from a module, the applicant needs to provide sufficient evidence in the form of a portfolio or via appropriate assessment methods that demonstrates that competency was achieved for the learning outcomes that are equivalent to the module's learning outcomes.

    Entry Requirements:
  • A Senior Certificate with endorsement.
    Or
  • National Senior Certificate granting access to Bachelor's Degree studies.
    Or
  • National Certificate (Vocational) Level 4 granting access to Bachelor's Degree studies.
    Or
  • A relevant qualification in the related field at NQF Level 5. 

  • RECOGNISE PREVIOUS LEARNING? 
    Y 

    QUALIFICATION RULES 
    This qualification comprises compulsory modules at NQF Levels 5, 6 and 7, totalling 435 Credits:
    (NQF Level 5 = 113 Credits, NQF Level 6 = 153 Credits, NQF Level 7 = 169 Credits)

    Year 1
    Compulsory Modules, Level 8, 130 Credits:
  • Surveying 1, 12 Credits.
  • Physical Sciences, 14 Credits.
  • Construction Materials Technology, 7 Credits.
  • Engineering Drawing, 7 Credits.
  • Professional and Technical Communication, 7 Credits.
  • Engineering Mathematics 1A, 14 Credits.
  • Engineering Mathematics 1B, 14 Credits.
  • Computer Technology, 10 Credits.
  • Applied Mechanics, 14 Credits.
  • Geology, 7 Credits.
  • Construction Methods, 7 Credits.
  • Soil Mechanics, 10 Credits.
  • Surveying 2, 7 Credits.

    Year 2
    Compulsory Modules, Level 8, 136 Credits:
  • Engineering Management, 10 Credits.
  • Engineering Mathematics 2, 14 Credits.
  • Structural Analysis 1, 14 Credits.
  • Structural Steel and Timber Design, 14 Credits.
  • Civil Engineering Documentation, 14 Credits.
  • Geotechnical Engineering, 14 Credits.
  • Transportation Engineering 1, 14 Credits.
  • Hydraulics 1, 14 Credits.
  • Hydrology, 14 Credits.
  • Structural Analysis 2, 14 Credits.

    Year 3:
  • Compulsory Modules, Level 8, 169 Credits:
  • Reinforced Concrete and Masonry Design, 14 Credits.
  • Project Management Theory, 14 Credits.
  • Research Methodology and Project, 14 Credits.
  • Applied Mathematics, 14 Credits.
  • Engineer in Society, 7 Credits.
  • Transportation Engineering 2, 14 Credits.
  • Water and Waste Water Engineering, 14 Credits.
  • Construction Materials Technology 2, 10 Credits.
  • Hydraulics 2, 14 Credits.
  • Urban Planning, 10 Credits.
  • Reticulation Design and Management, 10 Credits.
  • Solid Waste Management, 10 Credits.
  • Environmental Engineering, 14 Credits.
  • Integrated Technology Project, 10 Credits. 

  • EXIT LEVEL OUTCOMES 
    1. Apply civil engineering principles to diagnose and solve broadly defined problems.
    2. Apply mathematics, natural sciences and civil engineering sciences to practical problems.
    3. Perform design of civil engineering components and systems.
    4. Conduct investigations, tests, experiments and measurements of broadly defined civil engineering problems.
    5. Use appropriate engineering tools, technologies and information systems.
    6. Communicate effectively in a civil engineering environment.
    7. Analyse, evaluate, and manage impacts of engineering activity on the society, economy, industrial and physical environment.
    8. Understand and apply civil engineering management principles to one's own work, as a member and leader in a team to manage projects.
    9. Engage in independent and life-long learning through well-developed learning skills.
    10. Understand and apply ethical principles in civil engineering technology practice.
    11. Manage civil engineering projects. 

    ASSOCIATED ASSESSMENT CRITERIA 
    Associated Assessment Criteria for ELO 1:
  • Identify and define broadly defined civil engineering problems, articulating the scope, constraints, and relevance within the subdiscipline.
  • Locate, evaluate, and integrate relevant academic and technical literature to inform problem understanding and solution development.
  • Apply theory-based knowledge of natural sciences, mathematics, and statistics to support analysis and modelling of civil engineering problems.
  • Employ core civil engineering principles and subdiscipline-specific knowledge to develop and justify solutions to problems.
  • Use appropriate analytical, numerical, and computational tools (e.g., simulations, data analysis, modelling software) to explore and evaluate potential solutions.
  • Draw well-reasoned, evidence-based conclusions and critically evaluate the feasibility, limitations, and implications of proposed solutions.

