SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Over-wrap cigarette packet and fill display unit 
SAQA US ID UNIT STANDARD TITLE
116955  Over-wrap cigarette packet and fill display unit 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner who has achieved this unit standard will be competent in:

Over-wrapping cigarette packets and filling display units to ensure availability for the case filling process. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
To enter a learning programme for this unit standard or to be assessed against this unit standard, the learner is assumed to have :

Literacy and numeracy at NQF level 1
Knowledge of the application of quality control on the final product
Knowledge of preparing a cigarette packet over-wrapper and display filling unit for production
Introduction to the Tobacco Processing Industry. 

UNIT STANDARD RANGE 
The learner is expected to perform the specific outcomes as reflected in this unit standard with minimal supervision, but with access to work-site procedures and operating instructions

The scope of this unit standard deals with the over-wrapping of packets and filling of display units after the preparing of the over-wrapper and filling unit and before shutdown

Material includes, but is not limited to, packets, tear tape, film wrap, display blanks and adhesive

Equipment includes, but is not limited to, adhesive pot bushes, adhesive applicators, folders, code blocks, heaters,
conveyer belts and suction cups. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Commence over-wrapping and display unit filling. 
OUTCOME NOTES 
  • Ensuring that all safety and quality detector systems are functional according to work site procedures
  • Starting the machine according to operating procedures 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See unit standard Notes for Assessment Criteria. 

    SPECIFIC OUTCOME 2 
    Maintain over-wrapping and filling process. 
    OUTCOME NOTES 
  • Monitoring the over-wrapping and filling process according to quality and operating procedures
  • Taking corrective measures and resuming over-wrapping and filling according to operating procedures
  • Maintaining material supply according to work site procedures
  • Maintaining the cleanliness of equipment during over-wrapping and filling according to work site procedures
  • Attending to blockages during over-wrapping and filling according to work site procedures
  • Recording all relevant over-wrapping and filling quality data according to work site procedures
  • Reporting deviations on machine components according to work site procedures. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See unit standard Notes for Assessment Criteria. 

    SPECIFIC OUTCOME 3 
    Complete over-wrapping and filling process. 
    OUTCOME NOTES 
  • Stopping over-wrapping and filling machine according to work-site procedures
  • Running-out material according to work site procedures
  • Finalizing relevant documentation according to work site procedures 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See unit standard Notes for Assessment Criteria. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.

    Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.

    Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Knowledge of control systems and settings on the over-wrapping unit.
    Knowledge of rectifying quality deviations.
    Knowledge of the application of safety measures and associated risks relating to the over-wrapping and filling equipment.
    Knowledge of the concepts efficiency, waste, and production cost as applied to the over-wrapping and filling equipment. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identifying and solving problems in which responses display that responsible decisions using critical and creative thinking have been made when monitoring the over-wrapping process when deviations and non-conformatories occur. 

    UNIT STANDARD CCFO WORKING 
    Working effectively with others as a member of a team when attending to quality deviations. 

    UNIT STANDARD CCFO ORGANISING 
    Organizing and managing oneself and one's activities responsibly and effectively when maintaining over-wrapping and filling process. 

    UNIT STANDARD CCFO COLLECTING 
    Collecting, analyzing, organizing and critically evaluating information when comparing production data against targets. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicating effectively using language skills in the modes of oral and/or written persuasion during the over-wrapping process when reporting deviations. 

    UNIT STANDARD CCFO SCIENCE 
    Using science and technology effectively and critically, showing responsibility towards the environment and health of others when utilizing the over-wrapping and filling equipment. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Assessment criteria

    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Consequences are explained in the event of not:
  • Continuously monitoring the over-wrapping and filling process for deviations
  • Maintaining the continuous application of materials and equipment
  • Recording correct quality and production data
  • Ensuring that all safety protective systems are functional
  • Reporting deviations on machine components
  • Attending to blockages during production
  • Taking immediate corrective actions to rectify quality deviations

    The purpose of the following are explained:
  • Maintaining the cleanliness of equipment during production

    Values
    All learners should demonstrate :

    An application of company ethics, values as well as general safety and customer care principles.
    An awareness of expectations and obligations of basic worker / management relationships. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49078   National Certificate: Cigarette Packaging  Level 3  NQF Level 03  Reregistered  2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.