SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate understanding of basic production operations in a wood products environment 
SAQA US ID UNIT STANDARD TITLE
117222  Demonstrate understanding of basic production operations in a wood products environment 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who can demonstrate an understanding of the basic production operation in the relevant wood products environment. People credited with this unit standard are able to:
  • Explain the main purpose of the organisation's operation.
  • Explain the general layout of the plant.
  • Explain the sequence of the production phases in the production process.
  • Explain the general functions of the major production equipment and stages in the operation. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    There is open access to this unit standard. Learners should be competent in communication and mathematical Literacy at ABET 3. 

    UNIT STANDARD RANGE 
    (Choose from one of the following:) Wood Preservation, Tannin Extraction, Trusses, Charcoal Manufacture, Match Manufacture, Bulk Bin, Box and Pallet Repair and Manufacture, Veneer and Plywood, Fibreboard and Chipboard.

    The scope of this Unit Standard covers:
  • The environment which can be described as the relevant wood product plant with all its equipment and the correct sequence of the production phases.
  • The spread of raw material processed and products produced by the operation.
  • The people involved in the various workplaces.

    The context of this Unit Standard relates to the training of a Learner at NQF Level 1 in a wood products manufacturing activity.

    The Level assigned to this Unit Standard, i.e. Level 1, is appropriate because it entails the training of a novice in a wood products manufacturing environment and is a progression of the skills acquired from Levels 1 to 3. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the main purpose of the organisation's operation. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The explanation proves that the main purpose of the relevant operation is known and understood. 

    ASSESSMENT CRITERION 2 
    The explanation is given using the correct industry terminology as per work instructions. 

    SPECIFIC OUTCOME 2 
    Explain the general layout of the plant. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The explanation proves that the basic lay out of the relevant operation, is known and understood as per work instructions. 

    ASSESSMENT CRITERION 2 
    The explanation is given using the correct industry terminology. 

    SPECIFIC OUTCOME 3 
    Explain the sequence of the production phases in the production process. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The explanation proves that the sequence of the relevant production stages in the process is known and understood. 

    ASSESSMENT CRITERION 2 
    The explanation is given using the correct industry terminology. 

    SPECIFIC OUTCOME 4 
    Explain the general functions of the major production equipment and stages in the operation. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The explanation proves that the general functions of the major production equipment and stages in the relevant operation are known and understood. 

    ASSESSMENT CRITERION 2 
    The explanation is given using the correct terminology. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA.
  • Moderators must be registered as assessors with the relevant ETQA.
  • Training providers must be accredited by the relevant ETQA.
  • Moderation should include both internal and external moderation where applicable.
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:
  • Communication and mathematical skills equivalent to NQF Level 1 requirements.
  • A basic knowledge of the relevant wood products operation.
  • The production phases, equipment and tools of the operation. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and verbally report problems detected in the production process to the relevant person/s. 

    UNIT STANDARD CCFO WORKING 
    Work effectively and efficiently as a team member in this work area. 

    UNIT STANDARD CCFO COLLECTING 
    Deliver, collect, clean and store tools and instruments utilized in the relevant workplace. 

    UNIT STANDARD CCFO COMMUNICATING 
    Listen and understand instructions and verbally report in an effective manner to the relevant person/s in this work area. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Outcomes that Learners achieve will be judged subject to these being achieved:
  • Within the standard time prescribed by the organisation.
  • While following all the safety procedures required by the OSHACT and the workplace.
  • Strictly according to the organisation's work place procedures.

    Values:

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 
    		•

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Imara Umbono Incorporated (Pty) Ltd 
    2. Optimi Workplace 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.