    Associated Assessment Criteria for ELO 2:
  • Apply mathematics, statistics, and natural science principles to analyse and solve engineering problems, ensuring conceptual understanding.
  • Demonstrate theory-based understanding of core engineering principles and applies them to processes and systems.
  • Apply discipline-specific knowledge to develop, evaluate, or improve civil engineering designs and methodologies.
  • Use computing and numerical methods for modelling, simulation, and data-driven decision-making.
  • Construct and apply mathematical or computational models to analyse engineering systems logically.
  • Consider social, environmental, and interdisciplinary factors when applying scientific and engineering principles.

    Associated Assessment Criteria for ELO 3:
  • Identify and define the engineering design problem, including user needs, functional requirements, constraints, and performance criteria.
  • Generate and evaluate multiple design concepts or alternatives using appropriate methods and criteria to select the most suitable solution.
  • Apply relevant engineering principles, standards, and tools (e.g., CAD, simulations, calculations) to develop and refine the chosen design solution.
  • Incorporate principles of efficient resource use, environmental impact, whole-life cost, reusability, and net zero carbon into the design process.
  • Demonstrate awareness of and integrate public health, safety, cultural, and societal considerations into the design solution.
  • Document and communicate the design process, decisions, and rationale using appropriate formats (e.g., reports, drawings, presentations).

    Associated Assessment Criteria for ELO 4:
  • Define and scope broadly defined engineering problems by clearly articulating the problem statement, identifying relevant variables and constraints.
  • Locate, evaluate, and select relevant information from engineering codes and standards, databases and digital repositories, peer-reviewed literature and other credible sources.
  • Design and conduct experiments or investigations that are methodologically sound and aligned with the problem scope; apply appropriate research methods and tools.
  • Collect, process, and analyse data using appropriate statistical or computational tools; to critically evaluate data quality and reliability; to interpret trends, patterns, and anomalies.
  • Engage with current technological literature and apply critical thinking to: synthese information from multiple sources; evaluatie the implications of findings in context; demonstrate awareness of technological advancements and limitations.
  • Draw valid, evidence-based conclusions to: clearly communicate findings and their significance; recommend informed courses of action or further investigation; reflect on limitations and potential improvements.

    Associated Assessment Criteria for ELO 5:
  • Identify and apply the most suitable engineering techniques for solving broadly defined problems, with clear justification.
  • Utilise available resources (e.g., standards, guidelines, databases) to support engineering analysis and decision-making.
  • Apply modern engineering and IT tools (e.g., CAD, simulation software, computational packages) accurately and effectively to model and analyse engineering systems and processes.
  • Employ appropriate modelling techniques and predictive tools to evaluate system behaviour, performance, and outcomes under defined conditions.

    Associated Assessment Criteria for ELO 6:
  • Produce clear, well-organised, and technically accurate written work across varied formatsfrom short reports to long technical documentsusing appropriate tables, diagrams, and appendices suited to academic or professional contexts.
  • Deliver effective oral presentations on engineering topics to different audiences (peers, management, and the public), adapting tone, structure, and delivery to both academic and simulated professional settings.
  • Adjust communication methods to meet the needs of diverse audiences, considering cultural, linguistic, and learning differences, and ensuring information is inclusive, accessible, and easy to understand.
  • Employ standard engineering communication tools (drawings, specifications, design documents) and subject-specific outputs (simulations, specialised visualisations), ensuring clarity, accuracy, and relevance.
  • Communicate engineering concepts and outcomes clearly and responsibly to both professional and public audiences, translating technical information into accessible language suited to the audience's knowledge level.
  • Use appropriate academic and professional language, formatting, and referencing in both written and oral communication, meeting the standards expected in academic and simulated professional environments.

    Associated Assessment Criteria for ELO 7:
  • Demonstrate understanding of sustainability principles and their integration into engineering decisions.
  • Select and apply appropriate engineering techniques considering societal, environmental, and economic impacts.
  • Utilise relevant codes, standards, and sustainability frameworks to justify decisions.
  • Apply tools (e.g., CAD, simulation software) to model environmental and safety impacts.
  • Predict outcomes related to resource efficiency, environmental impact, and safety using appropriate modelling techniques.

