SAQA

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE:

National Certificate: Food and Beverage Manufacturing Technology: Dried Dairy Products Technologist

SAQA QUAL ID	QUALIFICATION TITLE
20521	National Certificate: Food and Beverage Manufacturing Technology: Dried Dairy Products Technologist
ORIGINATOR
SGB Dairy Technology
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY			NQF SUB-FRAMEWORK
Was FOODBEV until Last Date for Achievement			OQSF - Occupational Qualifications Sub-framework
QUALIFICATION TYPE	FIELD		SUBFIELD
National Certificate	Field 06 - Manufacturing, Engineering and Technology		Manufacturing and Assembly
ABET BAND	MINIMUM CREDITS	PRE-2009 NQF LEVEL	NQF LEVEL	QUAL CLASS
Undefined	150	Level 4	NQF Level 04	Regular-Unit Stds Based
REGISTRATION STATUS		SAQA DECISION NUMBER	REGISTRATION START DATE	REGISTRATION END DATE
Passed the End Date - Status was "Reregistered"		SAQA 0160/05	2005-08-23	2006-04-20
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2007-04-20		2010-04-20

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This qualification replaces:

Qual ID	Qualification Title	Pre-2009 NQF Level	NQF Level	Min Credits	Replacement Status
10829	National Certificate: Dairy Powder Manufacturing	Level 4	Level TBA: Pre-2009 was L4	120	Complete

This qualification is replaced by:

Qual ID	Qualification Title	Pre-2009 NQF Level	NQF Level	Min Credits	Replacement Status
50306	Further Education and Training Certificate: Dairy Manufacturing Technology	Level 4	NQF Level 04	120	Complete

PURPOSE AND RATIONALE OF THE QUALIFICATION

A person acquiring this qualification will be able to manufacture safe, quality assured and packaged dried dairy products by operating, controlling and maintaining a dried dairy product manufacturing line, from raw materials until the final manufactured product is ready to be sold in the retail market.

Rationale of the qualification:

This qualification reflects the workplace-based needs of the dairy industry that are expressed by employers and employees, both now and for the future. This qualification provides the learner with accessibility to be employed within the dairy industry and provides the flexibility to articulate in the dairy manufacturing environment with a wide variety of specialisation options and articulation within the food manufacturing industry.

The level of flexibility within the range of electives will allow the individual to pursue a career within specialised dairy manufacturing, food and beverage manufacturing management, food and beverage manufacturing supervision and food and beverage process artisan.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

Knowledge, comprehension and application of language, mathematics, natural science and technology principles at NQF level 3 and the core component within the national certificate in food and beverage processing: dairy primary processing NQF level 3.

Recognition of Prior Learning:

This qualification may be achieved in part or completely through the recognition of prior learning, which includes formal, informal and non-formal learning and work experience.

RECOGNISE PREVIOUS LEARNING?

QUALIFICATION RULES

Fundamental: 36 credits

Core: 52 credits

Elective: the learner must choose a minimum of 62 credits
Total: 150 credits

EXIT LEVEL OUTCOMES

Qualifying learners can:

Exit level outcome 1: Evaporate of liquid dairy based mixture.
Exit level outcome 2: Manufacture dried dairy based products using roller drying technology.
Exit level outcome 3: Manufacture spray dried dairy products using spray drying technology.
Exit level outcome 4: Manufacture instant milk powder products.
Exit level outcome 5: Pack dried dairy products.

ASSOCIATED ASSESSMENT CRITERIA

Assessment criteria associated with Exit level Outcome 1:

Raw milk in a silo is sampled, analysed and evaluated in terms of its acceptability for dried dairy based products manufacturing.

The importance of micro-organisms in the manufacturing of dried dairy based products is understood and comprehended.

The functional components of milk are identified and their application in dried dairy based products manufacturing is understood and comprehended.

Food raw materials used for dairy based mixtures are mixed and blended for processing according to standard operating procedures.

Evaporate a liquid dairy based mixture using a falling or rising film evaporator according to standard operating procedures.

Assessment criteria associated with Exit level Outcome 2:

Evaporated or concentrated dairy based mixture is dried using roller drying technology according to standard operating procedures.

Roller dried dairy based products are sampled and analysed for compositional and sensory quality attributes, and an evaluation is made in terms of its conformance to legal and company standards.

Assessment criteria associated with Exit level Outcome 3:

Evaporated or concentrated dairy based mixture is dried using spray drying technology according to standard operating procedures.

Spray dried dairy products are sampled and analysed for compositional and sensory quality attributes, and an evaluation is made in terms of its conformance to legal and company standards.

Assessment criteria associated with Exit level Outcome 4:

Evaporated or concentrated milk is spray dried and instantised using spray drying and instantising technology according to standard operating procedures.

Instant milk powder products are sampled and analysed for compositional and sensory quality attributes, and an evaluation is made in terms of its conformance to legal and company standards.

Assessment criteria associated with Exit level Outcome 5:

Dry dairy products are packed and the packaging process line is operated and controlled according to standard operating procedures.

The packaged products is collated and shrink-wrapped according to standard operating procedures and by using automated equipment.

Integrated Assessment:

The applied competence (practical, foundational and reflexive competencies) of this qualification will be able to manufacture safe, quality assured and packaged dried dairy products by operating, controlling and maintaining a dried dairy product manufacturing line, from raw materials until the final manufactured product is ready to be sold in the retail market.

The identification and solving of problems, team work, organising one-self, the using of applied science, the implication of actions and reactions in the world as a set of related systems must be assessed during any combination of practical, foundational and reflexive competencies assessment methods and tools to determine the whole person development and integration of applied knowledge and skills.

The preparation to processing, cleaning and sanitising, first line maintenance and quality assurance related to processing in the workplace can be assessed in one application.

