SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Hang frame saw blades and set up frame saw machine used in Lumber Mill 
SAQA US ID UNIT STANDARD TITLE
263716  Hang frame saw blades and set up frame saw machine used in Lumber Mill 
ORIGINATOR
SGB Forestry 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard reflects the skills, values and knowledge required by people in the sub-field of Forestry and/or wood technology who must be able to hang frame saw blades and set up frame saw machine used in Lumber Mill.

People credited with this Unit Standard are able to:
  • Hang frame saw blades and set up frame saw machine used in the Lumber Mill.
  • Describe the tools, gauges and equipment used to set up/hang a set of frame saw blades in a frame saw machine.
  • Hang a set of frame saw blades in a frame saw machine.
  • Check the alignment of blades in a frame saw machine after hanging. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:
  • Mathematical Literacy and Communication skills at NQF Level 1 or equivalent.
  • Understanding of the detail of Saw Doctoring in the Lumber Mill. 

  • UNIT STANDARD RANGE 
    The scope of this Unit Standard covers:
  • The environment including equipment, tools and instruments which can be described as the Saw Doctor Shop of a Lumber Mill.
  • All personnel involved in the activities in the Saw Doctor Shop.
  • All material handled and processed in the Saw Doctor Shop.
  • All the prescribed work place procedures and safety, health and environmental management procedures relating to the Saw Doctor Shop.
  • All the prescribed for hanging saw blades and setting up frame saw machine procedures and schedules, tools and materials used in the Saw Doctor Shop.
  • All the saws, knives and cutters handled and processed in the Saw Doctor Shop.

    The context of this Unit Standard relates to the training of a learner at NQF Level 2 in Saw Doctoring and specifically to set up and hang a set of frame saw blades in a frame saw machine used in the Lumber Mill.

    The level assigned to this Unit Standard, i.e. NQF Level 2 is appropriate because:
  • For foundational competence the learner has to demonstrate a well developed range of skills and the ability to make comparisons and interpret available information.
  • For practical competence the learner has to show the ability to operate in a number of contexts, some of which may be non-routine, make significant choices from a wide range of procedures and co-ordinate with others.
  • For reflexive competence the Learner has to demonstrate the ability to handle significant responsibility for quantity and quality of the learner's own output under general supervision, and possibly that of others. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Describe the tools, gauges and equipment used to set up/hang a set of frame saw blades in a frame saw machine used in the Lumber Mill. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools used to set up/hang a set of frame saw blades in a frame saw machine used in the Lumber Mill are described using the correct terminology. 

    ASSESSMENT CRITERION 2 
    Functions of tools, gauges and equipment used to set up/hang a set of frame saw blades are explained according to manufacture's specifications. 

    ASSESSMENT CRITERION 3 
    The interrelationship among tools, gauges and equipment used to set up/hang a set of frame saw blades is explained according to worksite procedures. 

    SPECIFIC OUTCOME 2 
    Hang a set of frame saw blades in a frame saw machine according to company's procedures. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Procedure to be followed in hanging a set of frame saw blades in a frame saw machine is explained according to specifications. 

    ASSESSMENT CRITERION 2 
    The importance of hanging a set of frame saw blades in a frame saw machine is explained according to quality requirements. 

    ASSESSMENT CRITERION 3 
    A set of frame saw blades in a frame saw machine is hanged according to company's procedures. 

    SPECIFIC OUTCOME 3 
    Check the alignment of blades after hanging in a frame saw machine. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The concept of alignment of blades is explained according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    A step-by-step procedure of checking alignment is explained according to standard operating procedures. 

    ASSESSMENT CRITERION 3 
    Alignment of blades after hanging in a frame saw machine is checked according to company's procedure. 

    SPECIFIC OUTCOME 4 
    Check the condition of all tools and gauges used to control the set up of a frame saw machine used in the Lumber Mill. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The tools and gauges used to control the set up of a frame saw machine used in the Lumber Mill is explained according to standard operating procedures. 

    ASSESSMENT CRITERION 2 
    The importance of checking tools and gauges used to control the set up of a frame saw machine, used in the Lumber Mill proves is explained according to quality requirements. 

    ASSESSMENT CRITERION 3 
    The checking of tools and gauges used to control the set up of a frame saw machine is carried out according to standard operating procedures. 

    SPECIFIC OUTCOME 5 
    Check the condition of the important frame saw machine parts. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Important frame saw machine parts are explained in terms of their function. 

    ASSESSMENT CRITERION 2 
    The condition of the important frame saw machine is assessed in accordance with company's procedures. 

    ASSESSMENT CRITERION 3 
    Status of the important frame saw machine is provided according to company's procedures. 

    SPECIFIC OUTCOME 6 
    Check the timing of operating sequences on automatic frame saw machines. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Timing of operating sequences on automatic frame saw machines is checked in line with company's procedure. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 4 or higher qualification, will assess the learner's competency. Only an Assessor with suitable first hand experience in process operations will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The learner will have acquired the detailed knowledge and understanding of and skills relating to:
  • Set up/hang frame saw blades in a frame saw machine used in the Lumber Mill.
  • Describe the tools, gauges and equipment used to set up/hang a set of frame saw blades in a frame saw machine.
  • Hang a set of frame saw blades in a frame saw machine.
  • Check the alignment of blades in a frame saw machine after hanging.
  • Work procedures, safety and health measures, and environmental management principles equivalent to NQF Level 2. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  66312   National Certificate: Lumber Milling  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ASSURED VOCATIONAL SKILLS INSTITUTE PTY LTD 
    2. FUTURE DISCOVERY TRAINING ACADEMY 
    3. SINOVUYOLETHU TRADING PTY LTD 
    4. Tirhani SkillsTraining Pty Ltd 
    5. VEB CELE & ASSOCIATES PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.