SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Operate green lumber edging in green timber processing area of Lumber Mill 
SAQA US ID UNIT STANDARD TITLE
263687  Operate green lumber edging in green timber processing area of Lumber Mill 
ORIGINATOR
SGB Forestry 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard reflects the skills, values and knowledge required by people in the sub-field of Forestry and/or wood technology who must be able to operate green Lumber edging facilities in green timber processing area of Lumber Mill.

People credited with this Unit Standard are able to:
  • Collect all the prescribed setting up tools and equipment and cutting tools (blades, knives) for the green lumber edging.
  • Set up the green lumber edging equipment and install the required cutting tools, to prescribed standards, in the prescribed manner.
  • Operate the board edging equipment in the prescribed manner to produce lumber of the prescribed width.
  • Control the throughput and quality to maintain prescribed standards. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Mathematical Literacy and Communication at NQF Level 2 or equivalent.
  • Understanding of the detail of the Lumber Milling process, especially in the Wet Mill area.
  • Workplace procedures, health and safety measures, and environmental management principles equivalent to NQF Level 1. 
    		•

    UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Collect all the prescribed setting up tools and equipment and cutting tools (blades, knives) for the green lumber edging. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The correct tools for setting up the green lumber edging facilities are assembled timeously according to worksite procedures. 

    SPECIFIC OUTCOME 2 
    Set up the green lumber edging equipment and install the required cutting tools, to prescribed standards, in the prescribed manner. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The green lumber edging facility are set-up according to worksite procedures. 

    SPECIFIC OUTCOME 3 
    Operate the board edging equipment in the prescribed manner to produce lumber of the prescribed width. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Green lumber edging facilities are operated according to worksite procedures. 

    SPECIFIC OUTCOME 4 
    Control the throughput and quality to maintain prescribed standards. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    The throughput of green sawn products is achieved according to production schedule. 

    ASSESSMENT CRITERION 2 
    The quality of green sawn products is achieved according to production schedule. 

    ASSESSMENT CRITERION 3 
    Controls of the green lumber edging facility's throughput and quality are maintained according to worksite procedures. 

    SPECIFIC OUTCOME 5 
    Perform routine maintenance and lubrication. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    Routine maintenance and lubrication schedules are carried out according to worksite procedures. 

    ASSESSMENT CRITERION 2 
    The prescribed routine maintenance and lubrication schedules and reports are completed according to worksite procedures. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 4 or higher qualification, will assess the learner's competency. Only an Assessor with suitable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.

    Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The Learner will have acquired the detailed knowledge and understanding of and skills relating to:
  • The setting up of green lumber edging equipment and installation of appropriate cutting tools, to prescribed standards.
  • The operation of green lumber edging facilities as well as ancillary material handling equipment.
  • The maintaining product dimension and process throughput standards.
  • The routine maintenance of green lumber edging equipment as well as ancillary materials handling equipment.
  • Work procedures, safety and health measures, and environmental management principles equivalent to NQF Level 3. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66312   National Certificate: Lumber Milling  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 
    Elective  66329   National Certificate: Lumber Milling  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ASSURED VOCATIONAL SKILLS INSTITUTE PTY LTD 
    2. FUTURE DISCOVERY TRAINING ACADEMY 
    3. INYAPA VHUSIKU CONSULTING PTY LTD 
    4. SINOVUYOLETHU TRADING PTY LTD 
    5. THUBELIHLE GRADUATE INSTITUTE 
    6. TIRHANI SKILLSTRAINING PTY LTD 
    7. VEB CELE & ASSOCIATES PTY LTD 
    8. WORKPLACE AND ENTREPRENEURSHIP TALENT SOLUTIONS 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.