SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Sample and evaluate a mixture of coal dust and stone dust 
SAQA US ID UNIT STANDARD TITLE
115103  Sample and evaluate a mixture of coal dust and stone dust 
ORIGINATOR
SGB Occupational Health and Safety 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 09 - Health Sciences and Social Services Preventive Health 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular-Fundamental  Level 2  NQF Level 02  3 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2007-08-07  2008-11-26  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-11-26   2012-11-26  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
259658  Sample and evaluate a mixture of coal dust and stone dust  Level 2  NQF Level 02  3   

PURPOSE OF THE UNIT STANDARD 
This unit standard requires learners to be able to sample and evaluate a mixture of coal dust and stone dust to evaluate the content. Learners credited with this unit standard are capable of:
  • Describing the specified requirements pertaining to the sampling and evaluating a mixture of coal dust and stone dust.
  • Preparing to sample mixtures of coal dust and stone dust.
  • Collecting coal dust and stone dust mixture samples.
  • Evaluating coal dust and stone dust mixture samples.
  • Performing post coal dust and stone dust mixture sampling activities. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The ability to read, write and communicate at ABET level 4, or equivalent, will facilitate better understanding and proficiency in this unit standard. The learner must be able to distinguish between the colours relevant for the analysis. 

    UNIT STANDARD RANGE 
    Specific range statements are provided in the body of the Unit Standard where they apply to particular specific outcomes or assessment criteria. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Describe the specified requirements pertaining to the sampling of a mixture of coal dust and stone dust. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Explanation of stone dust and stone dusting is consistent with specified requirements. 

    ASSESSMENT CRITERION 2 
    The description and explanation of the principle of stone dusting, is consistent with scientific data contained in specified requirements. 

    ASSESSMENT CRITERION 3 
    The importance of sampling is explained in terms of the consequences to safety. 

    ASSESSMENT CRITERION 4 
    The methods of sampling of a mixture of coal dust and stone dust are explained in terms of specified requirements. 

    ASSESSMENT CRITERION 5 
    Explanation of adherence to the scheduled sampling program is in accordance with specified requirements. 

    SPECIFIC OUTCOME 2 
    Prepare to sample. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The selection of the sampling site, from the scheduled program, is explained in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    The examination and use of personal protective equipment is consistent with specified requirements. 

    ASSESSMENT CRITERION 3 
    The importance of examining and correctly using the above is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 4 
    The examination of tools and equipment is consistent with specified requirements. 

    ASSESSMENT CRITERION 5 
    The importance of examining the above is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 6 
    Permission is obtained to enter the workplace and is consistent with specified requirements. 

    ASSESSMENT CRITERION 7 
    The dangers of entering a workplace without obtaining permission are explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 8 
    The workplace is examined and hazards and risks, pertaining to health and safety, are dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 9 
    The importance of dealing with hazards and risks is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 10 
    The preparation work is performed in a manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 3 
    Collect sample. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The locations where coal and stone dust mixtures are to be sampled are identified in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    Coal and stone dust mixtures are sampled according to specified requirements. 

    ASSESSMENT CRITERION 3 
    The importance of complying is explained in terms of the consequences to safety. 

    ASSESSMENT CRITERION 4 
    The immediate vicinity is continuously assessed and hazards and risks pertaining to health and safety are dealt with according to specified requirements. 

    ASSESSMENT CRITERION 5 
    The importance of dealing with hazards and risks is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 6 
    Tools and equipment are used according to design and without injury to self and others. 

    ASSESSMENT CRITERION 7 
    The sampling is conducted in a manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 4 
    Evaluate samples. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Equipment is used according to design and without injury to self and others. 

    ASSESSMENT CRITERION 2 
    Coal and stone dust mixtures are evaluated according to specified requirements. 

    ASSESSMENT CRITERION 3 
    The importance of compliance is explained in terms of the consequences to safety. 

    ASSESSMENT CRITERION 4 
    The immediate vicinity is continuously assessed and hazards and risks pertaining to health and safety are dealt with according to specified requirements. 

    ASSESSMENT CRITERION 5 
    The importance of dealing with hazards and risks is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 6 
    The evaluation is conducted in a manner that fosters teamwork and avoids conflict. 

    SPECIFIC OUTCOME 5 
    Perform post-sampling activities. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Tools and equipment are cleaned in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    Defective tools and equipment are dealt with in a manner consistent with specified requirements. 