Applicable assessment tool(s) to establish the foundational, reflexive and embedded knowledge to problem solving and application of the world as a set of related systems within the processing environment.

A detailed portfolio of evidence is required to proof the practical, applied and foundational competencies of the learner.

Assessors and moderators should develop and conduct their own integrated assessment by making use of a range of formative and summative assessment methods. Assessors should assess and give credit for the evidence of learning that has already been acquired through formal, informal and non-formal learning and work experience.

Unit standards in the qualification must be used to assess specific and critical cross-field outcomes. During integrated assessments the assessor should make use of formative and summative assessment methods and should assess combinations of practical, applied, foundational and reflexive competencies.

INTERNATIONAL COMPARABILITY

Benchmarking was done against the NVQ from Britain, SVQ from Scotland as well as Australian, New Zealand and German qualifications. International comparability could be found for a qualification on this level. On the New Zealand Qualifications Authority Framework, two qualifications could be found to support this qualification. These qualifications are the National certificate in Dairy Manufacturing at level 4 and a National certificate in Food and related processing also at level 4.

ARTICULATION OPTIONS

This qualification will enable the qualifying learner to articulate to other dairy manufacturing specialisation domains at NQF level 4 and will allow progress to the national diploma in food and beverage manufacturing management at NQF level 6, the certificate in food and beverage manufacturing supervision at NQF level 4 and the certificate in food and beverage process artisan at NQF level 4.

MODERATION OPTIONS

Anyone assessing a learner or moderating the assessment of a learner against this Qualification must be registered as an assessor with the relevant ETQA.

Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant ETQA.

Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQA's policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed immediately below.

Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards, exit level outcomes as well as the integrated competence described in the qualification.

Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA.

CRITERIA FOR THE REGISTRATION OF ASSESSORS

Assessors need experience in the following areas:

Interpersonal skills, subject matter and assessment.

The assessor needs to be competent in the planning and conducting of assessment of learning outcomes and in the design and development of assessments as described in the unit standards Plan and conduct assessment of learning outcomes NQF level 5. Subject matter experience must be well developed within the field of dried dairy products manufacturing. The assessor must have completed a similar qualification with a minimum of 6-12 months field experience after he/she has completed the qualification or a food science and technology qualification on level 5 or higher. The subject matter experience of the assessor can be established by recognition of prior learning.

Assessors need to be registered with the Food and Beverage Education and Training Quality Assurance Body.

NOTES

This qualification has been replaced by 50306: Further Education and Training Certificate: Dairy Manufacturing Technology, NQF Level 4, 120 credits.

This qualification replaces 10829: National Certificate: Dairy Powder Manufacturing, NQF Level 4, 120 credits.

UNIT STANDARDS:

	ID	UNIT STANDARD TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Core	9042	Demonstrate an understanding of food or beverage safety practices and procedures in the food or beverage manufacturing environment	Level 3	NQF Level 03	7
Core	9152	Evaluate the acceptability of raw milk in a silo for further processing	Level 3	NQF Level 03	5
Core	9181	Demonstrate knowledge of the functional components of milk	Level 4	NQF Level 04	7
Core	9180	Demonstrate knowledge of the significance of micro-organisms in the manufacturing of dairy products	Level 4	NQF Level 04	8
Core	9192	Evaluate the compositional and sensory quality of dried dairy products	Level 4	NQF Level 04	5
Core	9182	Evaporate a liquid food product using a falling or rising film evaporator	Level 4	NQF Level 04	20
Fundamental	9015	Apply knowledge of statistics and probability to critically interrogate and effectively communicate findings on life related problems	Level 4	NQF Level 04	6
Fundamental	8974	Engage in sustained oral communication and evaluate spoken texts	Level 4	NQF Level 04	5
Fundamental	8975	Read analyse and respond to a variety of texts	Level 4	NQF Level 04	5
Fundamental	9016	Represent analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts	Level 4	NQF Level 04	4
Fundamental	8979	Use language and communication in occupational learning programmes	Level 4	NQF Level 04	5
Fundamental	7468	Use mathematics to investigate and monitor the financial aspects of personal, business, national and international issues	Level 4	NQF Level 04	6
Fundamental	8976	Write for a wide range of contexts	Level 4	NQF Level 04	5
Elective	9112	Bulk pack dry food products in bags	Level 1	NQF Level 01	2
Elective	9136	Collate and shrink-wrap packaged products using automated wrapping equipment	Level 2	NQF Level 02	4
Elective	8766	Mix or blend food raw materials for processing using automated equipment	Level 2	NQF Level 02	4
Elective	9131	Operate and control the filling and seaming of cans for food or beverage products	Level 2	NQF Level 02	12
Elective	9130	Operate and control the forming, filling and hermetic sealing of plastic sachets or bags for food products	Level 2	NQF Level 02	10
Elective	9155	Control lactose crystallisation in sweetened condensed milk or concentrated whey	Level 3	NQF Level 03	8
Elective	12316	Perform first line maintenance on manufacturing or packing equipment	Level 3	NQF Level 03	7
Elective	9043	Implement and maintain a food or beverage production quality assurance system	Level 4	NQF Level 04	8
Elective	9187	Manufacture a dry food product by means of a roller dryer	Level 4	NQF Level 04	30
Elective	9186	Manufacture a spray dried food powder from an evaporated mixture	Level 4	NQF Level 04	30
Elective	9188	Manufacture instant food powder by means of a spray dryer	Level 4	NQF Level 04	30

LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION:

When qualifications are replaced, some (but not all) of their learning programmes are moved to the replacement qualifications. If a learning programme appears to be missing from here, please check the replaced qualification.

NONE

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE