SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Debark timber 
SAQA US ID UNIT STANDARD TITLE
117265  Debark timber 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 1  NQF Level 01 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who operate a debarking machine, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.

People credited with this unit standard are able to:
  • Check and start up the machine
  • Feed logs into the machine
  • Debark the logs
  • Shut down the machine
  • Clean the machine 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Competency in communication skills equivalent to that of a person who has qualified in these subjects at an ABET level 3;
  • An understanding of the basic activities of the match manufacturing production process in their workplace;
  • Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 1 requirements. 

  • UNIT STANDARD RANGE 
    The scope of the Unit Standard covers:
  • The whole environment that can be described as match manufacturing.
  • All the personnel involved in all activities of match manufacturing.
  • All the material that is handled and processed in this work area of match manufacturing.
  • All the company's work procedures and safety regulations relating to this work area of match manufacturing.
  • All the relevant OSHACT stipulations, which have bearing on, match manufacturing and all other activities in this work area.

    The context of the Unit Standard relates to the training of a Learner at NQF level 1 in the activity of match manufacturing.

    The level assigned to this Unit Standard, i.e. Level 1, is appropriate because it entails the training of a novice in match manufacturing is a progression of the skills acquired from Levels 1 to 4. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Check and start up the machine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The hydraulic oil level is checked and topped up if required before starting up as per work instructions. 

    ASSESSMENT CRITERION 2 
    The locking bar is removed from the debarker. 

    ASSESSMENT CRITERION 3 
    The machine is switched on as per work instructions. 

    ASSESSMENT CRITERION 4 
    The ramp teeth are checked to ensure that they move up the ramp. 

    ASSESSMENT CRITERION 5 
    The ramp out-feed conveyor is checked to ensure that it moves forward and backward. 

    ASSESSMENT CRITERION 6 
    The in-feed conveyor is checked to ensure that it moves downward, upward, forward and backward. 

    ASSESSMENT CRITERION 7 
    The out-feed conveyor is checked to ensure that it moves forward and backwards. 

    SPECIFIC OUTCOME 2 
    Feed logs into the machine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Logs are fed one at a time into the ramp out-feed conveyor. 

    ASSESSMENT CRITERION 2 
    The log is fed in to the in-feed conveyor that has been tilted upward. 

    ASSESSMENT CRITERION 3 
    The in-feed conveyor is stopped and lowered as soon as the log reaches the debarker. 

    ASSESSMENT CRITERION 4 
    The log is conveyed until its front part is between the debarker. 

    SPECIFIC OUTCOME 3 
    Debark the logs. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Various size logs are debarked when the signals from the Saw Operator and Waste Remover are given as per production plans. 

    ASSESSMENT CRITERION 2 
    The logs are debarked in such a way that the first and the last part of each log are not tapered with. 

    ASSESSMENT CRITERION 3 
    Bark and pulp is removed to the required specifications. 

    ASSESSMENT CRITERION 4 
    Debarking is stopped when the Saw Operator or Waste Remover gives a signal to that effect. 

    ASSESSMENT CRITERION 5 
    Debarked logs are moved out of the out-feed conveyor if the signal from the Saw Operator is to that effect. 

    SPECIFIC OUTCOME 4 
    Shut down the machine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The two sides of the debarker are fully retracted. 

    ASSESSMENT CRITERION 2 
    The in-feed conveyor is tilted upward. 

    ASSESSMENT CRITERION 3 
    The machine is switched off as per work instructions. 

    ASSESSMENT CRITERION 4 
    The key is removed in accordance with safety standards. 

    ASSESSMENT CRITERION 5 
    The locking bar is inserted and the side debarker, which is on the cabin side, is locked as per work instructions. 

    SPECIFIC OUTCOME 5 
    Clean the machine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The barks on and around the debarker are removed and disposed of in the waste conveyor as per work instructions. 

    ASSESSMENT CRITERION 2 
    The barks that are under the debarking unit are removed and disposed of in the waste conveyor as per work instructions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA
  • Moderators must be registered as assessors with the relevant ETQA
  • Training providers must be accredited by the relevant ETQA
  • Moderation should include both internal and external moderation where applicable
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:
    Match manufacturing principles and practical application in the match manufacturing environment, in addition with knowledge of Safety/Environmental/Health issues.

  • ISO - Quality Awareness
  • Health and Safety (Section 14)
  • S.A.B.S. ISO 9002 QUALITY SYSTEM (Work Instructions)
  • Production process 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems, using critical and creative thinking in the match manufacturing area. 

    UNIT STANDARD CCFO WORKING 
    Work effectively in a team, group, organisation or community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, clean, store and deliver tools and instruments utilized in his/her work area in an effective and efficient manner. 

    UNIT STANDARD CCFO COMMUNICATING 
    Listen, understand instructions and verbally report in an effective manner to his/her superior. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    The Outcomes that Learners achieve will be judged subject to these being achieved:
  • Within the standard time prescribed by the organisation;
  • While following all the safety procedures required by the OSHACT and the workplace; and
  • Strictly according to the organisation's work instructions

    Values

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Reregistered  2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Amagema Development Consultants cc 
    2. Chep Sa Pty Ltd 
    3. CRK Designs (Pty) Ltd 
    4. ENB Training Service(PTY)Ltd 
    5. Future Discovery Training Academy CC 
    6. Imara Umbono Incorporated (Pty) Ltd 
    7. Imbewu Development Institute (Pty) Ltd 
    8. Lembede Investment Holdings (Pty) Ltd 
    9. Longata Consultant 
    10. Mavco Engineering (Pty) Ltd 
    11. Media Works 
    12. MGS Gcaba Contracting & Trading cc 
    13. Mwanga Training & Consulting (Pty) Ltd 
    14. New Business Initiative Management Consultancy 
    15. Nikwe Trading (Pty) Ltd 
    16. Nteko Investments 
    17. Phetho Concepts (Pty) Ltd 
    18. Prispiri (Pty) Ltd 
    19. Sekhukhune FET College - Central Office 
    20. Silungokuhle (Pty) Ltd 
    21. Tirhani SkillsTraining Pty Ltd 
    22. Valotech 274 (Pty) Ltd 
    23. VEB CELE & Associates (Pty) Ltd 
    24. Vicmat Consultants 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.