    ASSESSMENT CRITERION 3 
    The importance of dealing with the above is explained in terms of the consequences to health and safety. 

    ASSESSMENT CRITERION 4 
    The sample is dealt with according to specified requirements. 

    ASSESSMENT CRITERION 5 
    Reports are complete, accurate, in the required format, and submitted to designated personnel on time. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Assessment of learner achievements takes place at providers accredited by a relevant ETQA (RSA, 1998b) for the provision of programmes that result in the outcomes specified for this Unit Standard. Anyone assessing a learner against this Unit Standard must be registered as an assessor with a relevant ETQA. Any institution offering learning that will enable achievement of this Unit Standard must be accredited as a provider with a relevant ETQA. The relevant ETQA according to the moderation guidelines and the agreed ETQA procedures will oversee moderation of assessment and is responsible for moderation of learner achievements of learners who meet the requirements of this Unit Standard. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge will be assessed through assessment of the specific outcomes in terms of the stipulated assessment criteria. Learners are unlikely to achieve all the specific outcomes, to the standards described in the assessment criteria, without knowledge of the listed embedded knowledge. This means that for the most part, the possession or lack of the knowledge can be directly inferred from the quality of the learner's performance. Where direct assessment of knowledge is required, assessment criteria have been included in the body of the Unit Standard.

    Credited learners understand and can explain:
  • Types of detection and measurement methodologies for mixture of coal and stone dust data.
  • Limitations of various detection and measuring methodologies.
  • Effects that mixture of coal and stone dust data have on the health and safety of people
  • Importance of evaluating mixture of coal and stone dust data.
  • Circumstances that necessitate evaluating mixture of coal and stone dust data.
  • Use of instruments and accessories.
  • Instruments' and their accessories' principle of operation, range, use and limitations.
  • Importance of examining and calibrating instruments.
  • Safe handling and use of specified instruments.
  • Consequences for health, safety and productivity of dealing with defective and used equipment, continuously assessing health and safety hazards and risks, dangers of accessing sites without meeting access requirements, examining and correctly using personal protective equipment, testing for gas according to specified requirements, compliance with exposure levels, dealing with conditions, environmental factors, and limitations that can influence readings, evaluating test results and taking appropriate action.
  • Occupational exposure limits and limits for mixture of coal and stone dust data.
  • Action to be taken when mixture of coal and stone dust data are encountered outside legal levels.
  • Conditions, environmental factors, and limitations that can influence readings. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Solve problems related to the detection, analysis, and recording of mixture of coal and stone dust data by implementing remedial and preventative measures. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team/group/organisation/community by accepting, interpreting and delegating instructions correctly, if and when required, in a context-appropriate manner. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively by meeting specified requirements, recording test results in specified formats, and taking appropriate action where necessary. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, organise and critically evaluate information to correct for conditions, environmental factors, and limitations that can influence readings, interpret information obtained, and take appropriate action. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematics and language skills in the modes of oral and written presentations to record and report test results. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically (showing responsibility towards the environment and health of others) to select the appropriate methods and instruments for testing for mixture of coal and stone dust data. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by taking appropriate actions based on the evaluation of test results and reporting results to relevant designated persons, confirming that a specific observation, inference, action or decision can have an interrelated effect. 

    UNIT STANDARD ASSESSOR CRITERIA 
    Assessors should keep the following principles in mind when designing and conducting assessments against this Unit Standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the learner competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the learner is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this Unit Standard, that the learner can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent. 
    		•

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 259658, which is "Sample and evaluate a mixture of coal dust and stone dust", Level 2, 3 credits.

    Legal requirements:

    Specified requirements include legal requirements and are contained in one or more of the following documents:
  • OHS Act and Regulations 85/1993
  • Mine Health and Safety Act and Regulations 29/1996
  • Guideline for mandatory Codes of Practice


    Site-specific requirements:

    Specified requirements include site-specific requirements and are contained in one or more of the following documents:
  • Managerial instructions
  • Codes of Practice
  • Company Standards
  • Standard Task Procedures
  • Health Management Program
  • Risk Assessment Documentation
  • Working Guides
  • Manufacturers' specifications 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48804   National Certificate: Occupational Safety, Hygiene and Environment  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2008-11-26  Was HW SETA until Last Date for Achievement 
    Elective  79806   National Certificate: Occupational Hygiene and Safety  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. MODIKWA MINING PERSONNEL SERVICES PTY L TD 
    2. Nokaneng Environmental Management Consulting 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.