All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Operate overhead/gantry cranes |
SAQA US ID | UNIT STANDARD TITLE | |||
242976 | Operate overhead/gantry cranes | |||
ORIGINATOR | ||||
SGB Transport and Logistics Operations | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 11 - Services | Transport, Operations and Logistics | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 2 | NQF Level 02 | 5 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2018-07-01 | 2023-06-30 | SAQA 06120/18 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2026-06-30 | 2029-06-30 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
PURPOSE OF THE UNIT STANDARD |
The person credited with this unit standard is able to understand the functions, safety and suitability of the crane prior to utilization in the freight handling industry. Learners are also able to inspect and record the operational fitness of the components of a crane and be able to access available support systems and emergency services in case of incidents and accidents while operating a overhead/gantry crane.
The qualifying learner is capable of: |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
It is assumed that learners accessing this unit standard will have demonstrated competent in:
|
UNIT STANDARD RANGE |
> C30: Overhead Pendant Controlled. > C31: Overhead Cab controlled. > S Tandem Lifts. > T Special Categories. |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Demonstrate knowledge of the functions of a crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The main functions of Overhead Crane's are explained in terms of manufacturer's specifications. |
ASSESSMENT CRITERION 2 |
The operation of all major components are explained in terms of their functions. |
ASSESSMENT CRITERION 3 |
All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
The maximum operating capacities are explained in terms of the designed crane capabilities. |
ASSESSMENT CRITERION 5 |
Warnings from crane indicators and gauges are explained according to manufacturer's specifications. |
ASSESSMENT CRITERION 6 |
Corrective actions are described or demonstrated in terms of neutralising warnings received. |
SPECIFIC OUTCOME 2 |
Identify the safety and suitability of the crane type prior to utilisation. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Suitability of the crane is identified according to load characteristics, equipment manufacturers' requirements and environmental conditions. |
ASSESSMENT CRITERION 2 |
Operational capability of lifting equipment is assessed according to correct Safe Work Load of slings. |
ASSESSMENT CRITERION 3 |
The influence of load/range is explained according to load/range characteristics, manufacturers' requirements an environmental conditions. |
ASSESSMENT CRITERION 4 |
A pendant controlled overhead crane is operated in accordance with operating specifications. |
SPECIFIC OUTCOME 3 |
Inspect and record the operational fitness of the components of a crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Pre-operational checks are carried out according to required checklist. |
ASSESSMENT CRITERION 2 |
Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and record keeping using a logbook. |
ASSESSMENT CRITERION 3 |
Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified according to operational procedures. |
ASSESSMENT CRITERION RANGE |
Fault and defects include but are not limited to: structural components, hoisting systems, cab, fastenings, and ropes/chains. |
SPECIFIC OUTCOME 4 |
Operate an overhead crane in a safe and competent manner. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The purpose and functions of the various controls is explained in accordance with their designed use and manufactures specifications. |
ASSESSMENT CRITERION 2 |
Controls are used to manoeuvre the crane within manufacturer's specifications to reduce load swings and related safety hazards. |
ASSESSMENT CRITERION 3 |
Crane performance is monitored and corrective action is taken when necessary and in accordance with manufacturer's manual. |
ASSESSMENT CRITERION 4 |
Crane is operated without risk of damage, loss to crane, property, or injury to people. |
ASSESSMENT CRITERION 5 |
Hazards specific to operating an overhead crane are explained and the ways to minimise the hazards are explained in terms of potential damage to crane, property and injury to people. |
ASSESSMENT CRITERION 6 |
Start-up and shutdown procedures are followed according to manufacturer's manual. |
ASSESSMENT CRITERION 7 |
Crane is stowed according to manufacturer's and company/works requirements. |
SPECIFIC OUTCOME 5 |
Access available support systems and emergency services in case of incidents and accidents. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The most appropriate course of action in relation to the purpose of the various controls is explained in accordance with company procedures. |
ASSESSMENT CRITERION 2 |
The handling and storage of the load is explained according to safe working practices. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
The following embedded knowledge is addressed in an integrated way in the unit standard:
|
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Identify and solve problems using critical and creative thinking when analysing the load configuration with multiple hoists to ensure the correct selection of lifting equipment, for a safe lifting operation. |
UNIT STANDARD CCFO COLLECTING |
Collect, analyse, organise and critically evaluate knowledge of various load weight, size and type for the purpose of selecting and utilising the most appropriate (safe and efficient) method of operating. |
UNIT STANDARD CCFO DEMONSTRATING |
Demonstrate initiative in selecting the most appropriate gear and equipment dependent on crane types, freight characteristics and environmental conditions. |
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
REREGISTRATION HISTORY |
As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. |
UNIT STANDARD NOTES |
N/A |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 66512 | National Certificate: Foundry Operations | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2013-11-07 | MERSETA |