    Associated Assessment Criteria for ELO 8:
  • Work independently, meet deadlines, and contribute meaningfully to team goals. Demonstrate self-motivation, accountability, and effective time management.
  • Engage respectfully with diverse team members, promote inclusion, and encourage participation. Show cultural and interpersonal awareness.
  • Adapt between leadership and support roles, leads ethically, and foster team cohesion. Share responsibility for outcomes.
  • Communicate clearly, listen actively, and adapt style to team needs. Use appropriate tools for face-to-face and remote settings; resolve misunderstandings constructively.
  • Identify and address conflicts constructively, maintain team harmony, and encourage feedback for improvement.
  • Reflect on personal and team performance, integrate feedback, and adjust behaviour to improve collaboration and professional growth.

    Associated Assessment Criteria for ELO 9:
  • Identify learning needs and independently acquire knowledge to address broadly defined engineering problems.
  • Locate and evaluate credible sources (journals, standards, databases) to support independent learning.
  • Apply appropriate engineering techniques and modern tools to learn independently to solve problems.
  • Reflect on learning outcomes, evaluate effectiveness, and adapt strategies for improvement.

    Associated Assessment Criteria for ELO 10:
  • Demonstrate knowledge of ethical principles, compliance with laws, and commitment to professional norms.
  • Work effectively in diverse teams, respecting different perspectives and promoting inclusivity.
  • Exhibit accountability, time management, and sound judgement in professional practice.
  • Recognise own strengths and weaknesses, seek help when needed, and engage in self-reflection for continuous improvement.

    Associated Assessment Criteria for ELO 11:
  • Apply fundamental economic principles such as cost estimation, budgeting, and cost-benefit analysis to engineering tasks and project decisions.
  • Utilise project management tools (e.g., Gantt charts, work breakdown structures, scheduling software) to plan, monitor, and control engineering projects.
  • Contribute effectively as a team member or leader in managing engineering projects, which includes task delegation, coordination, and communication.
  • Apply project management and finance principles in multidisciplinary settings, integrating knowledge from various fields to achieve project goals.
  • Identify, allocate, and manage resources (time, personnel, materials) and anticipate project risks, proposing appropriate mitigation strategies.
  • Evaluate the performance of the project in terms of scope, time, cost, and quality, and reflect on the financial and managerial decisions made throughout the project lifecycle.

    Integrated Assessment
    The Assessment Policy of the institution is governed by a wide range of principles, which include ensuring academic and professional standards in the assessments. The policy promotes both formative and summative assessments and ensures uniform administration and management of final assessments.

    Taking into consideration the above policy framework, the Faculty of Engineering practices a continuous assessment approach in evaluating student learning. This type of assessment will be conducted in this qualification. The continuous assessment is an on-going evaluation process which gives feedback on student learning through regular assessments. The type of assessment is both formative and summative and building towards a final integrated summative assessment. Within the qualification, a number of assessments will be conducted in each subject. Emphasis is placed on the use of authentic assessment in that it helps students to focus in demonstrating their ability to apply critical thinking skills and solve problems associated with Civil Engineering profession.

    Depending on the subject, integrated assessment takes the form of an appropriate variety of both summative and formative assessment methods for example: written and oral tests, problem solving assignments, projects, presentations, case studies, portfolios, and log books. These assessments ensure that all the ELO's are assessed in an integrated manner. The qualification will be awarded to a student who has provided evidence to the satisfaction of the assessors that the qualification, as detailed in the stated outcomes, has been achieved. Assessors vary the types of assessment tasks across a subject and programme. In this regard, each type of assessment has a percentage weighting of the total marks awarded to the subject.

    Integrated assessment in this qualification aims to achieve the following:
  • Assess the extent to which students can practice competently, effectively and safely in any of the Civil Engineering profession nationally and internationally.
  • Evaluate the extent to which students have integrated the professional roles, knowledge, practice,
  • and skills delivered through the learning outcomes of the subjects of this qualification.
    Provide opportunities to develop reflexive competence through reflection-in-action and reflection-on-action.

