SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Maintain pumps 
SAQA US ID UNIT STANDARD TITLE
13276  Maintain pumps 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  24 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2007-05-15  2008-06-25  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-06-25   2012-06-25  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
253497  Maintain positive displacement pumps  Level 3  NQF Level 03  10   

PURPOSE OF THE UNIT STANDARD 
Learners in the field of engineering require the skills, values and knowledge reflected in this unit standard.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for the National Certificate in Mechanical Engineering Fitting (NQF level 3) and related qualifications.

Qualifying learners are able to identify a range of pumps and their application and are able to inspect pumps, determine faults, assess requirements for repair, and remove, replace and bleed pumps in order to ensure operational integrity of the equipment. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as part of a progression. It is one of a series of unit standards for machine and equipment maintenance in the engineering area.

The credits allocated to this unit standard assume that a learner has already learned to perform routine maintenance. 

UNIT STANDARD RANGE 
  • The ranges as indicated under the specific outcomes determine the scope and level of this unit standard.
  • The learner should be able to work autonomously with minimal supervision and according to worksite and manufacturer specifications and occupational safety, health and environmental legislation.
  • Work is generally, but not exclusively, carried out in a team environment. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan and prepare for pump maintenance. 
    OUTCOME RANGE 
    Planning and preparation includes obtaining documentation and selecting appropriate tools, reading and interpreting engineering drawings and task instructions, identification of the appropriate pump as per task instruction, obtaining appropriate maintenance schedules, manufacturer's specifications and worksite procedures. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 2 
    Prepare site and equipment. 
    OUTCOME RANGE 
  • Preparation includes ensuring system is safe.
  • Making system safe includes isolation, depressurisation and applying protective equipment.
  • Isolation includes electrical and mechanical energy.
  • Equipment preparation includes decontamination of equipment. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 3 
    Inspect and assess pump condition. 
    OUTCOME NOTES 
    Identify problems and take corrective action. 
    OUTCOME RANGE 
    Problems include non-conforming components, low pressure, excessive heat, vibration and non-conforming pump priming. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 4 
    Maintain pump. 
    OUTCOME RANGE 
  • Pumps include positive displacement and centrifugal types.
  • Positive displacement pumps include gear, rotary and reciprocating pumps.
  • Centrifugal types include single and multi-stage centrifugal pumps.
  • Maintenance includes inspection for damage and wear, removal, shaft run out repair and fitment of pump components and assemblies.
  • Inspection includes measuring of components to verify compliance with manufacturer's specifications.
  • Damage includes signs and evidence of cavitation.
  • Consumables include mechanical seals, static seals and gaskets. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 5 
    Check pump for compliance with operational requirements. 
    OUTCOME RANGE 
  • Check includes visual inspection and performing associated tests.
  • Operational requirements include flow and pressure.
  • Characteristics include usage and operating specifications. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 6 
    Care for and store system maintenance tools and equipment. 
    OUTCOME RANGE 
    Tools and equipment include absorbent material, hand tools and cleaning equipment and fluids. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 7 
    Record information on work done. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 8 
    Discuss and explain incidents and problems related to pump maintenance. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 

  • SPECIFIC OUTCOME 9 
    Work safely with care for self, fellow workers, machines, equipment, materials and environment. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Site and equipment are prepared for pump maintenance.
    2. Pump is maintained to specifications.
    3. Pump is checked for compliance with operational requirements.
    4. Pump condition is recorded and reported.

    Indicators
    1. System is confirmed to be isolated.
    2. Pump is inspected and non-conformances identified.
    3. Pump maintenance requirements are determined.
    4. System maintenance consumables, parts and/or components are selected, fitted and adjusted to meet operational requirements and manufacturer's specifications.
    5. Maintained pump is checked for conformance with manufacturer specifications.
    6. Non-conforming consumables, damaged or sub-standard components and equipment are timeously identified and appropriate corrective action taken.
    7. Pump records are completed and processed.
    8. Work is carried out in a safe manner in accordance with schedules and manufacturer specifications.
    9. Maintenance process cycle time meets workplace requirements.
    10. A clean and tidy work environment is maintained.
    11. No delays are caused as a result of poor planning for pump maintenance process and identifying problems.
    12. Applicable health, safety and environmental procedures are adhered to.