Elective | 59729 | National Certificate: Mechanical Handling (Rigging) | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 79686 | National Certificate: Metal and Engineering Manufacturing Processes | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 58718 | National Certificate: Metals Processing | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 64189 | National Certificate: Metals Production | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 49450 | National Certificate: Plastics Manufacturing | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 61809 | National Certificate: Tyre Repair and Maintenance | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48794 | National Certificate in Quality Checking of Tyres and Tyre Components | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 71989 | National Certificate: Automotive Components: Manufacturing and Assembly | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 58862 | National Certificate: Electro-Mechanical Winding | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 58720 | National Certificate: Engineering Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 66449 | National Certificate: Foundry Operations | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2013-11-07 | MERSETA |
Elective | 64829 | National Certificate: Lifting Machine Operations | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
Elective | 59669 | National Certificate: Mechanical Engineering: Fitting | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 23255 | National Certificate: Mechanical Engineering: Fitting and Machining | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 91926 | National Certificate: Mechanical Engineering: Machining and Tooling | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 67609 | National Certificate: Mechatronics | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 79666 | National Certificate: Metal and Engineering Manufacturing Processes | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 64190 | National Certificate: Metals Production | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 49449 | National Certificate: Plastics Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 36155 | National Certificate: Polymer Composite Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 79407 | National Certificate: Polymer Compound Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 21012 | National Certificate: Power and Telecommunication Cable Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 24217 | National Certificate: Thermoplastic Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48798 | National Certificate: Tyre and Tyre Component Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48795 | National Certificate: Tyre Assembly | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 57886 | National Certificate: Welding Application and Practice | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
1. | A.I.R Training, Consulting & Services |
2. | AAH Skills and Development |
3. | ABC Training and Staff Solutions |
4. | Access Training Centre (Pty) Ltd |
5. | ACT SKILLS DEVELOPMENT |
6. | AETA Training Solutions |
7. | Africa Training Centre |
8. | Aveng (Africa) Limited |
9. | Bev Short Training Consultants |
10. | Bonticom (Pty) Ltd |
11. | BPL Academy |
12. | Breerivier Training Development CC Mossel Bay |
13. | Breerivier Training Development CC Worcester |
14. | Certified Training Solutions (PTY) Ltd |
15. | Certified Training Solutions PTY Ltd |
16. | ChamCham Corporation (PTY) Ltd |
17. | Circleway College |
18. | Continuous Development Training |
19. | Devolden Group |
20. | Distinctive Choice 907 CC |
21. | Diversity technology Training Institute |
22. | DMG Global Training Solutions (Pty) Ltd |
23. | Durban Driver Training Centre Pty Ltd |
24. | Educon Training and Development PTY LTD |
25. | Edutech Training (Pty) Ltd |
26. | Elite Squad Holdings |
27. | Excellect 209 (PTY) LTD |
28. | Excellect 209 PTY LTD |
29. | Exclusive Training and Services |
30. | Exclusive Training Services |
31. | Fantique Trade 1092 |
32. | FBT Consultants CC |
33. | Global Learning Services |
34. | He and She Driver Training Centre |
35. | Hlanganisa Safety Solutions (Pty) Ltd |
36. | Humrec Human Resource Training |
37. | Indaba Training |
38. | Inkqubela Consultants |
39. | Innovative Shared Services |
40. | Insimbi Engineering & Training |
41. | Jerico Training and Fire Industries |
42. | Juan-Tech Rentals Pty Ltd |
43. | Juan-Tech Training Centre |
44. | kholwa management and training consultancy (pty) Ltd |
45. | KPI Consulting Pty LTD |
46. | Ksk Training Centre (Pty) Ltd |
47. | Kwazulu Natal Training & Development cc |
48. | Kwetsima (Pty) Ltd. |
49. | Learning Exchange Pty (Ltd) |
50. | Lehway Safty Training and Risk Management |
51. | Lessons Online (Pty) Ltd |
52. | Lifting Machinery Training |
53. | Little Treehouse Holdings (PTY) Ltd |
54. | MadibengGeneral Suppliers |
55. | Magas Training and Development (Pty) Ltd |
56. | Makwedeng Training |
57. | MAMMOET SOUTHERN AFRICA (PTY) LTD |
58. | Marholeni M Trading Enterprize |
59. | MCMEGZ Training |
60. | Merrod Trading 122 Pty Ltd |
61. | Metro Minds |
62. | Miclos Trading (Pty) Ltd |
63. | NOSA LOGISTICS PTY LTD |
64. | OHS Legislative Training CC |
65. | OHS TRAINING AFRICA |
66. | Orion Industrial Training Services (Pty) Ltd |
67. | OSR Trading |
68. | Precision skills development and training |
69. | PRO Skills Development (Pty) Ltd |
70. | PRO Skills Development Pty Ltd |
71. | Pro-Edu Accredited Training International cc |
72. | R Tech Training (Pty) Ltd |
73. | RAZUNA TRAINING |
74. | Reef Training Solutions (Pty) Ltd |
75. | Renaissance Skills Training |
76. | Renntek Pty Ltd |
77. | Rhino Recruiting Services CC |
78. | Safety Haz Training (PTY) Ltd |
79. | Seng''khona Trading Enterprise 129 cc |
80. | Shipping And Transport College Pty Ltd |
81. | SKILLS DYNAMICS AFRICA PTY LTD |
82. | Skills Priority |
83. | SVA Training |
84. | The Skills Authority |
85. | The Skills Matrix |
86. | Thwala Training Services (Pty) Ltd |
87. | Toyota South Africa Motors Pty Ltd |
88. | Training Consultant and SD College |
89. | Training Force |
90. | Transnet Rail Engineering Germiston Training Centre |
91. | Transnet Academy - Faculty of Maritime |
92. | Transnet Maritime School of Excellence |
93. | Transvaal Training |
94. | Ubuntu Asssessors Solutions |
95. | Uthingo Training Centre |
96. | Various Aligned Safety And Training |
97. | Wheelman S A |
98. | Wild Boar Fire cc |
99. | YouLearnIT Academy |
100. | Zikholwe Training and Development (pty) Ltd |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |