SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Perform basic spray painting 
SAQA US ID UNIT STANDARD TITLE
119737  Perform basic spray painting 
ORIGINATOR
SGB Vehicle Maintenance 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2026-06-30   2029-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
  • People in the field of manufacturing and engineering require the skills, values and knowledge reflected in this unit standard.
  • The learner is capable to prepare a part for paint application, apply spray paint techniques and identifying paint defects and understand their causes. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that the learners are already competent in:
  • Mathematical Literacy and Communication at NQF Level 1 

  • UNIT STANDARD RANGE 
  • The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.
  • All work is performed under constant supervision and according to workplace and workshop manual specifications and occupational safety, health and environmental legislation. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare to apply a paint application on a part. 
    OUTCOME RANGE 
  • Prepare includes mounting the part on trestles, clean and sand the part, wash and dry the part and identify the tools and equipment to be used.
  • Tools and equipment includes the applicable spray gun, air supply, paint mixture, personal protective equipment and masking material. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The part is prepared in accordance with the workplace procedures to receive the applicable paint application. 

    ASSESSMENT CRITERION 2 
    The ability to select and use the appropriate tools and equipment to perform the paint application is demonstrated. 

    ASSESSMENT CRITERION 3 
    The understanding of the process is confirmed by responding accurately to task related questions. 

    SPECIFIC OUTCOME 2 
    Perform spray painting techniques on the part in a safe and aware manner. 
    OUTCOME RANGE 
    Spray painting techniques includes distance control, application control, angle control, paint thickness and trigger control. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The appropriate spray paint techniques are demonstrated in accordance with the part construction. 

    ASSESSMENT CRITERION 2 
    The finished paint application is in accordance with the standards required for the paint and the part. 

    ASSESSMENT CRITERION 3 
    Safety precautionary measures to be taken are identified and clearly explained. 

    SPECIFIC OUTCOME 3 
    Interact with others to identify paint defects and understand their causes. 
    OUTCOME RANGE 
  • Paint defects include but not limited to runs, fish eyes, blisters and orange peel.
  • Causes include incorrect settings of the equipment, incorrect techniques, contamination, incorrect curing and incorrect preparation. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The knowledge and understanding of paint defects and their causes are demonstrated. 

    ASSESSMENT CRITERION 2 
    Explanations given are clear and appropriate examples are given. 

    ASSESSMENT CRITERION 3 
    Appropriate literature is referred to when explanations are given. 

    ASSESSMENT CRITERION 4 
    Learner is able to evaluate the benefits and difficulties of team work within his/her own work context. 

    ASSESSMENT CRITERION 5 
    The understanding of the process is confirmed by responding accurately to task related questions. 

    SPECIFIC OUTCOME 4 
    Discuss, explain and demonstrate the cleaning and storing procedures of spray painting equipment. 
    OUTCOME RANGE 
  • Clean and storage procedures includes the stripping and cleaning of the spray gun, disposal of excess paint and materials, the safe storage of the spray painting equipment. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    All the cleaning and storage procedures for the spray painting equipment is explained and demonstrated in accordance with the workplace requirements. 

    ASSESSMENT CRITERION 2 
    The disposal of excess paint and materials are explained and demonstrated in accordance with the workplace and SHE procedures. 

    ASSESSMENT CRITERION 3 
    The understanding of the process is confirmed by responding accurately to task related questions. 

    SPECIFIC OUTCOME 5 
    Deliver the sprayed part and restore the work area. 
    OUTCOME RANGE 
  • Deliver includes to the relevant department and the completion of the required documentation.
  • Restore the work area includes cleaning the work area. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The knowledge of delivering the sprayed part and the completion of the documentation in accordance with the workplace procedures are demonstrated. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the Unit Standard.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Names and functions of:
    > Tools and equipment
    > Paint and materials
  • Attributes, descriptions, characteristics and properties of:
    > Ferrous and non-ferrous metals
    > Plastic components and materials
    > Paint defects
  • Sensory cues:
    > What I see and feel in the process
  • Purpose of:
    > Trestles
    > Sanding
    > Curing
    > Cleaning and washing of the part
  • Regulations, legislation, agreements, policies, standards:
    > Company policies and procedures
    > SHE procedures
    > Quality procedures
  • Theory: rules, principles, laws:
    > Waste disposal
    > Good housekeeping 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
  • Identify and solve problems
    > Relating to the paint application on a loose part 

  • UNIT STANDARD CCFO WORKING 
  • Work effectively with others
    > When interacting with team members and colleagues during the planning, preparation, and completion of the paint application on a part 

  • UNIT STANDARD CCFO ORGANISING 
  • Organise and manage myself and my activities
    > When preparing the part and obtaining the tools and equipment
    > When managing resources and my time 

  • UNIT STANDARD CCFO COMMUNICATING 
  • Communicate effectively
    > When interacting with others so that I understand paint defects and their causes
    > When submitting the reports to the relevant department 

  • UNIT STANDARD CCFO DEMONSTRATING 
  • Demonstrate an understanding of the world as a set of related systems
    > When I can explain and justify my actions and procedures followed during the process 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  64410   National Certificate: Automotive Spray Painting  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  59099   National Certificate: Agricultural Equipment Service and Repair  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 
    Elective  65809   National Certificate: Automotive Manufacturing and Assembly  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  49689   National Certificate: Automotive Repair and Maintenance  Level 2  NQF Level 02  Passed the End Date -
    Status was "Registered" 
    2008-11-30  Was MERSETA until Last Date for Achievement 
    Elective  58781   National Certificate: Production Technology  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  58785   National Certificate: Production Technology  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.