    Formative Assessment
    Formative assessment in the qualification aims to enhance learning by providing students with opportunities to critically reflect on their progress. This approach helps improve personal accountability and time management skills. The assessment tasks include problem-solving exercises, individual and group assignments, projects, class discussions, quizzes, reflective reports, and tutorial sessions, all tailored to the field of civil engineering.

    Summative Assessment
    Summative assessment occurs at the end of a section of work, quarter, or semester and evaluates students' achievements against the learning outcomes of the qualification. These assessments typically involve formal tasks such as written tests, reports, case studies, projects, and final tests, ensuring that students meet the required standards in the field of civil engineering. 

  • INTERNATIONAL COMPARABILITY 
    The qualification meets the educational requirements for Engineering Technologist programmes as defined under the Sydney Accord framework.
    The Bachelor of Engineering Technology in Civil Engineering is comparable in purpose, level and duration to Engineering Technologist qualifications in Australia, New Zealand and Canada. It aligns with the IEA Sydney Accord Graduate Attributes. It covers substantially similar disciplinary content and addresses broadly defined engineering problems consistent with international technologist-level standards. It also incorporates applied design, investigation, sustainability, ethics and project management as required internationally.

    Comparison Framework
    The South African qualification has been compared with internationally recognised standards and comparable qualifications in countries that are signatories to the International Engineering Alliance (IEA), particularly under the Sydney Accord, which governs Engineering Technologist qualifications.
    The comparison considered: IEA Graduate Attributes and Professional Competencies (Sydney Accord standard); exit level outcomes and associated assessment criteria; qualification type and purpose; duration and credit volume; curriculum structure and disciplinary coverage; level descriptors and professional outcomes.

    The qualification was compared with:
  • Bachelor of Engineering Technology (Civil), Australia - Accredited under Engineers Australia - Sydney Accord.
  • Bachelor of Engineering Technology in Civil Engineering, New Zealand - Accredited by Engineering New Zealand - Sydney Accord.
  • Bachelor of Engineering Technology (Civil Engineering Technology), Canada - Accredited under Engineers Canada Technology Accreditation framework.

    Comparison of Qualification Entry Requirements; Duration, and Level
    South Africa (this qualification):
    Entry requires a National Senior Certificate (NSC) with passes in Mathematics (60%) and Physical Science (60%). Universities typically set a minimum Admission Point Score (APS) of 36. English proficiency (60%) is also required. The qualification usually takes 3 years full-time and is classified at NQF Level 7.

    Australia:
    Applicants must have completed Year 12 (Australian secondary school) with satisfactory results in Mathematics and English. Some institutions also require Physics. International students must demonstrate English proficiency, usually with IELTS 6.0 (no band below 6.0). The program duration is 3-4 years full-time, with a strong practical focus.

    New Zealand:
    Entry requires University Entrance (UE) with NCEA Level 3, including Mathematics (Calculus) and Physics. International students must provide proof of English proficiency, typically IELTS 6.0 (no band below 6.0). The program is 3 years full-time, a Level 7 qualification. It is offered at institutions such as Manukau Institute of Technology, Unitec, and Wintec.

    Canada:
    Applicants need an Ontario Secondary School Diploma (OSSD) or equivalent, with Grade 12 English and Mathematics (Functions). Physics is often recommended. International students must provide proof of English proficiency (IELTS or TOEFL). Programs run for 3-4 years full-time. Some institutions offer Advanced Diplomas in Civil Engineering Technology, while others provide Bachelor of Engineering degrees (e.g., BCIT).

    Key observations:
  • Mathematics and Physics are universally required across all four countries.
    English proficiency tests (IELTS/TOEFL) are mandatory for international students in Australia,

    New Zealand, and Canada.
    South Africa uses the APS system tied to the National Senior Certificate.
    Canada distinguishes between Engineering Technology Diplomas and Bachelor of Engineering degrees, with different pathways to professional licensure.
    Australia & New Zealand emphasize practical, industry-linked training, while South Africa & Canada highlight professional registration pathways.

    Comparison of Qualification Type and Purpose
    South Africa:
    The Bachelor of Engineering Technology in Civil Engineering is a Higher Education Bachelor's Degree at NQF Level 7, accredited by the Council on Higher Education and endorsed by the Engineering Council of South Africa (ECSA). Its purpose is to equip students with knowledge, skills, and practical experience to function as competent civil engineering technologists. Graduates are prepared for careers in infrastructure development and can register with ECSA as Professional Engineering Technologists. It also provides a pathway to postgraduate study (NQF Level 8, e.g., Honours).

