SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Read, interpret and produce basic engineering drawings 
SAQA US ID UNIT STANDARD TITLE
12215  Read, interpret and produce basic engineering drawings 
ORIGINATOR
SGB Manufacturing and Assembly Processes 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The skills, values and knowledge reflected in this unit standard are required by people in the field of engineering.

The learning outcomes in this unit standard also contribute to the exit level outcomes required for various NQF level 2 engineering qualifications.

Qualifying learners can read and interpret basic engineering drawings to be able to select components to be manufactured or assembled and produce freehand sketches and basic drawings using isometric, oblique and orthographic projection, including hidden detail and single plane sectional views. Drawings are limited to single components. These components may include components of pumps, gearboxes, hydraulic cylinders, support frames and holding devices. All drawings produced must meet required recognised international drawing standards. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard has been designed as the start of a progression. It is one of a series of unit standards for engineering drawing. 

UNIT STANDARD RANGE 
The scope and level of this unit standard is determined by the ranges as indicated under the specific outcomes.

All work is performed under supervision. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Discuss and explain basic engineering drawing concepts and material lists 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
Results achieved
1. Component identified and interpreted as per job requirements
2. Engineering drawings produced complies with job requirements
3. Engineering drawing concepts and material lists are explained

Indicators
1. Engineering drawings are correctly interpreted, taking into account line structures, dimensions and projections
2. Interpretation done in a methodical manner
3. Drawings are produced to international drawing standards

Understanding confirmed
1. Respond to 'what if' and 'why' questions covering:
  • Measurement and dimensions
  • Use of measurement scales
  • Concepts of basic geometry and unit of measurement
  • Line types
  • To scale drawings
  • Projections
  • Dimensioning 

  • SPECIFIC OUTCOME 2 
    Interpret basic engineering drawings 
    OUTCOME NOTES 
  • Identify and interpret component requirements
  • Interpret dimensions, instructions, symbols and conventions
  • Read material list 
  • OUTCOME RANGE 
    Engineering drawings interpreted are limited to first and third angle orthographic projection, isometric and oblique, including hidden detail and single plane sectional views. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Component identified and interpreted as per job requirements
    2. Engineering drawings produced complies with job requirements
    3. Engineering drawing concepts and material lists are explained

    Indicators
    1. Engineering drawings are correctly interpreted, taking into account line structures, dimensions and projections
    2. Interpretation done in a methodical manner
    3. Drawings are produced to international drawing standards

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Measurement and dimensions
  • Use of measurement scales
  • Concepts of basic geometry and unit of measurement
  • Line types
  • To scale drawings
  • Projections
  • Dimensioning 

  • SPECIFIC OUTCOME 3 
    Produce drawing 
    OUTCOME NOTES 
  • Prepare layout of drawing
  • Draw component
  • Dimension and label drawing 
  • OUTCOME RANGE 
    Engineering drawings produced are limited to first and third angle orthographic projection, isometric and oblique.

    Engineering drawings produced must meet required recognised international drawing standards. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Results achieved
    1. Component identified and interpreted as per job requirements
    2. Engineering drawings produced complies with job requirements
    3. Engineering drawing concepts and material lists are explained

    Indicators
    1. Engineering drawings are correctly interpreted, taking into account line structures, dimensions and projections
    2. Interpretation done in a methodical manner
    3. Drawings are produced to international drawing standards

    Understanding confirmed
    1. Respond to 'what if' and 'why' questions covering:
  • Measurement and dimensions
  • Use of measurement scales
  • Concepts of basic geometry and unit of measurement
  • Line types
  • To scale drawings
  • Projections
  • Dimensioning 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assuror who has jurisdiction over this field of learning. My assessor will (at the very least) be accredited and have a technical qualification in this learning area.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace.

