SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Explain the planning and scheduling of tasks in a production environment 
SAQA US ID UNIT STANDARD TITLE
116218  Explain the planning and scheduling of tasks in a production environment 
ORIGINATOR
SGB Primary Agriculture 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Primary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2015-07-01  2018-06-30  SAQA 10105/14 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2019-06-30   2022-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The learner achieving this unit standard will be able to understand the use of day to day planning and scheduling for optimal production in the agricultural processing environment. The learner will also be able to make useful inputs in the planning and scheduling process. In addition they will be well positioned to extend their learning and practice into other areas of agriculture and management, creating a valuable human resource within the agricultural sector.

Learners will understand the importance of the application of business principles in agricultural production with specific reference to production/conversion.

They will be able to operate farming practices as businesses and will gain the knowledge and skills to move from a subsistence orientation to an economic orientation in agriculture. Farmers will gain the knowledge and skills to access mainstream agriculture through a business-orientated approach to agriculture. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
It is assumed that a learner attempting this unit standard will demonstrate competence against the unit standards or equivalent:
  • NQF 2: Define and understand production systems and production management. 

  • UNIT STANDARD RANGE 
    Whilst range statements have been defined generically to include as wide a set of alternatives as possible, all range statements should be interpreted within the specific context of application.

    Range statements are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity. These are only as a general guide to scope and complexity of what is required. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain production planning and the different levels of planning that can be used in production planning activities. 
    OUTCOME RANGE 
    Production planning refers to but is not limited to the choices between enterprises and processes, inputs, processing processes, markets and standards, etc. to which the final product should comply. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The different levels of planning encountered in the agricultural production process is described. 
    ASSESSMENT CRITERION RANGE 
    Types of planning referred to include but are not limited to short- (operational), medium- (tactical), and long-term (strategic) production planning.
     

    ASSESSMENT CRITERION 2 
    Enterprise and product options are described. 
    ASSESSMENT CRITERION RANGE 
  • Enterprise refer to but is not limited to the different products that can be produced.
  • Products refer to but is not limited to the end results after the conversion process.
     

  • ASSESSMENT CRITERION 3 
    Factors influencing the planning process are explained. 

    ASSESSMENT CRITERION 4 
    The relationship between income and expenditures, costing, budgeting are explained. 
    ASSESSMENT CRITERION RANGE 
    Only the basic definitions and relations need to be address.
     

    SPECIFIC OUTCOME 2 
    Demonstrate an understanding of scheduling. 
    OUTCOME RANGE 
    Scheduling refers to but is not limited to the day-to-day activity planning of the various production processes. Activities refer to but are not limited to the timely usage of the specific inputs, processes and outputs scheduled such as planting dates, fertilising, pruning, harvesting, feeding, mating periods, vaccinations, selling, etc. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Scheduling is explained. 

    ASSESSMENT CRITERION 2 
    The different scheduling techniques are described. 

    ASSESSMENT CRITERION 3 
    Forward and backward scheduling is described. 

    ASSESSMENT CRITERION 4 
    The importance of control over schedules is explained. 

    SPECIFIC OUTCOME 3 
    Demonstrate production optimisation techniques. 
    OUTCOME RANGE 
    Optimising techniques include but are not limited to the recording of parameters related to inputs, processes and output, basic analysis and adaptation thereof. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    An understanding of the recording of agricultural inputs and the measurement against parameters and goals are demonstrated. 

    ASSESSMENT CRITERION 2 
    An understanding of the recording of agricultural production and process data and the measurement against goals is demonstrated. 
    ASSESSMENT CRITERION RANGE 
    Data include but are not limited to process and production environmental data such as temperature, growth ratios, feed and fertiliser conversion schedules, etc.
     

    ASSESSMENT CRITERION 3 
    The ability to record agricultural production output data and measure it against parameters and goals is demonstrated. 

    ASSESSMENT CRITERION 4 
    The basic ability to statistically analyse recorded data and to analyse productivity of agricultural processes based on the analysis is demonstrated. 