    Australia:
    The Bachelor of Engineering Technology (Civil) or related degrees (sometimes titled Bachelor of Science in Civil and Structural Engineering) are professional, practice-oriented qualifications accredited by Engineers Australia. They are offered by institutions such as University of Southern Queensland, Engineering Institute of Technology, and Melbourne Polytechnic. They emphasize hands-on skills, infrastructure design, construction, and maintenance. The purpose is to prepare graduates as civil engineering technologists who can work on roads, bridges, water systems, and other infrastructure projects. Programs are designed to be job-ready, with strong industry links and practical training.

    New Zealand:
    The Bachelor of Engineering Technology (Civil) is a Level 7, 360-credit qualification offered by institutions such as Unitec, Wintec, and Manukau Institute of Technology. It is designed in consultation with industry to ensure graduates are work-ready. The purpose is to train civil engineering technologists who apply mathematical, scientific, and engineering principles to infrastructure such as roads, bridges, harbours, and water systems. Students can specialise in areas like environmental, geotechnical, structural, transportation, or water engineering.

    Canada:
    Civil Engineering Technology programs (e.g., at RRC Polytech or Lethbridge Polytechnic) prepare graduates as engineering technologists, focusing on technical support, design, and applied problem-solving. These are accredited by Technology Accreditation Canada, ensuring workforce readiness and international recognition.
    Key Similarities and Differences:
    South Africa & New Zealand: The BEng Tech is a recognised bachelor's degree, focused on producing civil engineering technologists with pathways to professional registration.
    Australia: Like South Africa and NZ, but strongly emphasises industry readiness and practical training, accredited by Engineers Australia.
    Canada: The distinction is sharperBachelor of Engineering leads to licensure as a Professional Engineer, while Civil Engineering Technology diplomas prepare for technologist roles.

    Comparison of Duration and Credit Volume
  • South Africa (this qualification): 3-years duration; 435 credits; NQF Level 7.
  • Australia: 3-years duration; 240-360 credit points; AQF Level 7.
  • New Zealand: 3-years duration; 360 credits; NZQF Level 7.
  • Canada: 3-4 years duration; 120 credits; Level 7 equivalent.
    Similarities: all qualifications are typically completed over three years of full-time study; all are positioned at Level 7 on their respective national frameworks; credit volumes are comparable between Australia and New Zealand.

    Differences are notable in credit volumes. Credit volume for South Africa (this qualification) reflects its specific credit calculation model under the HEQSF. In South Africa, Australia and New Zealand, one credit is equivalent to 10 notional hours, however, Canada credits calculation model is different as the term "notional hours" is less commonly used in official academic regulations.

    Comparison of Exit Level Outcomes vs IEA Sydney Accord Graduate Attributes
    The qualification outcomes were compared directly with the IEA Sydney Accord Graduate Attributes.
  • Sydney Accord attribute on 'Application of knowledge' aligns with ELO 1 & 2 - Application of mathematics, science and engineering principles to practical problems in this qualification.
  • Sydney Accord attribute on 'Problem analysis' aligns with ELO 1 - Apply civil engineering principles to diagnose and solve broadly defined problems in this qualification.
  • Sydney Accord attribute on 'Design/development of solutions' aligns with ELO 3 - Perform design of civil engineering components and systems in this qualification.
  • Sydney Accord attribute on 'Investigation' aligns with ELO 4 - Conduct investigations, tests, experiments, measurements in civil engineering context in this qualification.
  • Sydney Accord attribute on 'Modern tool usage' aligns with ELO 5 - Use of appropriate engineering tools, technologies and information systems in this qualification.
  • Sydney Accord attribute on 'Environment and sustainability' aligns with ELO 7 - Analyse, evaluate, and manage impacts of engineering activity on the society, economy, industrial and physical environment in this qualification.
  • Sydney Accord attribute on 'Ethics' aligns with ELO 10 - Apply ethical principles in civil engineering technology practice in this qualification.
  • Sydney Accord attribute on 'Engineer and society' aligns with integrated ELO 3, 7 & 10 in this qualification.
  • Sydney Accord attribute on 'Individual and team work' aligns with ELO 8 - Manage civil engineering activities and teamwork in this qualification.
  • Sydney Accord attribute on 'Communication' aligns with ELO 6 - Communicate effectively in a civil engineering environment in this qualification.
  • Sydney Accord attribute on 'Project management and finance' aligns with ELO 8 & 11 - Manage civil engineering projects including planning and economic evaluation in this qualification.
  • Sydney Accord attribute on 'Lifelong learning' aligns with ELO 9 - Independent learning in this qualification.
    In general, this qualification's Exit Level Outcomes are substantially aligned with the Sydney Accord Graduate Attributes for Engineering Technologists. The qualification explicitly addresses broadly defined problems, applied design, and system-level implementation consistent with international standards.

