SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Assemble, install and dismantle exhibition stands 
SAQA US ID UNIT STANDARD TITLE
117837  Assemble, install and dismantle exhibition stands 
ORIGINATOR
SGB Marketing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 03 - Business, Commerce and Management Studies Marketing 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The person credited with this unit standard is able to identify and select the correct tools and components to construct an exhibition stand. They are also able to construct the stand according to health and safety standards and ensure the quality of the work done meets the requirements of the exhibitor and is done within an agreed time frame

The qualifying learner is capable of:
  • Identifying and selecting commonly used tools and equipment
  • Checking that all components are available on site
  • Describing various components and assembly techniques
  • Constructing, assembling and dismantling the exhibition stand according to instructions and specified time frames
  • Checking quality and finishing's according to correct standards
  • Applying housekeeping principles 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners accessing this unit standard will have demonstrated competence in Computer Literacy, Mathematical Literacy, Communication at NQF level 3 or equivalent. 

    UNIT STANDARD RANGE 
  • Tools include but are not limited to: power hand tool, hand tools, rented equipment
  • Components include but are not limited to: materials, hardware, measuring equipment
  • Safety procedures include but are not limited to: exhibition venue safety procedures, company safety procedures, legislative safety regulations
  • Housekeeping standards include but are not limited to: exhibition housekeeping standards, company/organisational housekeeping standards 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Identify and select commonly used tools and equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Tools used in the assembly of exhibition stands are listed according to organisational requirements. 

    ASSESSMENT CRITERION 2 
    The use of each tool listed is described according manufacturer's guidelines. 

    ASSESSMENT CRITERION 3 
    The purpose of each tool listed is explained as per manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    The tool to be used for specific assembly functions are listed and selected according to job requirements. 

    SPECIFIC OUTCOME 2 
    Check that all components are available on site. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Component requirements are determined according to job specifications. 

    ASSESSMENT CRITERION 2 
    Component requirements are prepared according to job specifications. 

    ASSESSMENT CRITERION 3 
    Component requirements are collected and delivered to the work site in required time frame. 

    ASSESSMENT CRITERION 4 
    Components are checked on site for use, effectiveness and functionality according to manufacturers' pre use check list. 

    SPECIFIC OUTCOME 3 
    Describe various components and assembly techniques. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Components used in the assembly process and there functions are described in relation to the assembly process. 

    ASSESSMENT CRITERION 2 
    Assembly techniques are listed and described using the correct procedure. 

    ASSESSMENT CRITERION 3 
    Assembly tools are listed and described according to manufacturer's instructions. 

    ASSESSMENT CRITERION 4 
    Assembly processes are identified and described within exhibition requirements. 

    ASSESSMENT CRITERION 5 
    Sequence of construction of various elements for assembly of stands is described in line with exhibition stand building guidelines. 

    SPECIFIC OUTCOME 4 
    Construct, assemble and dismantle the exhibition stand according to instructions and specified time frames. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Exhibition stand components are assessed and requirements are determined for assembling and dismantling in accordance with organisational requirements. 

    ASSESSMENT CRITERION 2 
    Exhibition stand assembly is prepared according to stand plan. 

    ASSESSMENT CRITERION 3 
    Assembly and dismantling equipment is collected throughout the exhibition within required time frame. 

    ASSESSMENT CRITERION 4 
    Exhibition stand is assembled and constructed and dismantle according to instructions and exhibition guidelines. 

    ASSESSMENT CRITERION 5 
    Exhibition stand is assembled and constructed and dismantle in a safe manner and in line with site safety procedures and regulations. 

    ASSESSMENT CRITERION 6 
    Exhibition stand is assembled and constructed and dismantle within agreed specified time frames. 

    SPECIFIC OUTCOME 5 
    Check quality and finish according to correct standards. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Quality standards are obtained and interpreted in line with organisational procedures. 

    ASSESSMENT CRITERION 2 
    An assembly and construction process is assessed against the required standards. 

    ASSESSMENT CRITERION 3 
    Finished products are compared to quality standard requirements. 

    ASSESSMENT CRITERION 4 
    Out of line areas are evaluated and corrective action listed and corrected within required timeframe. 

    ASSESSMENT CRITERION 5 
    Quality checks are implemented on final product in line with organisational requirements. 

    SPECIFIC OUTCOME 6 
    Apply housekeeping principles. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Organisational housekeeping standards are explained and understood according to job requirements. 

    ASSESSMENT CRITERION 2 
    Organisational housekeeping policies are applied within the exhibition. 

    ASSESSMENT CRITERION 3 
    Exhibition housekeeping standards are obtained and explained according to specifications. 

    ASSESSMENT CRITERION 4 
    Exhibition housekeeping standards are applied within an organised and efficient manner. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed (including through RPL) against this unit standard may apply to an assessment agency, assessor or provider institution accredited by the relevant ETQA or an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard or assessing this unit standard must be accredited as a provider with the relevant ETQA, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Moderation of assessment will be conducted by the relevant ETQA according to the policies and guidelines for assessment and moderation of that ETQA, at its discretion, in terms of agreements reached around assessment and moderation between various ETQAs (including professional bodies). 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • The use of hand tools
  • Organisational policies and procedures
  • Effective communication
  • Legislative requirements for building exhibition stands
  • Exhibition stand assembly techniques and processes
  • Exhibition stand installation procedures
  • Exhibition stand dismantling techniques processes 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems around the assembling and dismantling of exhibition stands. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others in order to ensure exhibition stands are assembled and dismantled in the correct sequence. 

    UNIT STANDARD CCFO ORGANISING 
    Organise oneself and one's activities when preparing to construct and dismantle an exhibition stand. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information pertaining to exhibition stand construction and dismantling procedures and processes. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively with colleagues and team members when building and dismantling an exhibition stand. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Understand the world as a set of related systems regarding effective exhibition stands. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  49276   Further Education and Training Certificate (FETC): Trade Exhibitions  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  SERVICES 
    Elective  49648   National Certificate: New Venture Creation (SMME)  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  SERVICES 
    Elective  67461   Further Education and Training Certificate: Event Support  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.