    ASSESSMENT CRITERION 5 
    The ability to adapt agricultural inputs and processes to achieve required output is demonstrated. 

    SPECIFIC OUTCOME 4 
    Demonstrate the ability to make meaningful comments on the planning and scheduling process. 
    OUTCOME RANGE 
    Comment may be made but is not limited to the timely usage of the specific inputs, processes and outputs scheduled such as planting dates, fertilising, pruning, harvesting, feeding, mating periods, vaccinations, selling, etc. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    An understanding of production planning is demonstrated. 

    ASSESSMENT CRITERION 2 
    An understanding of scheduling by making useful inputs with regard to the activities and timeframes, in the planned schedule is demonstrated. 

    ASSESSMENT CRITERION 3 
    The implementation of various management decisions regarding planning, implementing and optimisation agricultural production processes is demonstrated. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The assessment of qualifying learners against this standard should meet the requirements of established assessment principles.

    It will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which the qualifying learners are working. These activities and tools may include an appropriate combination of self-assessment and peer assessment, formative and summative assessment, portfolios and observations etc.

    The assessment should ensure that all the specific outcomes, critical cross-field outcomes and essential embedded knowledge are assessed.

    The specific outcomes must be assessed through observation of performance. Supporting evidence should be used to prove competence of specific outcomes only when they are not clearly seen in the actual performance.

    Essential embedded knowledge must be assessed in its own right, through oral or written evidence and cannot be assessed only by being observed.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a qualifying learner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a qualifying learner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, then thy should not be assessed as competent.

    Evidence of the specified critical cross-field outcomes should be found both in performance and in the essential embedded knowledge.

    Performance of specific outcomes must actively affirm target groups of qualifying learners, not unfairly discriminate against them. Qualifying learners should be able to justify their performance in terms of these values.
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard or assessing this unit standard must be accredited as a provider with the relevant ETQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The person is able to demonstrate a basic knowledge of:
  • The procedures to follow with production planning and scheduling.
  • The purpose of production planning and scheduling.
  • The various production methods encountered in agricultural processing.
  • Basic statistics.
  • Basic presentation skills.
  • Basic meeting procedure.
  • Scheduling techniques.
  • Planning methodologies.
  • Interpersonal relations.
  • The purpose of learning about production / conversion planning.
  • Data recording and analysis techniques. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Problem solving relates to all specific outcomes. 

    UNIT STANDARD CCFO WORKING 
    Teamwork relates to all specific outcomes. 

    UNIT STANDARD CCFO ORGANISING 
    Self-organisation and management relates to all specific outcomes. 

    UNIT STANDARD CCFO COLLECTING 
    Information evaluation relates to all specific outcomes. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communication relates to all specific outcomes. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology relates to all specific outcomes. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Inter-relatedness of systems relates to all specific outcomes. 