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Pumps and their characteristics
  • The maintenance process - sequence, procedures and techniques
  • Tools and equipment used
  • Quality awareness: implications of system maintenance that do not comply with operational requirements
  • Applicable pump maintenance theory
  • Priming procedures
  • Safety
  • Reporting and documentation requirements

    2. Explain and discuss the implications of not adhering to the sequence of activities and operations as described in the specific outcomes and making decisions inappropriate to the task. 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • The assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. The assessor will (at the very least) be accredited and have a technical qualification in this learning area.
  • The learner can be assessed in the language of his/her choice although s/he has to report incidents or conditions to someone else. The learner will be assessed on his/her ability to report in the language commonly used in his/her working environment.
  • The learner will be assessed in the workplace but s/he can submit documents, projects, test results and assignments that were not produced in the workplace.
  • The learner can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Names & functions of:
  • Pump and components
  • Tools and equipment used in the pump maintenance process
  • Quality terminology and concepts

    Attributes, descriptions, characteristics & properties:
  • Typical pump faults and defects
  • End users of pump

    Sensory cues:
  • Sensory cues (what I see, hear, smell, feel) utilised for identifying pump related defects and non-conformances and the causes thereof

    Purpose of:
  • Preparing site and equipment for maintenance process
  • Maintaining pumps
  • Quality checks and procedures
  • Reporting problems
  • Priming pumps
  • Starting pump systems in specific sequence
  • Pump decontamination
  • Pressure testing

    Processes, events, causes and effects, implications:
  • Implications of non-conformance
  • Causes and responses to common problems
  • Maintenance sequence and process
  • Causes of cavitation
  • Implications and consequences of situations such as, e.g. using poor quality, damaged or faulty equipment in the maintenance process, delaying reports about problems in work area

    Procedures and techniques:
  • Identifying component defects
  • Maintaining pump components
  • Pump priming
  • Starting up
  • Draining and purging
  • Decontamination
  • Preparing consumables, replacement components/parts for maintenance
  • Pressure testing
  • Quality checks and procedures
  • Reporting procedures

    Regulations, legislation, agreements, policies, standards:
  • Applicable safety, health and environmental protection legislation and standards
  • Applicable company policies and procedures

    Theory: rules, principles, laws:
  • Applicable mechanical theory covering the maintenance of pumps, e.g. pressure, flow rate and area in a system
  • Applicable mathematical concepts

    Relationships, systems:
  • The relationship of the pump maintenance process to the production process 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Recognise and respond to non-conforming components/parts. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team:
  • Interact with colleagues and team members in order to maintain pump. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage my activities and myself:
  • According to procedures, following regular, consistent methodical work patterns;
  • Manage resources and my time. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Collect sensory and numeric information from the pump maintenance process;
  • Classify the information and identify deviations from the norm. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record outputs and incidents. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Understand and explain mechanical theory relevant to the pump maintenance process. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Understand and explain the purpose of pump maintenance to the production process;
  • Justify my actions as appropriate. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 253497, which is "Maintain positive displacement pumps", Level 3, 10 credits. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  23274   National Certificate: Mechanical Engineering: Fitting  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Core  48727   National Certificate: Sugar Manufacturing and Refining Technical Maintenance  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 
    Elective  58288   National Certificate: Electro-Mechanics  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ADCORP TECHNICAL TRAINING (PTY) LTD 
    2. ALLOYS HEAD OFFICE 
    3. ANGLO PLATINUM - ENGINEERING SKILLS TRAINING CENTRE 
    4. COLLIERY TRAINING COLLEGE (PTY) LTD 
    5. FOSKOR (PTY) LTD 
    6. HARMONY GOLD MINING CO LTD 
    7. KUMBA IRON ORE (SISHEN) 
    8. SASOL GLOBAL LEARNING 
    9. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.