    I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    1. Names and functions of:
  • Material lists
  • Engineering symbols, abbreviations, conventions (according to international drawing standards)
  • Geometrical constructions
  • Machining symbols

    2. Purpose of:
  • Engineering drawings

    3. Processes, events, causes and effects, implications:
  • Implications of incorrectly interpreting an engineering drawing
  • Implications of incorrectly producing an engineering drawing

    4. Procedures and techniques:
  • Drawing interpretation and sequence
  • Freehand sketching
  • For 1st and 3rd angle orthographic projection (simple sectional views)
  • For isometric drawings
  • For construction of geometrical shapes, e.g. polygons
  • For oblique drawings
  • For dimensioning and line types

    5. Theory: rules, principles, laws:
  • Units of measurement (conversion) and measurement scales
  • Basic geometry
  • Dimensioning

    6. Relationships, systems:
  • Relationship between engineering drawing and the manufacture of a product that meets customer specifications 


  • Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems:
  • Related to the interpretation of an engineering drawing 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage myself and my activities:
  • According to procedures, following regular, consistent methodical work patterns 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information:
  • Interpret information contained in engineering drawings
  • Make decisions based on information 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively:
  • Record work done 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically:
  • Relate appropriate theory to the interpretation of drawings 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems:
  • Understand and explain the relationship of the engineering drawing to the manufacturing process
  • Explain the importance of correctly interpreting the engineering drawing 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  58269   National Certificate: Electro-Mechanics  Level 2  NQF Level 02  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  59689   National Certificate: Mechanical Engineering  Level 2  NQF Level 02  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  23273   National Certificate: Mechanical Engineering: Fitting  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  23254   National Certificate: Mechanical Engineering: Fitting and Machining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  23277   National Certificate: Mechanical Engineering: Machining  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2008-06-25  MERSETA 
    Core  59729   National Certificate: Mechanical Handling (Rigging)  Level 2  NQF Level 02  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Core  67629   National Certificate: Mechatronics  Level 2  NQF Level 02  Reregistered  2023-06-30  MERSETA 
    Core  22770   National Certificate: Mechatronics  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2009-07-29  Was MERSETA until Last Date for Achievement 
    Core  49105   National Certificate: Furniture Making: Wood  Level 3  NQF Level 03  Reregistered  2023-06-30  FPMSETA 
    Core  23675   National Certificate: Management of Building Construction Processes  Level 5  Level TBA: Pre-2009 was L5  Reregistered  2023-06-30  CETA 
    Elective  58267   General Education and Training Certificate: Mining and Minerals Processes  Level 1  NQF Level 01  Reregistered  2023-06-30  MQA 