    Comparison of Curriculum Content, Modules, and Knowledge Profiles
    Core knowledge areas of this qualification were compared with the Australian, New Zealand and Canadian Civil Engineering Technology programmes. Knowledge profiles typically include mix of mathematical science, natural science, engineering science, and applied design & synthesis in all the four countries.

    While each country's universities tailor their programmes to local accreditation bodies, the core curriculum overlaps significantly. Overlapping modules in a Bachelor of Engineering Technology (Civil Engineering) across South Africa, Australia, New Zealand, and Canada include:
  • Mathematical science (Engineering Mathematics, Applied Statistics, Numerical Methods, etc.).
  • Mechanics and Materials (Strength of Materials, Structural Analysis/Mechanics, Mechanics of Solids, Material Technology, Structural Engineering, etc.).
  • Fluid Mechanics & Hydraulics (Fluid Mechanics, Hydraulics, Hydrology, etc.).
  • Geotechnical Engineering (Soil Mechanics, Geotechnical Engineering, Foundation Engineering, etc.).
  • Transportation Engineering (Transportation Engineering, Transportation systems, Highway Engineering, Roading & Transportation Engineering, etc.).
  • Water & Environmental Engineering (Water Engineering, Water & Wastewater Engineering, Wastewater Treatment, Water Resources, Environmental Engineering, etc.).
  • Construction & Project Management (Construction Materials, Project Management, Construction Engineering/Management, Engineering Economics, etc.).
  • Surveying & GIS (Engineering Surveying, Surveying, Geomatics, etc.).
  • Design Projects & Capstone (Design Project, Civil/Capstone Design Project, etc.).
  • Professional Practice & Communication (Engineer in Society, Engineering Communication, Ethics, Engineering Practice, etc.)

    Key observations:
  • Mathematics, mechanics, and materials are universal foundations across all the four countries.
  • Hydraulics, geotechnical, and structural engineering form the technical backbone everywhere.
  • Surveying is emphasized in South Africa, New Zealand, and Canada, but sometimes integrated into broader design courses in Australia.
  • Environmental and sustainability focus is stronger in Australia and New Zealand, reflecting regional priorities.
  • Capstone projects are mandatory in all countries, ensuring practical application of theory.
  • Professional practice and ethics modules are included everywhere to meet accreditation standards (ECSA in South Africa, Engineers Australia, Engineering New Zealand, Engineers Canada).

    There are contextual differences in Civil Engineering Technology programmes across South Africa, Australia, New Zealand, and Canada. While the core modules are broadly similar (mathematics, mechanics, structures, water, geotechnics, transport, environment, surveying, and project management), the context in which they're taught and applied differs due to regional priorities, accreditation standards, and industry needs. In other words, they emphasize different themes across their programmes.
  • South Africa: Civil engineering programs emphasize water scarcity, drought management, and sanitation. The infrastructure focus is on bridging rural-urban gaps, with unique emphasis on mining-related geotechnical engineering.
  • Australia: Programmes highlight climate resilience, coastal engineering, and sustainability. Infrastructure priorities include large-scale transport systems and urban sprawl. Unique emphasis is placed on green building codes and renewable integration.
  • New Zealand: The focus is on seismic resilience, sustainability, and renewable energy. Infrastructure priorities include earthquake-resistant structures and roading. A unique emphasis is the integration of Maori cultural values into engineering practice.
  • Canada: Programmes emphasize cold climate engineering, permafrost, and freshwater systems. Infrastructure priorities include large-scale bridges, highways, and urban infrastructure. Unique emphasis is placed on Arctic engineering and winter construction methods.