    UNIT STANDARD CCFO CONTRIBUTING 
    Self-development relates to all specific outcomes. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49048   National Certificate: Animal Production  Level 3  NQF Level 03  Reregistered  2018-06-30  AgriSETA 
    Core  57877   National Certificate: CNC Production Machining  Level 3  NQF Level 03  Reregistered  2018-06-30  MERSETA 
    Core  49052   National Certificate: Plant Production  Level 3  NQF Level 03  Reregistered  2018-06-30  AgriSETA 
    Core  58785   National Certificate: Production Technology  Level 3  NQF Level 03  Reregistered  2018-06-30  MERSETA 
    Elective  58862   National Certificate: Electro-Mechanical Winding  Level 3  NQF Level 03  Reregistered  2018-06-30  MERSETA 
    Elective  59365   National Certificate: Freight Forwarding and Customs Compliance  Level 3  NQF Level 03  Reregistered  2018-06-30  TETA 
    Elective  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Reregistered  2018-06-30  As per Learning Programmes recorded against this Qual 
    Elective  58779   Further Education and Training Certificate: Production Technology  Level 4  NQF Level 04  Reregistered  2018-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Balemi Consulting Pty Ltd 
    2. Barloworld South Africa (Pty) Ltd T/A Barloworld-Equipment (ISANDO) (T 
    3. Bathopele HR and Management Consultants 
    4. Black Eagle Training (PIETERMARITZBURG) (TP) 
    5. Boikgantsho Consulting & Events 
    6. Bumunhu Services Providers Cc 
    7. Career Pathing Solutions (Pty) Ltd (KRUGERSDORP) (TP) 
    8. Cedara College of Agriculture 
    9. Centre for Logistics Excellence (Pty) Ltd 
    10. Coastal Kzn F.E.T. College - Umbumbulu Campus 
    11. College of Production Technology 
    12. CREATIVE FOUNDATION TRAINING 
    13. Elsenburg Agricultural Training Institute 
    14. Gijima Holdings (Pty) Ltd T/A Industrial Skills Development - Middelb 
    15. Global Maritime Legal Solutions (Pty) Ltd 
    16. HV Consultants (Pty) Ltd (PORT ELIZABETH) (TP) 
    17. Impact Plus Training Consultants 
    18. Izizwe Training Centre (Pty) Ltd T/A Simtech Training (NORTHDENE) (TP) 
    19. JESUA CONSULTANTS (Hartenbos) (WA) 
    20. Jesua Consultants (Pty) Ltd (MOSSEL BAY) (TP) 
    21. KayDee Project Management Cc 
    22. Keewave Trading 403 (Pty) Ltd T/A VH Consulting (DURBAN) (TP) 
    23. KMK Training Services (PTY) Ltd 
    24. Learning Exchange Pty (Ltd) 
    25. Leruo ke Matla Training and Enterprise Development Services 
    26. MacSteel Services Centres SA (WADEVILLE) (TP) 
    27. Mananthatshema Skills Dev. Centre 
    28. Matotomana Training & Gen Trading 
    29. Mercedes Benz South Africa (Pty) Ltd (CENTURION) (TP) 
    30. Mercedes Benz South Africa (Pty) Ltd (EAST LONDON) (TP) 
    31. Mobile Agri Skills Development and Training NPC 
    32. Morwa Agri-development cc 
    33. Mvelo Consultant 
    34. National Institute For The Deaf 
    35. Northlink College - Wingfield Campus 
    36. OPTIMUM LEARNING TECHNOLOGIES (PTY) LTD 
    37. Organisation Development International (Pty) Ltd (CENTURION) (TP) 
    38. Organisational Development International (TP) 
    39. P and R Development and Training (Pty) Ltd 
    40. Production Management Institute of Southern Africa (PMI) 
    41. Production Management Institute of Southern Africa (PMI) - Johannesburg 
    42. Production Management Institute of Southern Africa - Durban 
    43. QTE Training & Consulting cc T/A QTE (GERMISTON) (TP) 
    44. Rema Tip Top SA (Pty) Ltd (BENONI) (TP) 
    45. Scaw Metals Group (Pty) Ltd T/A Scaw Metals (DINWIDDIE) (TP) 
    46. School of Shipping 
    47. Sekhukhune FET College - Central Office 
    48. Setlakala Business Development 
    49. Skills Fusion 
    50. SSS Sheet Metal Work cc T/A Sheetech SA (DURBAN) (TP) 
    51. Suidwes Beleggings Eiendoms Beperk 
    52. THE SAJ COMPETENCY TRAINING INSTITUTE CC 
    53. Tompi Seleka Agricultural College 
    54. Toyota Academy Toyota SA Motors (Pty) Ltd (ISIPINGO) (TP) 
    55. TPN Training and Recruitment cc 
    56. Training Force (Pty) Ltd 
    57. Tripple R Training Provider 
    58. Vari Consulting 
    59. Wavelength T.T.I 
    60. Wilbat Projects 148 (Pty) Ltd (ISIPINGO) (TP) 
    61. World Focus 382 cc T/A Richards Bay Technical Training & Assessment Centre (ZCBF) (RICHARDS BAY) (TP) 
    62. Y3K Training cc (CAPE TOWN) (TP) 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.