    Elective  49402   National Certificate in Steel Tube and Pipe Manufacturing (Seamless Hot-Finished OR Welded OR Cold-Formed)  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2012-06-30  MERSETA 
    Elective  22858   National Certificate: Autotronics  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2009-11-07  Was MERSETA until Last Date for Achievement 
    Elective  48806   National Certificate: Craft Production  Level 2  NQF Level 02  Reregistered  2023-06-30  CATHSSETA 
    Elective  59017   National Certificate: Tissue Conversion  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Academy for Construction Skills (Pty) Ltd (ACS) 
    2. ADCORP TECHNICAL TRAINING (PTY) LTD 
    3. AGB Finance 
    4. ALLOYS HEAD OFFICE 
    5. Amagema Development Consultants cc 
    6. ANGLO PLATINUM - ENGINEERING SKILLS TRAINING CENTRE 
    7. ArcelorMittal South Africa Ltd (VANDERBIJLPARK) (TP) 
    8. Assured Vocational Skills Institute (Pty) Ltd 
    9. AVENG (AFRICA) (PTY) LTD 
    10. Ayasaphe Trading cc 
    11. Babina Tlou Trading and Projects 001 
    12. Bafikile Skills & Consulting Services (Pty) Ltd 
    13. BAFOKENG RASIMONE MANAGEMENT SERVICES PTY LTD 
    14. BANA BA THARI MINING TRADING AND DEVELOPMENT ACADEMY 
    15. BARBERTON MINES (PTY) LTD 
    16. Better beginning trading and projects pty ltd 
    17. Bhungane Skills Development 
    18. Blue Horison Properties 53 (Pty) Ltd T/A Durnacol Skills Innovation Hu 
    19. BOKONI PLATINUM MINES (PTY) LTD 
    20. Bosasa Youth Development Centres (Pty) Ltd 
    21. CLEAN HEAT ENERGY SAVING SOLUTIONS (PTY) LTD 
    22. Coastal Kzn F.E.T. College - Swinton Road Campus 
    23. College of Cape Town 
    24. College of Cape Town (City Campus) 
    25. College of Production Technology 
    26. Construction Resource Development College 
    27. Coricraft Group PTY (Ltd) 
    28. Cradle Stars Trading Enterprise (Pty) Ltd 
    29. CULLINAN DIAMOND MINE PTY LTD 
    30. Customised Training Specialists Trust T/A CTS (PINETOWN) (TP) 
    31. Dego Consultants 
    32. Dinaka Business Management & Consulting 
    33. Dithipe Development Institute (Pty) Ltd 
    34. Dr M Investments 
    35. Duzi-Corp 56 
    36. Eastcape Midlands Public FET College - Uitenhage (High Street)Campus 
    37. Eastcoast Boards cc 
    38. EASTERN CROME MINES SAMANCOR 
    39. Ebotse Development and Training Centre 
    40. Ekurhuleni East College For TVET 
    41. Enstra Learning and Development Centre (Pty) Ltd (SPRINGS) (TP) 
    42. ERGO BUSINESS DEVELOPMENT ACADEMY NPC 
    43. False Bay Public FET College - Westlake Campus 
    44. FINSCH DIAMOND MINE(PTY) LTD 
    45. FOSKOR (PTY) LTD 
    46. Furniture World Training Centre 
    47. Furntech Mthatha 
    48. Future Discovery Training Academy CC 
    49. Gijima AST Holdings (Pty) Ltd T/A Fundi Training Centre (BENONI) (TP) 
    50. Gijima AST Holdings (Pty) Ltd T/A Industrial Skills Development (Tlhah 
    51. GLENCORE OPERATIONS SOUTH AFRICA PTY LTD 
    52. HARMONY GOLD MINING CO LTD 
    53. HHO Enterprise 
    54. Hoseah Training and Manufacturing NPC 
    55. Hytec Group of Companies T/A Hytec (KEMPTON PARK) (TP) 
    56. IALE School of Advance Learning and Education (Pty) Ltd 
    57. Ikamvelihle Youth Development (Pty) Ltd 
    58. Imbewu Development Institute (Pty) Ltd 
    59. IMPALA PLATINUM SERVICES LTD 
    60. INTERMASIKO CC 
    61. Inyathi Visions 
    62. IQ Skills Academy (PTY) LTD. 
    63. Joyboy Designs 
