SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Diagnose, test and repair electronic automobile fuel injection systems 
SAQA US ID UNIT STANDARD TITLE
12230  Diagnose, test and repair electronic automobile fuel injection systems 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  16 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2005-07-19  2008-07-19  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-07-19   2012-07-19  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
260639  Diagnose and repair fuel system components  Level 4  NQF Level 04   

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of autotronics.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the autotronics NQF level 4 qualification.

Qualifying learners can diagnose, test and repair electronic fuel injection systems on automobiles. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression.

The credits allocated to this unit standard assume that a learner has already learnt to:
  • Construct and test advanced electronic circuits
  • Service and repair electronic automobile ignition systems 

  • UNIT STANDARD RANGE 
    The scope and level of this unit standard is determined by the ranges as indicated under specific outcomes.

    The learner should be able to work autonomously. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Discuss and explain the operation op an electronic fuel injection system 
    OUTCOME RANGE 
    Electronic fuel injection systems include multipoint injection and throttle body injection (single point). 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 

    SPECIFIC OUTCOME 2 
    Read and interpret block diagrams of an electronic fuel injection system 
    OUTCOME RANGE 
    Block diagrams include diagrams of multipoint and throttle body (single point) fuel injection systems and related sub-systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 

    SPECIFIC OUTCOME 3 
    Identify and select electronic fuel injection system and sub-system components 
    OUTCOME RANGE 
    Electronic fuel injection components include electrically operated injectors electronic control unit.

    Sub-system components include air-intake system, fuel system, control system related components. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 

    SPECIFIC OUTCOME 4 
    Locate faults on an electronic fuel injection system 
    OUTCOME RANGE 
    Locate faults using appropriate measuring equipment, diagnostic procedures, manufacturer specific manuals.

    Measuring equipment include digital code checker, multi meter, test lamps oscilloscope, pressure gauge, vacuum pump, flow rate meter.

    Basic faults include hard starting, unstable idle, runs rough, injectors, sensors. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 

    SPECIFIC OUTCOME 5 
    Service electronic fuel injection systems 
    OUTCOME RANGE 
    Servicing includes electrical/electronic system, air system, fuel system. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 

    SPECIFIC OUTCOME 6 
    Apply the relevant system safety and servicing precautions 
    OUTCOME NOTES 
    Apply the relevant system safety and servicing precautions when working with electronic fuel injector systems. 
    OUTCOME RANGE 
    Servicing precautions include electrical, air system, fuel system and general as specified in the manufacturer's servicing manual.

    Safety precautions include work area safety, electrical safety, work area house keeping and vehicle cleanliness restored. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 

    SPECIFIC OUTCOME 7 
    Discuss and report incidents and problems related electronic fuel injector systems 
    OUTCOME NOTES 
    Discuss and report incidents and problems related electronic fuel injector systems and complete fault finding reports and requisitions. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Electronic fuel injection circuits diagrams and related symbols are read and interpreted correctly
    2. Serviced components are replaced/adjusted and meet specifications
    3. All defective components are marked, removed and reported
    4. Relevant documentation is correctly filled in.

    Indicators
    1. Appropriate components are chosen
    2. Appropriate voltage source is chosen when servicing
    3. Test equipment is selected and used correctly
    4. Safe working practices are adhered to while carrying out activities
    5. Appropriate fault finding and diagnostic procedures are used
    6. Manufacturers specifications are followed and adhered to

    Understanding confirmed
    Respond to "what if" and "why" questions covering
    1. Multipoint injection systems
    2. Throttle-body (single point) injection
    3. Control feed back loop
    4. Selection and use of components
    5. Diesel as an alternative fuel
    6. Diagnosis and testing of electronic fuel injection systems
    7. Consequences of not apply relevant safety practices and procedures
    8. Manufacturer's specification manuals 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assurer who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names and functions of:
  • Injectors
  • Sensors
  • Electronic control unit
  • Feed back loop control
  • Sub-systems
  • Diesel and petrol
  • Electronic fuel injector systems
    2. Purpose of:
  • Electronic control unit
  • Testing of circuits and components
  • Applying electronic safety
  • Diagnosing fault conditions
    3. Attributes, descriptions, characteristics and properties:
  • Fuel (diesel/petrol)
  • Electronic fuel injector systems
  • Electronic test equipment
    4. Sensory cues:
  • Use of senses to detect faulty component in a circuit
  • Use of sight to read circuit diagrams and test equipment
    5. Causes and effects, implications of:
  • Causes of damage and injury
  • Implications of incorrect source voltages
  • Implications incorrect testing applications
  • Implications of incorrect component selection
  • Implications of not observing manufacturer's specifications
    6. Procedures and techniques:
  • Safety procedures
  • Fault finding procedures for components and fuel injector circuits
  • Diagnostic techniques for fault location
  • Repairing procedures
    7. Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental legislation
    8. Theory: rules, principles laws:
  • Feedback control loop
  • Injector operation
  • Electronic control unit
  • Communication medium
  • Other related topics
    9. Relationships, systems:
  • Relationship between electronic fuel injection systems and electronic ignition systems
  • Relationship between electronic fuel injection systems and engine management systems
  • Relationship between electronic fuel injection systems and other sub-systems 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise situations that require action and correct when necessary 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • When servicing and repairing electronic automobile ignition systems 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • Apply the correct procedures for using, storing and looking after equipment, tools, test equipment, circuit diagrams and components 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Use common names for components
  • Use common names for test equipment
  • Use common names for systems 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology:
  • Use and apply scientific principles to electronic fuel injection systems 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate and understand of the world as a set of related systems:
  • Relate the use of electronic control systems on an automobile and that of the electronic fuel injection system 

  • UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 260639, which is "Diagnose and repair fuel system components", Level 4, 8 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  22860   National Certificate: Autotronics  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  MERSETA 
    Core  57450   National Diploma: Automotive Diagnostics and Repair  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Registered" 
    2009-02-18  Was MERSETA until Last Date for Achievement 
    Elective  58539   Further Education and Training Certificate: Automotive Repair and Maintenance  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered" 
    2009-02-18  Was MERSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.