    Comparison of assessments
    South Africa:
    Assessment methods consist of combination of coursework (formative and summative assessments), practical projects, laboratory work, and examinations. Capstone/Work-integrated learning often includes a final-year design project and industry-linked practical training. Purpose is to demonstrate competence in applying engineering principles, problem-solving, and professional judgment.

    Australia:
    Assessment methods consist of a mix of exams, assignments, group projects, and laboratory/practical work. Industry engagement has strong emphasis on hands-on learning, with assessments often tied to real-world civil engineering problems. Capstone project typically required in the final year, focusing on design and construction challenges.

    New Zealand:
    Assessment methods consist of coursework (formative and summative assessments), practical labs, design projects, and examinations. Specialization strands - students may be assessed in areas such as structural, water/wastewater, or transportation engineering. Capstone project - a major design project in the final year, often industry-linked.

    Canada:
    Assessment methods vary by institution.
    Bachelor of Engineering (Civil): Heavy emphasis on exams, design projects, labs, and management-focused assessments. Includes a capstone design project.
    Civil Engineering Technology Diplomas: More applied, with assessments based on technical labs, co-op placements, and applied projects.
    Key Similarities and Differences
    South Africa & New Zealand: Assessments emphasize on coursework (formative & summative assessments) applied projects and industry-linked capstones, aligned with technologist registration.
    Australia: Strong focus on practical, industry-driven assessments, ensuring graduates are job-ready.
    Canada: Dual pathwayBEng programs emphasize professional engineering readiness, while technology diplomas focus on applied technical competence.

    Comparison of articulation
    South Africa:
    Articulation to higher study: Graduates can progress to Bachelor of Engineering Honours (NQF Level 8) or postgraduate diplomas, and eventually Master's degrees.
    Australia:
    Articulation to higher study - Graduates may articulate into Bachelor of Engineering (Honours) programs, often with credit recognition for prior study.
    New Zealand: Articulation to higher study - The BEngTech (Civil) is a Level 7 qualification. Graduates can progress to postgraduate study (e.g., Master of Engineering or Master of Engineering Studies).
    Canada: Articulation to higher study - Civil Engineering Technology Diplomas graduates can articulate into Bachelor of Engineering Technology or Bachelor of Engineering programs, often with advanced standing. Bachelor of Engineering (Civil) graduates leads directly to postgraduate study (Master's, PhD).
    Key Similarities and Differences:
    South Africa, Australia, New Zealand: The BEngTech is a bachelor's degree designed for engineering technologist registration, with clear articulation into postgraduate study.
    Canada: Distinction between technology diplomas (Sydney Accord, technologist roles) and engineering degrees (Washington Accord, professional engineer licensure).

    Comparison against International Standards
    The qualification was evaluated against:
  • IEA Sydney Accord Graduate Attributes (Engineering Technologist level)
  • National Qualifications Framework Level 7 descriptors (AQF, NZQF comparison)
  • Outcome-based engineering accreditation standards used by Engineers Australia and Engineering New Zealand.

    Key Areas of International Standard Alignment:
    International Standard Requirement ¿ Alignment in This Qualification
  • Broadly defined problem solving ¿ Explicitly defined in ELO 1
  • Applied design competence ¿ Explicitly defined in ELO 3
  • Investigation and experimentation ¿ Explicitly defined in ELO 4
  • Modern engineering tools ¿ Explicitly defined in ELO 5
  • Professional ethics ¿ Dedicated ELO 10
  • Sustainability ¿ Integrated in ELO 3 & 7
  • Project management ¿ Embedded in ELO 8 & 11

    Conclusion: The qualification meets the educational requirements for Engineering Technologist programmes as defined under the Sydney Accord framework. 

  • ARTICULATION OPTIONS 
    This qualification allows possibilities for both vertical and horizontal articulation.

    Horizontal Articulation:
  • Bachelor of Engineering Technology in Chemical Engineering, NQF Level 7.
  • Advanced Occupational Diploma: Building Engineering Inspector, NQF Level 7.

    Vertical Articulation:
  • Bachelor of Engineering Technology Honours in Civil Engineering, NQF Level 8.

    Diagonal Articulation:
  • Advanced Occupational Diploma: Building Engineering Inspector, NQF Level 7. 

  • MODERATION OPTIONS 
    N/A 

    CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    N/A 

    NOTES 
    N/A 

    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Cape Peninsula University of Technology 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.