    64. Kgosi Mampuru Production Workshop 
    65. Khazimula Diamond (Pty) Ltd 
    66. KHUTALA MINING SERVICES PL 
    67. Kingdom Varsity College (Pty) Ltd 
    68. Kotton Wear (Pty) Ltd 
    69. KROONDAL OPERATIONS (PTY) LTD 
    70. Kumba Sishen HRD Centre 
    71. Leribe Training Solutions 
    72. Letaba TVET College 
    73. Longata Consultant 
    74. LYNAZY RESOURCES 
    75. Majuba FET College - Newcastle Technology Centre 
    76. Masikila Training Solutions (Pty) Ltd 
    77. MATHOME TRAINING AND DEVELOPMENT (PTY) LTD 
    78. Matimba Rigging & Training (SECUNDA) (TP) 
    79. MINERAL MINING TRAINING INSTITUTE(PTY) LTD 
    80. Mnambithi TVET College 
    81. MORTERBOARD TRAINING SOLUTIONS (PTY) LTD 
    82. Mphahle Consultancy (Pty) Ltd 
    83. MT & HR Training Consultants (Pty) Ltd (DURBAN) (TP) 
    84. MTL Training and Projects 
    85. Mudau Picture Framers 
    86. MURRAY & ROBERTS CEMENTATION (PTY)LTD 
    87. Ndwamato Training Solutions (Pty) Ltd 
    88. NEW AFRICA SKILLS DEVELOPMENT 
    89. NORTHAM PLATINUM LTD 
    90. Nqothu Projects (PTY) LTD 
    91. Ntunzela Trading Enterprise 
    92. Orbit FET College - Rustenburg Campus 
    93. OTP 
    94. Oyama Kulwazi Training & Consulting (Pty) Ltd 
    95. PALABORA COPPER (PTY) LTD 
    96. Parowkloof Investment 
    97. PhD Projects SA (Pty) Ltd 
    98. PPC LTD SANDTON OFFICE 
    99. PROGRESSIVE TRAINING DEVELOPMENT AND PROJECTS (PTY) LTD 
    100. Qualfurn Training & Projects 
    101. Re Tshepeng Holdings 
    102. RICHARDS BAY MINING PTY LTD 
    103. Rivoni Training N Communications 
    104. RUBICON COMMUNICATIONS 
    105. Rustenburg Platinum Mines - Union Section 
    106. Salabedla Contracting and Trading (Pty) Ltd 
    107. SAMANCOR LTD PERSONNEL DEP 
    108. Seacrest Investments 156 (Pty) Ltd 
    109. SEDIBENG TRAINING CENTRE 
    110. SEJ Skills Academy Pty Ltd 
    111. Sekhukhune FET College - Central Office 
    112. SHAFT SINKERS MINING PTY LTD 
    113. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 
    114. SIBANYE GOLD LIMITED - BEATRIX DIVISION 
    115. SIBANYE GOLD LIMITED - KLOOF DIVISION 
    116. SIBANYE RUSTENBURG PLATINUM MINES PTY LTD 
    117. Silalele Consultants (Pty) Ltd 
    118. Silungokuhle (Pty) Ltd 
    119. SISHEN IRON ORE COMPANY 
    120. Sivile Housing Association RSA 
    121. SIYANDA BAKGATLA PLATINUM MINE 
    122. Skills Priority 
    123. Skills To Furnish International NPO 
    124. Tekmation (Pty) Ltd T/A Tekmation Training Institute (DURBAN) (TP) 
    125. The Brokers Learning Centre 
    126. The Finishing College (Pty) Ltd 
    127. THE FURNITURE TECHNOLOGY CENTRE - CAPE TOWN 
    128. The Furniture Technology Centre - KwaMashu 
    129. The Furniture Technology Centre - Nyanga 
    130. The Furniture Technology Centre Umzimkhulu 
    131. THE SAJ COMPETENCY TRAINING INSTITUTE CC 
    132. Thunderflex3 Pty (Ltd) 
    133. Tidlobi Developmental Activities NPC 
    134. Tirhani SkillsTraining Pty Ltd 
    135. Tjeka Training Matters Pty Ltd 
    136. TRAIN THE NATION AND ASSOCIATES (PTY) LTD 
    137. Ubucubu Home Industries 
    138. Umbuso Training Services 
    139. Umnotho We Afrika Foundation NPC 
    140. Uphiwekonke Holdings (Pty) Ltd 
    141. Valotech 274 (Pty) Ltd 
    142. VEB CELE & Associates (Pty) Ltd 
    143. Volkswagen of South Africa (Pty) Ltd - Technical Learning Academy (UIT 
    144. Wandy B Solutions (Pty) Ltd 
    145. WESTERN PLATINUM MINE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.